On Tue, Feb 26, 2002 at 05:46:57PM -0800, jt wrote:
> Hi,
>
> I depend on hp100, so I had to fix it and replace all those
> virt_to_bus(). Only tested on a J2585B (PCI Busmaster). Other PCI and
> ISA cards are *not* busmaster, so should not be affected. Some EISA
> cards may be busmaster, but we would need to track down a tester...
> If the official maintainer doesn't have anything to
> add, it would be nice if it could find its way in the kernel...
> Have fun...
>
> Jean
As Jeff mention, probably better if I attach a patch !
Jean
P.S. : Also : I've fixed basic IrDA in my tree...
--EVF5PPMfhYS0aIcm
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="hp100.vb.diff"
diff -u -p linux/drivers/net/hp100_vb.c linux/drivers/net/hp100.c
--- linux/drivers/net/hp100_vb.c Tue Feb 26 16:24:51 2002
+++ linux/drivers/net/hp100.c Tue Feb 26 17:27:10 2002
@@ -83,8 +83,6 @@
**
*/
-#error Please convert me to Documentation/DMA-mapping.txt
-
#define HP100_DEFAULT_PRIORITY_TX 0
#undef HP100_DEBUG
@@ -214,6 +212,7 @@ struct hp100_private {
u_int *page_vaddr; /* Virtual address of allocated page */
u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
+ dma_addr_t page_baddr; /* Bus/Physical address of allocated page */
int rxrcommit; /* # Rx PDLs commited to adapter */
int txrcommit; /* # Tx PDLs commited to adapter */
};
@@ -627,9 +626,20 @@ static int __init hp100_probe1(struct ne
local_mode = 3;
} else if (chip == HP100_CHIPID_LASSEN &&
(lsw & (HP100_BM_WRITE | HP100_BM_READ)) == (HP100_BM_WRITE | HP100_BM_READ)) {
+ /* Conversion to new PCI API :
+ * I don't have the doc, but I assume that the card
+ * can map the full 32bit address space.
+ * Also, we can have EISA Busmaster cards (not tested),
+ * so beware !!! - Jean II */
+ if((bus == HP100_BUS_PCI) &&
+ (pci_set_dma_mask(pci_dev, 0xffffffff))) {
+ /* Gracefully fallback to shared memory */
+ goto busmasterfail;
+ }
printk("hp100: %s: Busmaster mode enabled.\n", dev->name);
hp100_outw(HP100_MEM_EN | HP100_IO_EN | HP100_RESET_LB, OPTION_LSW);
} else {
+ busmasterfail:
#ifdef HP100_DEBUG
printk("hp100: %s: Card not configured for BM or BM not supported with this card.\n", dev->name);
printk("hp100: %s: Trying shared memory mode.\n", dev->name);
@@ -773,10 +783,12 @@ static int __init hp100_probe1(struct ne
* implemented/tested only with the lassen chip anyway... */
if (lp->mode == 1) { /* busmaster */
/* Get physically continous memory for TX & RX PDLs */
- if ((lp->page_vaddr = kmalloc(MAX_RINGSIZE + 0x0f, GFP_KERNEL)) == NULL)
+ /* Conversion to new PCI API :
+ * Pages are always aligned and zeroed, no need to it ourself.
+ * Doc says should be OK for EISA bus as well - Jean II */
+ if ((lp->page_vaddr = pci_alloc_consistent(lp->pci_dev, MAX_RINGSIZE, &lp->page_baddr)) == NULL)
return -ENOMEM;
- lp->page_vaddr_algn = ((u_int *) (((u_int) (lp->page_vaddr) + 0x0f) & ~0x0f));
- memset(lp->page_vaddr, 0, MAX_RINGSIZE + 0x0f);
+ lp->page_vaddr_algn = lp->page_vaddr;
#ifdef HP100_DEBUG_BM
printk("hp100: %s: Reserved DMA memory from 0x%x to 0x%x\n", dev->name, (u_int) lp->page_vaddr_algn, (u_int) lp->page_vaddr_algn + MAX_RINGSIZE);
@@ -1189,7 +1201,7 @@ static void hp100_init_pdls(struct net_d
{
struct hp100_private *lp = (struct hp100_private *) dev->priv;
hp100_ring_t *ringptr;
- u_int *pageptr;
+ u_int *pageptr; /* Warning : increment by 4 - Jean II */
int i;
#ifdef HP100_DEBUG_B
@@ -1245,8 +1257,12 @@ static int hp100_init_rxpdl(struct net_d
