Re: "kaweth" usb ethernet driver in 2.4?

[Michael Rothwell]

Thanks. Has Brad Hards made his version available somewhere?
-M

----- Original Message -----
From: "Eric Sandeen" <[e-mail]>
To: "Michael Rothwell" <[e-mail]>
Cc: <[e-mail]>
Sent: Sunday, February 04, 2001 9:30 AM
Subject: Re: "kaweth" usb ethernet driver in 2.4?

> Michael Rothwell wrote:
>
> > > It also doesn't seem to work in 2.2.  :)  The original development of
> > > this driver was going on at http://drivers.rd.ilan.net/kaweth/ but
there
> > > have been no updates for quite some time.
> >
> > Well, it doesn't work you _you_ on 2.2, obviously. But it works for us
> > and other people. Can you provide any information to diagnose the
> > problem you're having?
>
> I'm sorry, I should have provided that info.  I searched the 'net, and
> saw many people with problems on several mailing lists, and saw no
> solutions, or reports of success, so I assumed that it was a widespread,
> possibly even known, problem with the driver.
>
> I'll preface this by saying that Brad Hards sent me an updated version
> that works much better, at least as long as the module is loaded before
> the device is plugged in.
>
> But here's what I get with a 2.2 kernel and the stock driver:
>
> Kawasaki USB->Ethernet Driver loading...
> usb.c: registered new driver kaweth
> usb.c: USB new device connect, assigned device number 2
> Kawasaki Device Probe (Device number:2): 0x0846:0x1001
> Device at c2192600
> Descriptor length: 12 type: 1
> NetGear EA-101 connected...
> Reading kaweth configuration
> Request type: c0  Request: 0  Value: 0 Index: 0 Length: 12
> usb-uhci.c: interrupt, status 2, frame# 1929
> kaweth control message failed (urb addr: c2c05ca0)
> usb_control/bulk_msg: timeout
> usb-uhci.c: interrupt, status 2, frame# 851
> Actual length: 0, length 18
> Resetting...
> usb-uhci.c: interrupt, status 2, frame# 854
> Downloading firmware at c48abb6c to kaweth device at c31be000...
> Firmware length: 3838
> Request type: 40  Request: ff  Value: 0 Index: 0 Length: efe
> usb-uhci.c: interrupt, status 2, frame# 871
> kaweth control message failed (urb addr: c213ab60)
> usb-uhci.c: interrupt, status 2, frame# 877
> usb-uhci.c: interrupt, status 2, frame# 882
> Actual length: 0, length 3838
> Error downloading firmware (-110), no net device created
>