00:0a.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01)
00:0b.0 Multimedia video controller: Brooktree Corporation Bt848 TV with DMA push (rev 11)
Since linux-2.4.0-test5 (which worked), I have tried the following
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.50 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Bt8xx card found (0).
bttv0: Bt848 (rev 17) at 00:0b.0, irq: 10, latency: 32, memory: 0xdd000000
bttv0: model: BT848( *** UNKNOWN *** ) [autodetected]
i2c-core.o: adapter bt848 #0 registered as adapter 0.
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
i2c-core.o: driver i2c TV tuner driver registered.
tuner: chip found @ 0x61
bttv0: i2c attach [Temic PAL]
i2c-core.o: client [Temic PAL] registered to adapter [bt848 #0](pos. 0).
es1370: version v0.34 time 21:31:10 Feb 8 2001
es1370: found adapter at io 0xa800 irq 5
es1370: features: joystick off, line in, mic impedance 0
Currently I'm using xawtv:
This is xawtv-3.30, running on Linux/i686 (2.4.1-ac6)
In .xawtv I have:
mixer = line2
It seems to both aumix and xawtv that there is a mixer there,
but no sound comes out, even when line2 is on, and volume=100%.
Otherwise the sound card works fine.
-- Med venlig hilsen / Regards Netdriftgruppen / Network Management Group UNI-C
Tlf./Phone +45 35 87 89 41 Mail: UNI-C Fax. +45 35 87 89 90 Bygning 304 E-mail: email@example.com DK-2800 Lyngby
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org Please read the FAQ at http://www.tux.org/lkml/