Take care,
Khalid Aziz <khalid@fc.hp.com> writes:
> 11,3 is "Multiple read errors". You can find all of the ASC and ASCQ
> listed in any SCSI spec document. You can find the SCSI-2 specs at
> <ftp://ftp.t10.org/t10/drafts/s2/s2-r10l.pdf>.
>
> --
> Khalid
>
> Camm Maguire wrote:
> >
> > Thank you again for your help. While I do seem to get more errors
> > with the ide-tape driver, I am also seeing some problems on further
> > examination which are common to both ide-tape and st over ide-scsi, so
> > perhaps I have a bad drive or tape.
> >
> > When trying to mt eom, for example, I get
> >
> > =============================================================================
> > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
> > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
> > ASC=20 ASCQ= 0
> > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
> > st0: Can't read block limits.
> > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
> > st0: Density 45, tape length: 0, drv buffer: 1
> > st0: Block size: 512, buffer size: 32768 (64 blocks).
> > st0: Retensioning tape.
> > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
> > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
> > ASC=20 ASCQ= 0
> > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
> > st0: Can't read block limits.
> > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
> > st0: Density 45, tape length: 0, drv buffer: 1
> > st0: Block size: 512, buffer size: 32768 (64 blocks).
> > st0: Spacing tape forward over 16383 filemarks.
> > st0: Spacing to end of recorded medium.
> > st0: Error: 28000000, cmd: 11 3 0 0 0 0 Len: 16
> > Info fld=0x3feb, Deferred st09:00: sns = f1 3
> > ASC=11 ASCQ= 3
> > Raw sense data:0xf1 0x00 0x03 0x00 0x00 0x3f 0xeb 0x0a 0x00 0x00 0x00 0x00 0x11 0x03 0x00 0x00
> > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16
> > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5
> > ASC=20 ASCQ= 0
> > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
> > st0: Can't read block limits.
> > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8
> > st0: Density 45, tape length: 0, drv buffer: 1
> > st0: Block size: 512, buffer size: 32768 (64 blocks).
> > st0: Rewinding tape.
> > =============================================================================
> >
> > What is the 11,3? Where can I find these codes listed? Why is the
> > drive having trouble finding the end of the tape? I'll be testing
> > more tapes soon, but this definitely happens with at least several.
> > The mt command returned to the prompt with 'Input/ouput error'.
> >
> > Many Thanks again,
> >
>
> --
> ====================================================================
> Khalid Aziz Linux Development Laboratory
> (970)898-9214 Hewlett-Packard
> khalid@fc.hp.com Fort Collins, CO
>
>
-- Camm Maguire camm@enhanced.com ========================================================================== "The earth is but one country, and mankind its citizens." -- Baha'u'llah - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/