2. I compiled 2 kernels(one with BigMem, one without).
Both are SMP kernels.
The one without BigMem supports works just fine.
The only difference is that I turned on BigMem support, and recompiled kernel and modules.
When I try to mount other disks through amd, it says: "No such file or directory."
The log file for amd(/var/log/amd) after initial startup info says:
----
Apr 16 13:54:11 slinux01 amd[11530]/map: Trying mount of
/etc/amd.fsmap on /fs fstype toplvl
Apr 16 13:54:11 slinux01 amd[11530]/map: Trying mount of /etc/amd.rmap
on /r fstype toplvl
Apr 16 13:54:11 slinux01 amd[11531]/error: /fs: mount: No such device
Apr 16 13:54:11 slinux01 amd[11533]/error: /r: mount: No such device
----
When I try to restart amd, the log file (/var/log/messages)
has the following lines associated with amd startup
----
Apr 16 13:54:11 slinux01 amd: Apr 16 13:54:11 slinux01 amd[11529]/info:
using configuration file /etc/amd.conf
Apr 16 13:54:11 slinux01 insmod:
/lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o: insmod nfs failed
Apr 16 13:54:11 slinux01 insmod:
/lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o: insmod nfs failed
Apr 16 13:54:12 slinux01 amd: amd startup succeeded
----
Noting that the insmod nfs failure may be responsible, I try to "insmod nfs" as root as follows:
----insmod nfs
Using /lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o
/lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o: unresolved symbol
kunmap_high
/lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o: unresolved symbol
highmem_start_page
/lib/modules/2.4.3-01INAsmpBM/kernel/fs/nfs/nfs.o: unresolved symbol
kmap_high
----insmod nfs
3. nfs module, BigMem kernel
4.
----
Linux version 2.4.3-01INAsmpBM (root@slinux01.nas.nasa.gov)
(gcc version 2.96 20000731 (Red Hat Linux 7.0)) #4 SMP Thu Apr 12
17:35:48 PDT 2001
----
5. No oops.
6. simply try "cd /net/machine_name" under 2.4.3 SMP, BigMem kernel
7.1 Output from ver_linux follows:
----
Linux slinux01.nas.nasa.gov 2.4.3-01INAsmpBM #4 SMP Thu Apr 12 17:35:48
PDT 2001 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.10.0.18
util-linux 2.10m
modutils 2.3.14
e2fsprogs 1.18
pcmcia-cs 3.1.19
Linux C Library > libc.2.2
Dynamic linker (ldd) 2.2
Procps 2.0.7
Net-tools 1.56
Console-tools 0.3.3
Sh-utils 2.0
Modules Loaded nfsd lockd sunrpc eepro100 agpgart i810_audio
ac97_codec soundcore aic7xxx sd_mod scsi_mod
----
7.2
----
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 797.978
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 1592.52
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 797.978
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse
bogomips : 1595.80
----
7.3
----
nfsd 70376 8 (autoclean)
lockd 51056 1 (autoclean) [nfsd]
sunrpc 65048 1 (autoclean) [nfsd lockd]
eepro100 18616 1 (autoclean)
agpgart 24568 0 (unused)
i810_audio 15172 0
ac97_codec 7908 0 [i810_audio]
soundcore 4612 2 [i810_audio]
aic7xxx 123500 4
sd_mod 11124 4
scsi_mod 97436 2 [aic7xxx sd_mod]
----
7.5
----
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial(auto)
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7000-7fff : PCI Bus #04
7000-703f : Intel Corporation 82557 [Ethernet Pro 100]
7000-703f : eepro100
8000-9fff : PCI Bus #02
8000-8fff : PCI Bus #03
8000-80ff : Adaptec 7899P
8400-84ff : Adaptec 7899P (#2)
b000-b0ff : Intel Corporation 82801AA AC'97 Audio
b000-b0ff : Intel ICH 82801AA
b400-b43f : Intel Corporation 82801AA AC'97 Audio
b400-b43f : Intel ICH 82801AA
b480-b48f : Intel Corporation 82801AA SMBus
b4c0-b4df : Intel Corporation 82801AA USB
b800-b80f : Intel Corporation 82801AA IDE
b800-b807 : ide0
----
----
00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-3ffeffff : System RAM
00100000-0021b540 : Kernel code
0021b541-0028321f : Kernel data
3fff0000-3fff7fff : ACPI Tables
3fff8000-3fffffff : ACPI Non-volatile Storage
80100000-804fffff : PCI Bus #04
80100000-80100fff : Intel Corporation 82557 [Ethernet Pro 100]
80100000-80100fff : eepro100
80200000-802fffff : Intel Corporation 82557 [Ethernet Pro 100]
80500000-806fffff : PCI Bus #02
80500000-805fffff : PCI Bus #03
80500000-80500fff : Intel Corporation 82806AA PCI64 Hub Advanced
Programmabl
e Interrupt Controller
80501000-80501fff : Adaptec 7899P
80501000-80501fff : aic7xxx
80502000-80502fff : Adaptec 7899P (#2)
