PROBLEM: "shutdown -r now" (lilo, win98) (fwd)

Riley Williams (rhw@MemAlpha.cx)
Tue, 8 Jan 2002 19:55:30 +0000 (GMT)


Hi Stepan.

Unfortunately, I'm not able to help with this. As a result, I've
forwarded it to the Linux Kernel Developers mailing list for
comment. Hopefully, somebody there can help...

Best wishes from Riley.

---------- Forwarded message ----------
Date: Tue, 8 Jan 2002 15:18:33 +0100
From: Stepan Maseizik <st.mase@web.de>
To: rhw@memalpha.cx
Subject: PROBLEM: "shutdown -r now" (lilo, win98)

1. PROBLEM: "shutdown -r now" problem (lilo,win98)

2. DESCRIPTION: When I try a "shutdown -r now" to start win98 (using lilo as
bootloader) the computer hangs a few seconds after the initial
win98 start-picture. Horizontal white lines run across the
screen, the win98 startlogo is still visible.
A "shutdown -r now" rebooting linux works just fine!
A "shutdown -h now", restrating the computer and selcting
win98 from the lilo-menu works fine as well!

I had a similar problem with suse-kernel 2.4.4. The only
difference: No runnig white lines across the screen. But I got
an error massage then that read "UNABLE TO CONTROL THE A20
LINE!" I have reported that problem to SuSE and they have
generated a bug report (so they said 11. jul 2001).

3. Kywords: rebooting win98, lilo?, A20 line error?

4. Kernel: Linux version 2.4.16-4GB (root@Pentium.suse.de) (gcc version
2.95.3 20010315 (SuSE)) #1 Tue Dec 18 15:10:30 GMT 2001

5. oops --
6. script --

7. Environment

7.1 Software: output from ver_linux:

-----------------------------------------------------------------------
Linux kurt 2.4.16-4GB #1 Tue Dec 18 15:10:30 GMT 2001 i686 unknown

Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.10.91.0.4
util-linux 2.11b
mount 2.11b
modutils 2.4.12
e2fsprogs 1.19
reiserfsprogs 3.x.0k-pre10
pcmcia-cs 3.1.28
PPP 2.4.0
isdn4k-utils 3.1pre1a
Linux C Library x 1 root root 1341670 Dez 18 16:50
/lib/libc.so.6
Dynamic linker (ldd) 2.2.2
Procps 2.0.7
Net-tools 1.60
Kbd 1.04
Sh-utils 2.0
Modules Loaded ppp_deflate bsd_comp ppp_async ppp_generic slhc
snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-seq-midi snd-seq-midi-event
snd-seq snd-card-ymfpci snd-ymfpci snd-pcm snd-ac97-codec snd-mixer snd-opl3
snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore
parport_pc lp parport mousedev hid input usb-uhci usbcore ipv6 ds i82365
pcmcia_core ipchains ide-scsi nls_iso8859-1 nls_cp437 reiserfs
--------------------------------------------------------------------------

7.2 Processor information (from /proc/cpuinfo):

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 3
cpu MHz : 159.355
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr sse
bogomips : 304.74

7.3 Module information (from /proc/modules):

ppp_deflate 39680 0 (autoclean)
bsd_comp 4032 0 (autoclean)
ppp_async 6144 0 (autoclean)
ppp_generic 14760 0 (autoclean) [ppp_deflate bsd_comp ppp_async]
slhc 4432 0 (autoclean) [ppp_generic]
snd-pcm-oss 18400 0 (autoclean)
snd-pcm-plugin 14480 0 (autoclean) [snd-pcm-oss]
snd-mixer-oss 4672 0 (autoclean) [snd-pcm-oss]
snd-seq-midi 3136 0 (unused)
snd-seq-midi-event 2800 0 [snd-seq-midi]
snd-seq 38320 0 [snd-seq-midi snd-seq-midi-event]
snd-card-ymfpci 4288 0
snd-ymfpci 35936 0 [snd-card-ymfpci]
snd-pcm 28960 0 [snd-pcm-oss snd-pcm-plugin snd-ymfpci]
snd-ac97-codec 23488 0 [snd-ymfpci]
snd-mixer 22568 0 [snd-mixer-oss snd-ymfpci snd-ac97-codec]
snd-opl3 4256 0 [snd-card-ymfpci]
snd-hwdep 3072 0 [snd-opl3]
snd-timer 8128 0 [snd-seq snd-pcm snd-opl3]
snd-mpu401-uart 2288 0 [snd-card-ymfpci]
snd-rawmidi 9184 0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device 3740 0 [snd-seq-midi snd-seq snd-rawmidi]
snd 31072 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss
snd-seq-midi snd-seq-midi-event sndsoundcore 3268 5 [snd]
parport_pc 25192 1 (autoclean)
lp 5824 0 (autoclean)
parport 22368 1 (autoclean) [parport_pc lp]
mousedev 3872 0 (unused)
hid 17760 0 (unused)
input 3072 0 [mousedev hid]
usb-uhci 20996 0 (unused)
usbcore 47616 1 [hid usb-uhci]
ipv6 124608 -1 (autoclean)
ds 6816 2
i82365 23312 2
pcmcia_core 43040 0 [ds i82365]
ipchains 29640 0
ide-scsi 7584 0
nls_iso8859-1 2880 1 (autoclean)
nls_cp437 4384 1 (autoclean)
reiserfs 152096 2

