> > In article <firstname.lastname@example.org>,
> > Neil Brown <email@example.com> wrote:
> > | On Tuesday October 23, firstname.lastname@example.org wrote:
> > | Odd ... I use lines just like that. e.g.:
> > | append="md=0,/dev/hda1,/dev/hde1,/dev/hdg1"
> > |
> > | and it works just fine. What do you get in the way of error messages?
> > None - the system simply exits the BIOS, reads the first drive once and
> > cold boots. The drive is okay, I can read both copies of the mirror end
> > to end without error after booting from floppy. Lilo claims it writes to
> > the md0 device, but boot fails.
> I always let lilo write to the first and the second disk itself, and I
> do not use any kernel parameters for sw raid. Is writing to the disks
> instead of writing to /dev/md0 the wrong way? It works for me.
Tried that as well, with -b, still doesn't like to boot. It may well be
the system, which is seriously strange in config. I have some other
systems I'd love to install RAID, but the Redhat (mandated by management)
install won't do RAID unless graphical install. Unless that's fixed/added
in 7.2 which I haven't tried. These systems don't do graphical...
-- bill davidsen <email@example.com> CTO, TMR Associates, Inc Doing interesting things with little computers since 1979.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/