> On Fri, 15 Feb 2002, Nick Urbanik wrote:
>
> > Dear folks,
> >
> > I have tried cmd649 ATA pci cards; they work great with single CPU
> > kernels, not at all with SMP kernels. The SMP kernel just does not make
> > an entry in /proc/ide. Some details are in my post on 13 Feb, with
> > subject: cmd649 ok 1 cpu, 2 cpus, not working. I would appreciate any
> > pointers that may lead to getting them working.
> >
> > So if this is not a common problem, does _anyone_ use ATA cards with SMP
> > boxes? If so, which ones work? HPT?
>
> LOL, I had the same question asked to me by CMD and probed to them it
> works. Obviously you have not configured something correct :-/
Thanks for your reply, Andre.
Okay, this has happened repeatably on two Acer Altos boxes. Sorry to be so
silly, but I can't think what else I can configure.
The jumper on the disk is set to master, it is plugged into the primary using
an ATA100 cable, the power is on :-)
On the other dual CPU box (using older kernels), I could boot into a single
CPU kernel on the machine, and the disks would work. Boot into a SMP kernel,
no recognition of the bus in /proc/ide, and fdisk reports the other disks,
but not those plugged into the cmd card. The cmd64x driver is compiled
directly into the kernel, not loaded as a module.
Any other suggestions? Where can I find more evidence? Willing to try
anything!
-- Nick Urbanik RHCE nicku@vtc.edu.hk Dept. of Information & Communications Technology Hong Kong Institute of Vocational Education (Tsing Yi) Tel: (852) 2436 8576, (852) 2436 8579 Fax: (852) 2436 8526 PGP: 53 B6 6D 73 52 EE 1F EE EC F8 21 98 45 1C 23 7B ID: 7529555D GPG: 7FFA CDC7 5A77 0558 DC7A 790A 16DF EC5B BB9D 2C24 ID: BB9D2C24
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/