Re: 8139too.c and 2.4.4-pre1 kernel burp

[(no name)]

hello jeff !

with the 8139too v. 0.9.16 from
http://sourceforge.net/projects/gkernel/ and kernel 2.4.4-pre3, i
see no more errors of the "too much work at interrupt" type.

i used to see the errors even under normal load, starting
immediately after booting.
so far, i did some nfs and flood-pinging, and all seems to be well.

if you want me to run more specific tests, let me know.

thanks,

jörn

Jeff Garzik wrote:
> 
> Jörn Nettingsmeier wrote:
> >
> > jeff garzik wrote:
> > >
> > >       Frank Jacobberger wrote:
> > >       >
> > >       > Jeff,
> > >       >
> > >       > I noticed the following on boot with 2.4.4-pre1:
> > >       >
> > >       > kernel: eth0: Too much work at interrupt, IntrStatus=0x0001.
> > >       >
> > >       > What is this saying to me :)
> > >
> > >       How often does this occur?  A lot, or just once or twice?
> >
> > i'm seeing this, too. it occurs *very* often during access of the
> > card:
> >
> > Apr 13 11:08:11 kleineronkel kernel: eth0: Too much work at
> > interrupt, IntrStatus=0x0001.
> > Apr 13 11:08:44 kleineronkel last message repeated 869 times
> > Apr 13 11:09:29 kleineronkel last message repeated 59 times
> > Apr 13 11:10:04 kleineronkel last message repeated 2 times
> > Apr 13 11:11:43 kleineronkel last message repeated 149 times
> > Apr 13 11:11:59 kleineronkel last message repeated 4 times
> > Apr 13 11:13:01 kleineronkel last message repeated 7 times
> > Apr 13 11:15:01 kleineronkel kernel: eth0: Too much work at
> > interrupt, IntrStatus=0x0001.
> > Apr 13 11:16:15 kleineronkel last message repeated 6 times
> > Apr 13 11:16:15 kleineronkel kernel: eth0: Too much work at
> > interrupt, IntrStatus=0x0001.
> > Apr 13 11:18:01 kleineronkel last message repeated 5 times
> > Apr 13 11:18:06 kleineronkel modprobe: modprobe: Can't locate module
> > net-pf-10
> > Apr 13 11:18:08 kleineronkel sshd[1631]: Accepted password for ROOT
> > from 127.0.0.1 port 32948
> > Apr 13 11:18:08 kleineronkel modprobe: modprobe: Can't locate module
> > net-pf-10
> > Apr 13 11:18:09 kleineronkel kernel: eth0: Too much work at
> > interrupt, IntrStatus=0x0001.
> >
> > and so on.
> >
> > it might be important that i'm sharing the IRQ:
> >
> > kleineronkel:~ # cat /proc/interrupts
> >            CPU0       CPU1
> >   0:     294470     246477    IO-APIC-edge  timer
> >   1:       4552       5266    IO-APIC-edge  keyboard
> >   2:          0          0          XT-PIC  cascade
> >   8:          2          0    IO-APIC-edge  rtc
> >  12:      29084      29205    IO-APIC-edge  PS/2 Mouse
> >  14:          4          4    IO-APIC-edge  ide0
> >  15:       4924       5704    IO-APIC-edge  ide1
> >  16:       1256       1373   IO-APIC-level  EMU10K1
> >  17:          0          0   IO-APIC-level  Ensoniq AudioPCI
> >  19:      76145      76111   IO-APIC-level  aic7xxx, eth0
> > NMI:          0          0
> > LOC:     540865     540843
> > ERR:          0
> >
> > and yes, this is an SMP box (dual p3/600) with a bx chipset.
> >
> > please keep me on cc:, as i have only archive access to LKML.
> > thanks.
> > btw, jeff, the old  "kernel: eth0: Abnormal interrupt, status
> > 0000000[2,6]" messages have disappeared since 2.4.3 or so.
> 
> I've fixed this locally.  I just need to test all the RTL chips (five or
> six variants) before I send the next patch to Linus/Alan...
> 
> --
> Jeff Garzik       | Sam: "Mind if I drive?"
> Building 1024     | Max: "Not if you don't mind me clawing at the dash
> MandrakeSoft      |       and shrieking like a cheerleader."

-- 
Jörn Nettingsmeier     
home://Kurfürstenstr.49.45138.Essen.Germany      
phone://+49.201.491621
http://www.folkwang-hochschule.de/~nettings/
http://www.linuxdj.com/audio/lad/