Cool Road Runner

Steffen Grunewald (steffen@gfz-potsdam.de)
Fri, 30 Mar 2001 17:59:00 +0200


Hi all,

we're trying to get a Cool Road Runner board by Lippert (see
http://www.emjembedded.com/products/single/coolroadr.html)
to run under Linux (SuSE 6.4, kernel 2.2.14).

The CompactFlash disk (a 32 MB SanDisk) is recognized as /dev/hda,
but the system fails to see the /dev/hdb disk (an IBM DARA-206000
jumpered as slave). When the IDE driver loads, it displays
hda:pio, hdb:DMA - and yes, the BIOS assigns UDMA33 to the slave drive
while the master is detected as Mode1.
The IDE controller is a CS5530.

Is there a chance that a newer kernel will detect the second disk?

If I disconnect the slave drive, I can see "hdb:pio" :-((( but not
the drive, of course B-)

Any ideas?

Steffen

-- 
 Steffen Grunewald | GFZ | PB 2.2 | Telegrafenberg E3 | D-14473 Potsdam
 » email: steffen(at)gfz-potsdam.de | fax/fon: +49-331-288-1266/-1245 «
    It has just been discovered that research causes cancer in rats.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/