Re: PROBLEM: [2.4.6] kernel BUG at softirq.c:206!

Andrew Morton (andrewm@uow.edu.au)
Fri, 06 Jul 2001 02:11:23 +1000


Alan Cox wrote:
>
> > My money is on the unconditional sti()'s in the cyrix code.
>
> Possibly but the diff is wrong

But it'll still work :)

--- linux-2.4.6/init/main.c Wed Jul 4 18:21:32 2001
+++ lk-ext3/init/main.c Fri Jul 6 02:06:12 2001
@@ -523,8 +523,8 @@ asmlinkage void __init start_kernel(void
trap_init();
init_IRQ();
sched_init();
- time_init();
softirq_init();
+ time_init();

/*
* HACK ALERT! This is early. We're enabling the console before
--- linux-2.4.6/arch/i386/kernel/setup.c Mon May 28 13:31:46 2001
+++ lk-ext3/arch/i386/kernel/setup.c Fri Jul 6 01:59:37 2001
@@ -1243,11 +1255,13 @@ static int __init init_amd(struct cpuinf
/*
* Read Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static inline void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
+ unsigned long flags;

/* we test for DEVID by checking whether CCR3 is writable */
+ save_flags(flags);
cli();
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, ccr3 ^ 0x80);
@@ -1272,7 +1286,7 @@ static inline void do_cyrix_devid(unsign
*dir0 = getCx86(CX86_DIR0);
*dir1 = getCx86(CX86_DIR1);
}
- sti();
+ restore_flags(flags);
}

/*
@@ -1316,7 +1330,9 @@ static void __init check_cx686_slop(stru
{
if (Cx86_dir0_msb == 3) {
unsigned char ccr3, ccr5;
+ unsigned long flags;

+ save_flags(flags);
cli();
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
@@ -1324,7 +1340,7 @@ static void __init check_cx686_slop(stru
if (ccr5 & 2)
setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
- sti();
+ restore_flags(flags);

if (ccr5 & 2) { /* possible wrong calibration done */
printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
@@ -2092,15 +2108,17 @@ static int __init id_and_try_enable_cpui
if (dir0 == 5 || dir0 == 3)
{
unsigned char ccr3, ccr4;
+ unsigned long flags;

printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+ save_flags(flags);
cli();
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
ccr4 = getCx86(CX86_CCR4);
setCx86(CX86_CCR4, ccr4 | 0x80); /* enable cpuid */
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
- sti();
+ restore_flags(flags);
}
} else
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/