Re: PCI hiccup installing Lucent/Orinoco carbus PCI adapter

Ferenc Kubinszky (Ferenc.Kubinszky@eth.ericsson.se)
Wed, 18 Jul 2001 09:18:16 +0200


> > [1.] One line summary of the problem:
> >
> > PCI Drivers fail to allocate interrrupt for Lucent Cardbus bridge
> >
> > [2.] Full description of the problem/report:
> >
> > The 2.4.3 kernel recognizes the card but failts to allocate an
> > interrupt for it. This is the Lucent Oinoco PCI Carbus bridge product
> > which is based on the TI1410 chip. In talking with Dave Hinds about
> > the problem, he looked at the enclose outbut and suggested that it
> > looks like a kernel/PCI problem.
>
> Is the card getting an interrupt from thew bios ? Check your bios screen
> after reboot. There should be a patch regarding this included in 2.4.6, would
> you try this and see if it works ?

Hello,

Just an idea:
Check the "exclude irq n" lines in your /etc/pcmcia/config.opts
Maybe it conflicts with some "PnP" interrupt like serial or paralell
port's...

Ferenc
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/