2.5.1-pre11 de2104X tulip driver problem

really mason@soo.com (mason@soo.com")
Thu, 13 Dec 2001 15:03:46 -0500


Just a tulip driver bug report:

i'm one of those dinosaurs using a 10base2 network and really
old DLink-530 21040 and 21041 based ethercards.

This is what a recent kernel version (2.5.1-pre10) working
tulip driver prints out when booting up:

kernel: tulip0: 21041 Media table, default media 0800 (Autosense).
kernel: tulip0: 21041 media #0, 10baseT.
kernel: tulip0: 21041 media #4, 10baseT-FDX.
kernel: tulip0: 21041 media #1, 10base2.
[...]
kernel: eth0: Digital DC21041 Tulip rev 17 at 0xe0800f80, 21041 mode, 00:80:C8:3E:D0:BC, IRQ 12.
[...]
kernel: eth0: No 21041 10baseT link beat, Media switched to AUI.

Card still works on my 10base2 network even tho i haven't got
an AUI port on the ethercard.
======================================================================

This is what the non working 2.5.1-pre11 tulip driver prints out:

kernel: de2104x PCI Ethernet driver v0.5.1 (Nov 20, 2001)
kernel: de0: SROM-listed ports: TP
kernel: eth0: 21041 at 0xe0800f80, 00:80:c8:3e:d0:bc, IRQ 12
[...]
kernel: eth0: set link 10baseT auto, mode 7ffc0040, sia 10c4,ffffef01,ffffffff,ffff0008
kernel: set mode 7ffc0000, set sia ef01,ffff,8

====================================================================

regards,
b <mason@soo.com>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/