Re: IDE trouble under 2.2.19pre16 with Hedrick's IDE patch

[Mike Fedyk]

Shane Wegner wrote:
> 
> Hi,
> 
> Whenever I write a substantial amount of data (200mb) to
> disk, I get these messages.  The disks lock for about 10
> seconds and then come back for about 10 seconds again.
> This continues until the data is successfully written.
> 
> ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> hde: DMA disabled
It looks like you have set your drive for a dma mode it doesn't support.

HTH

Mike