> On 20 Feb 2001, Manfred Bartz wrote:
> > I have 3 NICs (2*DEC, 1*3c509) in my gateway (P75, 40M RAM).
> >
> > tulip.o in 2.4.1 insists on selecting 10baseT, no command
> > line option can convince it otherwise. tulip.o in 2.2.16 auto
> > detected media and worked fine.
>
> A little info on your cards would be helpful. With well over 100
> different types of Tulip cards, I can't just read your mind :)
The problem seems to be generic. It is always related to media
selection and occurs with at least 3 different NICs which are based
on the 21040 and 21041 chips.
> lspci, tulip-diag, and dmesg output would all be helpful.
I have not got lspci but since the driver reports the correct IRQ and
IO-ports that should be no issue. (I'll install lspci if necessary).
Outputs of dmesg, tulip-diag, and some other info is now at:
<http://www.logi.cc/tulip/>
> > de4x5.o in 2.4.1 needs to be told the media, then works fine.
> > de4x5.o in 2.2.16 auto detected media and worked fine.
>
> de4x5 is going away, anyway.
Pity. It works and I really like the manual options interface... :/
-- Manfred - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/