80502000-80502fff : aic7xxx
80700000-820fffff : PCI Bus #01
81000000-81ffffff : nVidia Corporation Quadro (GeForce 256 GL)
82500000-900fffff : PCI Bus #01
88000000-8fffffff : nVidia Corporation Quadro (GeForce 256 GL)
e0000000-e3ffffff : Intel Corporation 82840 840 (Carmel) Chipset Host
Bridge (Hu
b A)
fff80000-ffffffff : reserved
----
7.5
----
00:00.0 Host bridge: Intel Corporation 82840 840 (Carmel) Chipset Host
Bridge (Hub A) (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 1025
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 82840 840 (Carmel) Chipset AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: 80700000-820fffff
Prefetchable memory behind bridge: 82500000-900fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 PCI bridge: Intel Corporation 82840 840 (Carmel) Chipset PCI
Bridge (Hub B) (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: 80500000-806fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: 80100000-804fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if
80 [Master])
Subsystem: Intel Corporation 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at b800 [size=16]
00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corporation 82801AA USB
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 17
Region 4: I/O ports at b4c0 [size=32]
00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev 02)
Subsystem: Intel Corporation 82801AA SMBus
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at b480 [size=16]
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA AC'97
Audio (rev 02)
Subsystem: Acer Incorporated [ALI]: Unknown device 1025
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at b000 [size=256]
Region 1: I/O ports at b400 [size=64]
01:00.0 VGA compatible controller: nVidia Corporation Quadro (GeForce
256 GL) (rev 10) (prog-if 00 [VGA])
Subsystem: Silicon Graphics, Inc.: Unknown device 9002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at 81000000 (32-bit, non-prefetchable)
[size=16M]
Region 1: Memory at 88000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 80700000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
02:1f.0 PCI bridge: Intel Corporation 82806AA PCI64 Hub PCI Bridge (rev
02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=02, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00008000-00008fff
Memory behind bridge: 80500000-805fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
03:00.0 PIC: Intel Corporation 82806AA PCI64 Hub Advanced Programmable
Interrupt Controller (rev 01) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corporation 82806AA PCI64 Hub Advanced
Programmable Interrupt Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at 80500000 (32-bit, non-prefetchable)
[size=4K]
03:03.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 0006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 8000 [disabled] [size=256]
Region 1: Memory at 80501000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at 80520000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:03.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Acer Incorporated [ALI]: Unknown device 0006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (10000ns min, 6250ns max), cache line size 08
Interrupt: pin B routed to IRQ 19
BIST result: 00
Region 0: I/O ports at 8400 [disabled] [size=256]
Region 1: Memory at 80502000 (64-bit, non-prefetchable)
[size=4K]
Expansion ROM at 80540000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
04:0c.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100]
(rev 08)
Subsystem: Intel Corporation 82559 Fast Ethernet LAN on
Motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: Memory at 80100000 (32-bit, non-prefetchable)
[size=4K]
Region 1: I/O ports at 7000 [size=64]
Region 2: Memory at 80200000 (32-bit, non-prefetchable)
[size=1M]
Expansion ROM at 80300000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
----
7.6
----
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST318436LW Rev: 0010
Type: Direct-Access ANSI SCSI revision: 03
----
--
----------------------------------------------------
Shishir Pandya,PhD M/S T27B-1
Code INR NASA Ames Research Center
Moffett Field, CA 94035
pandya@nas.nasa.gov
(650)604-3981 http://www.engr.ucdavis.edu/~spandya
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/