kernel 2.4.0/1/1-ac15 and ncr53c810a

[Wolfgang Teichmann]

Hello,

I have problems using my scanner (HP C6270A connected to ncr53c810a)
with xsane.

I always get the error message:

error during read: Error during device I/O

Feb 15 23:57:27 localhost kernel: Attached scsi generic sg2 at scsi0,
channel 0, id 4, lun 0, type 3
Feb 15 23:57:27 localhost kernel: ncr53c810a-0-<4,*>: target did not
report SYNC.
Feb 15 23:58:01 localhost kernel: scsi : aborting command due to timeout
: pid 0, scsi0, channel 0, id 4, lun 0 Read (6) 00 00 7b 66 00
Feb 15 23:58:01 localhost kernel: ncr53c8xx_abort: pid=0
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: SCSI host 0 abort (pid 0) timed out -
resetting
Feb 15 23:58:04 localhost kernel: SCSI bus is being reset for host 0
channel 0.
Feb 15 23:58:04 localhost kernel: ncr53c8xx_reset: pid=0 reset_flags=2
serial_number=1099 serial_number_at_timeout=1099
Feb 15 23:58:04 localhost kernel: ncr53c810a-0: restart (scsi reset).

With kernel 2.2.x I have no problems accessing the scanner with xsane.

Any idea?