Re: Sharing Interrupt+HPT366 Problem on BP6

Anton Tinchev (atl@top.bg)
Sat, 19 Jan 2002 16:51:01 -0800


Without NIC hangs too...
I tried every combination that i can imagine and the result is:
Drives on only one channel - system works
Drives on both channels - system hangs

Ville Herva wrote:

> On Sat, Jan 19, 2002 at 09:11:09AM -0800, you [Anton Tinchev] claimed:
> >
> > The configuration is:
> > Abit BP6 MB
> > Single Celeron 366 processor
> > 1X10G hdd
> > 3X60G hdd
> > 256MB ram
> > Davicom 100MB/s NIC
> > S3 Trio3D AGP VGA
>
> Which slot did you put your nic (and other pci cards)? Don't put them in
> slot #3 (it shares the IRQ with HPT366). And even if slot 3 is empty, try
> switching the slow and see if it makes difference.
>
> Also, make sure you have the newest bios.
>
> I have BP6 here, three drives HPT366:
>
> hda: IBM-DCAA-34330, ATA DISK drive
> hdb: CD-532E-A, ATAPI CD/DVD-ROM drive
> hdd: CR-4804TE, ATAPI CD/DVD-ROM drive
> hde: IBM-DJNA-352030, ATA DISK drive
> hdf: IBM-DTTA-351680, ATA DISK drive
> hdg: SAMSUNG SV6004H, ATA DISK drive
> hdh: SAMSUNG SV6004H, ATA DISK drive
>
> No problems.
>
> -- v --
>
> v@iki.fi
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/