Managed to get it to fail again, first attempt. As a control, booting
ac12 detected the joystick OK, as normal. Attached is the output of
/proc/ioports in the failed session. Sadly, there is no difference
in the output of /proc/ioports when running ac12.
Stephen
--------------F0DF9FEC1EDB7F5566910979
Content-Type: text/plain; charset=us-ascii;
name="ioports-2.4.4-ac13"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ioports-2.4.4-ac13"
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0200-0207 : ns558-pnp
0213-0213 : isapnp read
0220-022f : soundblaster
02f8-02ff : serial(auto)
0330-0333 : MPU-401 UART
0376-0376 : ide1
0388-038b : Yamaha OPL3
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0620-0623 : sound driver (AWE32)
0a20-0a23 : sound driver (AWE32)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
0e20-0e23 : sound driver (AWE32)
f000-f00f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
f000-f007 : ide0
f008-f00f : ide1
--------------F0DF9FEC1EDB7F5566910979--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/