Re: reiserfs does not work with linux 2.4.17 on sparc64 CPUs

[Luigi Genoni]

OK, here is my oops

reiserfs: checking transaction log (device 08:14) ...
Using r5 hash to sort names
Unsupported unaligned load/store trap for kernel at <000000000059bae8>.
              \|/ ____ \|/
              "@'/ .. \`@"
              /_| \__/ |_\
                 \__U_/
mount(38): Kernel does fpu/atomic unaligned load/store.
TSTATE: 0000004411009603 TPC: 000000000059bae8 TNPC: 000000000059baec Y: 00000000    Not tainted
g0: 000000000000ff00 g1: 0000000000000142 g2: 0000000000000001 g3: 0000000000000000
g4: fffff80000000000 g5: 0000000000000002 g6: fffff8006f27c000 g7: 0000000000000140
o0: 0000000000000000 o1: fffff8006f3241c4 o2: 0000000000000000 o3: 0000000000000073
o4: 0000000000000073 o5: 0000000000000000 sp: fffff8006f27f1b1 ret_pc: 00000000004ae6dc
l0: 0000000000000000 l1: fffff8006f1b8000 l2: fffff8006f1b8034 l3: 00000000005a9800
l4: 00000000019cc780 l5: 00000000005ca7a0 l6: fffff8006f1ba001 l7: 0000000000030000
i0: fffff8006f324000 i1: fffff8006f3241c4 i2: 0000000000000000 i3: 00000000004ae480
i4: 0814000000000000 i5: 0000000000000800 i6: fffff8006f27f2a1 i7: 00000000004694b4
Caller[00000000004694b4]
Caller[0000000000469c10]
Caller[000000000047d370]
Caller[000000000047d688]
Caller[000000000042da08]
Caller[0000000000410af4]
Caller[000000000001274c]
Instruction DUMP: 9089c005  12600006  8219c005 <c3f25007> 80a1c001
3267fffb  ce5a4000  81c3e008  8143e00a
sys32_ioctl(hwclock:47): Unknown cmd fd(3) cmd(00004b50) arg(effff900)
sys32_ioctl(hwclock:50): Unknown cmd fd(3) cmd(00004b50) arg(effff900)

and here are some more data about my system:

storm:{root}:~>cat /proc/cpuinfo
cpu             : TI UltraSparc II  (BlackBird)
fpu             : UltraSparc II integrated FPU
promlib         : Version 3 Revision 25
prom            : 3.25.0
type            : sun4u
ncpus probed    : 1
ncpus active    : 1
Cpu0Bogo        : 799.53
Cpu0ClkTck      : 0000000017d77c6e
MMU Type        : Spitfire

storm:{root}:/proc>cat scsi/esp/0
Sparc ESP Host Adapter:
        PROM node               f006bef4
        PROM name               SUNW,fas
        ESP Model               Happy Meal FAS
        DMA Revision            Rev HME/FAS
        Live Targets            [ 0 1 6 ]

Target #        config3         Sync Capabilities       Disconnect      Wide
0               000000c3        [05,04]                 yes             yes
1               000000c3        [05,04]                 yes             yes
6               00000081        [05,04]                 yes             no

storm:{root}:/proc>cat scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM      Model: DNES30917SUN9.0G Rev: SAD0
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 01 Lun: 00
  Vendor: IBM      Model: DNES30917SUN9.0G Rev: SAD0
  Type:   Direct-Access                    ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 06 Lun: 00
  Vendor: TOSHIBA  Model: XM5701TASUN12XCD Rev: 0997
  Type:   CD-ROM                           ANSI SCSI revision: 02

storm:{root}:~>cat /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  1040752640 627818496 412934144        0 132423680 388440064
Swap: 1077379072        0 1077379072
MemTotal:      1016360 kB
MemFree:        403256 kB
MemShared:           0 kB
Buffers:        129320 kB
Cached:         379336 kB
SwapCached:          0 kB
Active:         170272 kB
Inactive:       376720 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:      1016360 kB
LowFree:        403256 kB
SwapTotal:     1052128 kB
SwapFree:      1052128 kB

storm:{root}:/proc>cat interrupts
  0:     125738  timer:dead
  3:     391330  ESP SCSI:7e0
  5:       5209  Quattro:7d4, HAPPY MEAL:7e1
 12:       3899  Zilog8530:7e8
 13:          0  cs4231:7e4
 15:          0  SYSIO UE:7f4, SYSIO CE:7f5, SYSIO SBUS Error:7f6

storm:{root}:/proc>eeprom
tpe-link-test?=true
scsi-initiator-id=7
keyboard-click?=false
keymap: data not available.
sbus-probe-list=e0123
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
mfg-mode=off
diag-level=max
#power-cycles=29
system-board-serial#=5013132279188
system-board-date=38bcfa61
fcode-debug?=false
output-device=screen
input-device=keyboard
load-base=16384
boot-command=boot
auto-boot?=true
watchdog-reboot?=false
diag-file: data not available.
diag-device=net
boot-file: data not available.
boot-device=linux
local-mac-address?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
silent-mode?=false
use-nvramrc?=true
nvramrc=devalias linux /sbus/SUNW,fas/sd@0,0:c

security-mode=none
security-password: data not available.
security-#badlogins=0
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
hardware-revision: data not available.
last-hardware-update: data not available.
diag-switch?=false
name=options

2.4.16 does work very well.

Luigi

On Thu, 27 Dec 2001, Nikita Danilov wrote:

> Luigi Genoni writes:
>  > HI,
>  > I just upgraded to kernel 2.4.17 on a ultra2, sparc64, with 2 scsi disks.
>  >
>  > My system was on reiserfs,except for root partition, but the kernel 2.4.17
>  > is unable to mount reiserFS partitions.
>  > At boot i get an oops during the mount, but sincer I have no syslogd
>  > running I am not able to log it. Anyway the message talk about not been
>  > able to load a table map.
>
> Can you boot into single user, mount reiserfs partition manually and
> send decoded oops trace to the reiserfs list
> ([e-mail])?
>
>  >
>  > gone back (sig!) to 2.4.16
>  >
>  > on x86 processors, instead, reiserfs semms to work as usual
>  >
>  > Luigi
>  >
>
> Nikita.
> --
> Harry Popper---bespectacled philosopher
>