On Fri Feb 22, 2002 at 14:11:01 +0100, Stephan von Krawczynski wrote:
> > > I compile my kernel (2.4.18-rc2) with the attached config. Please try
> > > it and tell your results. I can assure you that this machine runs rock
> > > solid over here for months.
> >
> > No luck here. Hangs during boot (tried with 2.4.18-rc2-ac2).
>
> Please start from a setup as close to mine as possible. That is 2.4.18-rc2.
> In setup switch MPS 1.4 support to disable and Power Management to disable.
No luck, even with completely switched off PM. "noapic" works. I
attached the stripped down config. It mostly hangs while setting up the
second CPU.
> > I even updated the BIOS from 1010 to 1014 as well (just in case). What
> > BIOS version are you running? And at how many MHz are the CPUs?
>
> I use BIOS 1010, 2 x P3 1 GHz and tried RAM from 512MB to 2GB.
> Currently installed are 2GB being 2 x 1GB registered DIMM.
2x 933, RAM is 960MB.
Adam
-- Adam adam@os.inf.tu-dresden.de Lackorzynski http://a.home.dhs.org--D6z0c4W1rkZNF4Vu Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: attachment; filename="config.y-only"
CONFIG_X86=y CONFIG_ISA=y CONFIG_UID16=y CONFIG_EXPERIMENTAL=y CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y CONFIG_MPENTIUMIII=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_NOHIGHMEM=y CONFIG_MTRR=y CONFIG_SMP=y CONFIG_HAVE_DEC_LOCK=y CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y CONFIG_SYSVIPC=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_INITRD=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SCSI_DEBUG_QUEUES=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_G_NCR5380_PORT=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_TULIP=y CONFIG_NET_RADIO=y CONFIG_AIRONET4500_PNP=y CONFIG_AIRONET4500_PCI=y CONFIG_AIRONET4500_ISA=y CONFIG_AIRONET4500_I365=y CONFIG_NET_WIRELESS=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_MOUSE=y CONFIG_PSMOUSE=y CONFIG_QUOTA=y CONFIG_TMPFS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_PROC_FS=y CONFIG_DEVFS_FS=y CONFIG_DEVPTS_FS=y CONFIG_EXT2_FS=y CONFIG_NFS_V3=y CONFIG_NFSD_V3=y CONFIG_LOCKD_V4=y CONFIG_PARTITION_ADVANCED=y CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y CONFIG_VGA_CONSOLE=y
--D6z0c4W1rkZNF4Vu-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/