7.4 Loaded driver and hardware information

/proc/ioports:

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03e8-03ef : serial(auto)
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1040-105f : PCI device 8086:7113
8000-803f : PCI device 8086:7113
fc40-fc7f : PCI device 1073:0010
fc40-fc7f : YMF744 legacy
fcc0-fcdf : PCI device 8086:7112
fcc0-fcdf : usb-uhci
fce0-fce7 : PCI device 14f1:2443
fcec-fcef : PCI device 1073:0010
fcf0-fcff : PCI device 8086:7111
fcf0-fcf7 : ide0
fcf8-fcff : ide1

/proc/iomem:

00000000-0009f7ff : System RAM
0009f800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00242cd7 : Kernel code
00242cd8-002a27eb : Kernel data
0fff0000-0ffff7ff : ACPI Tables
0ffff800-0fffffff : ACPI Non-volatile Storage
10000000-10000fff : PCI device 1180:0478
10000000-10000fff : i82365
10001000-10001fff : PCI device 1180:0478
10001000-10001fff : i82365
40000000-40ffffff : PCI device 8086:7190
fd000000-fdffffff : PCI Bus #01
fd000000-fdffffff : PCI device 10c8:0025
fd000000-fd2effff : vesafb
fe800000-fecfffff : PCI Bus #01
fe800000-febfffff : PCI device 10c8:0025
fec00000-fecfffff : PCI device 10c8:0025
fede0000-fedeffff : PCI device 14f1:2443
fedf0000-fedf7fff : PCI device 1073:0010
fedff000-fedff7ff : PCI device 104d:8039
fedffc00-fedffdff : PCI device 104d:8039
fff80000-ffffffff : reserved

7.5 PCI information (lspci -vvv)

00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev
03)
Subsystem: Sony Corporation: Unknown device 806f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at 40000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 1.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fe800000-fecfffff
Prefetchable memory behind bridge: fd000000-fdffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at fcf0 [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if
00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at fcc0 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 03)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

00:08.0 FireWire (IEEE 1394): Sony Corporation CXD3222 i.LINK Controller (rev
02) (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 8071
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fedff000 (32-bit, non-prefetchable) [disabled] [size=2K]
Region 1: Memory at fedffc00 (32-bit, non-prefetchable) [disabled] [size=512]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 Multimedia audio controller: Yamaha Corporation YMF-744B [DS-1S Audio
Controller] (rev 02)
Subsystem: Sony Corporation: Unknown device 8072
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fedf0000 (32-bit, non-prefetchable) [size=32K]
Region 1: I/O ports at fc40 [size=64]
Region 2: I/O ports at fcec [size=4]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Communication controller: CONEXANT: Unknown device 2443 (rev 01)
Subsystem: Sony Corporation: Unknown device 8075
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fede0000 (32-bit, non-prefetchable) [disabled] [size=64K]
Region 1: I/O ports at fce0 [disabled] [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
Subsystem: Sony Corporation: Unknown device 8073
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 00000000-00000000
Memory window 1: 00000000-00000000
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

00:0c.1 CardBus bridge: Ricoh Co Ltd RL5c478 (rev 80)
Subsystem: Sony Corporation: Unknown device 8073
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 00000000-00000000
Memory window 1: 00000000-00000000
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001

01:00.0 VGA compatible controller: Neomagic Corporation: Unknown device 0025
(rev 30) (prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80a2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B+
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 128 (4000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at fec00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

7.6 SCSI information (from /proc/scsi/ide-scsi)

SCSI host adapter emulation for IDE ATAPI devices



8. The computer is a Sony PCG-F707 notebook.
This is my very first bug report. I hope I got the right maintainer and the
report contains all that is needed. Thanks for your work on the kernel!!

Regards,
Stephan Maseizik

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/