Re: Boot problem with PDC20269

[Adam Huffman]

On Sat, 23 Feb 2002, Roy Sigurd Karlsbakk wrote:

> > > er .. I'm running a PDC20269 with a few drives. Is that supposed to be
> > > impossible?
> > >
> > > roy
> > >
> >
> > May I ask which kernel you are running?
> 
> linux-2.4.18pre3 + tux + linuxdiskcert.org's ide_2.4.17 patch
> --
> Roy Sigurd Karlsbakk, Datavaktmester
> 

I've managed to boot successfully now with 2.4.18-rc2-ac2.

I get the following messages when I mount the IBM 60GXP:

hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
PDC202XX: Primary channel reset.
ide2: reset: success

but mounting does proceed.  No such problem with the Maxtor.

Adam