Re: IDE on 2.4.2

[Steven Walter]

On Sun, Mar 11, 2001 at 10:03:48PM +0100, Martin Diehl wrote:
> On Fri, 9 Mar 2001, Lawrence MacIntyre wrote:
> 
> > Uniform MultiPlatform E-IDE driver Revision 6.31
> > ide: assuminmg 33 MHz system bus speed for PIO modes: override with
> > idebus=xx
> > SIS5513: IDE controller on PCI bus 00 dev 09
> > PCI: Assigned IRQ 14 for device 00:01.1
> > SIS5513: chipset revision 208
> > SIS5513: not 100% native mode: will probe irqs later
> > SIS5597
> >     ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
> >     ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
> > hda: Maxtor 90640D4, ATA DISK drive
> > hdc: CD-ROM CDU55E, ATAPI CD/DVD-ROM drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > 
> > At this point, the machine hangs...
> 
> interesting, I see the same thing except it hangs not before the disk
> drives are initialized but afterwards, when initializing the CD-ROM
> drives. (Compiling ide-cd as module permits successful boot but hangs
> on insmod). This is with SiS5513 rev 208 IDE function from SiS5591
> chipset with CONFIG_BLK_DEV_SIS5513 and autotune enabled (default).

I have this exact same chip on my board (a PCChips M599-LMR or something
like that) which works flawlessly on 2.4.2, even with UDMA66.
-- 
-Steven
Never ask a geek why, just nod your head and slowly back away.