AVM A1 pcmcia, kernel 2.4.5-ac11 problem

Boenisch Joerg (joerg.boenisch@siemens.at)
Tue, 12 Jun 2001 10:37:58 +0200


Dear experts,

I hope not to be off topic! (In that case could you tell me where to ask?)
I can´t get my avm a1 pcmcia card running.

My system:
kernel 2.4.5-ac11
pcmcia-cs-3.1.26

Kernel of course is compiled with ISDN support and low-level AVM-A1-PCMCIA.
After installation in /lib/modules hisax.o can be found, but not avma1_cs.o
.

My /etc/pcmcia/config looks like:
---begin---cut---
device "avma1_cs"
class "isdn" module "net/slhc", "misc/isdn", "misc/hisax" opts
"type=26 protocol=2", "avma1_cs"
---cut---
card "AVM ISDN-Controller A1"
version "AVM", "ISDN A"
bind "avma1_cs"
---cut---end---

syslog:

cardmgr[1070]: executing: ´modprobe hisax type=26 protocol=2´
kenel: HiSax: Linux Driver for passive ISDN cards
kenel: HiSax: Version 3.5 (module)
kenel: HiSax: Layer1 Revision 2.41.6.3
kenel: HiSax: Layer2 Revision 2.25.6.2
kenel: HiSax: TeiMgr Revision 2.17.6.2
kenel: HiSax: Layer3 Revision 2.17.6.3
kenel: HiSax: LinkLayer Revision 2.51.6.3
kenel: HiSax: Approval certification valid
kenel: HiSax: Approved with ELSA Microlink PCI cards
kenel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
kenel: HiSax: approved with Sedlbauer Speedfax + cards
cardmgr[1070]: executing: ´modprobe avma1_cs´
cardmgr[1070]: + modprobe: Can´t locate module avma1_cs
cardmgr[1070]: modprobe exited with status 255
cardmgr[1070]: module /lib/modules/2.4.5-ac11/pcmcia/avma1_cs.o not
available
cardmgr[1070]: get dev info on socket 1 failed: Resource temporarily
unavailable

------

Maybe someone can tell me, what´s wrong or what i have forgotten to do.

TIA!
Joerg Boenisch
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/