printk("hp100: %s: Init rxpdl: Unaligned pdlptr 0x%x.\n",
dev->name, (unsigned) pdlptr);
+ /* Conversion to new PCI API :
+ * The memory block we use, lp->page_vaddr, was DMA allocated via
+ * pci_alloc_consistent(), so we just need to "retreive" the
+ * original mapping to bus/phys address - Jean II */
ringptr->pdl = pdlptr + 1;
- ringptr->pdl_paddr = virt_to_bus(pdlptr + 1);
+ ringptr->pdl_paddr = virt_to_phys(pdlptr + 1);
ringptr->skb = (void *) NULL;
/*
@@ -1257,7 +1273,7 @@ static int hp100_init_rxpdl(struct net_d
*/
/* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
- *(pdlptr + 2) = (u_int) virt_to_bus(pdlptr); /* Address Frag 1 */
+ *(pdlptr + 2) = (u_int) virt_to_phys(pdlptr); /* Address Frag 1 */
*(pdlptr + 3) = 4; /* Length Frag 1 */
return ((((MAX_RX_FRAG * 2 + 2) + 3) / 4) * 4);
@@ -1271,8 +1287,12 @@ static int hp100_init_txpdl(struct net_d
if (0 != (((unsigned) pdlptr) & 0xf))
printk("hp100: %s: Init txpdl: Unaligned pdlptr 0x%x.\n", dev->name, (unsigned) pdlptr);
+ /* Conversion to new PCI API :
+ * The memory block we use, lp->page_vaddr, was DMA allocated via
+ * pci_alloc_consistent(), so we just need to "retreive" the
+ * original mapping to bus/phys address - Jean II */
ringptr->pdl = pdlptr; /* +1; */
- ringptr->pdl_paddr = virt_to_bus(pdlptr); /* +1 */
+ ringptr->pdl_paddr = virt_to_phys(pdlptr); /* +1 */
ringptr->skb = (void *) NULL;
return ((((MAX_TX_FRAG * 2 + 2) + 3) / 4) * 4);
@@ -1331,8 +1351,10 @@ static int hp100_build_rx_pdl(hp100_ring
(unsigned int) ringptr->skb->data);
#endif
+ /* Conversion to new PCI API : map skbuf data to PCI bus.
+ * Doc says it's OK for EISA as well - Jean II */
ringptr->pdl[0] = 0x00020000; /* Write PDH */
- ringptr->pdl[3] = ((u_int) virt_to_bus(ringptr->skb->data));
+ ringptr->pdl[3] = ((u_int) pci_map_single(((struct hp100_private *) (dev->priv))->pci_dev, ringptr->skb->data, MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE));
ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
#ifdef HP100_DEBUG_BM
@@ -1585,7 +1607,6 @@ static int hp100_start_xmit_bm(struct sk
ringptr->skb = skb;
ringptr->pdl[0] = ((1 << 16) | i); /* PDH: 1 Fragment & length */
- ringptr->pdl[1] = (u32) virt_to_bus(skb->data); /* 1st Frag: Adr. of data */
if (lp->chip == HP100_CHIPID_SHASTA) {
/* TODO:Could someone who has the EISA card please check if this works? */
ringptr->pdl[2] = i;
@@ -1593,6 +1614,9 @@ static int hp100_start_xmit_bm(struct sk
/* In the PDL, don't use the padded size but the real packet size: */
ringptr->pdl[2] = skb->len; /* 1st Frag: Length of frag */
}
+ /* Conversion to new PCI API : map skbuf data to PCI bus.
+ * Doc says it's OK for EISA as well - Jean II */
+ ringptr->pdl[1] = ((u32) pci_map_single(lp->pci_dev, skb->data, ringptr->pdl[2], PCI_DMA_TODEVICE)); /* 1st Frag: Adr. of data */
/* Hand this PDL to the card. */
hp100_outl(ringptr->pdl_paddr, TX_PDA_L); /* Low Prio. Queue */
@@ -1641,6 +1665,8 @@ static void hp100_clean_txring(struct ne
dev->name, (u_int) lp->txrhead->skb->data,
lp->txrcommit, hp100_inb(TX_PDL), donecount);
#endif
+ /* Conversion to new PCI API : NOP */
+ pci_unmap_single(lp->pci_dev, (dma_addr_t) lp->txrhead->pdl[1], lp->txrhead->pdl[2], PCI_DMA_TODEVICE);
dev_kfree_skb_any(lp->txrhead->skb);
lp->txrhead->skb = (void *) NULL;
lp->txrhead = lp->txrhead->next;
@@ -1950,6 +1976,9 @@ static void hp100_rx_bm(struct net_devic
header = *(ptr->pdl - 1);
pkt_len = (header & HP100_PKT_LEN_MASK);
+ /* Conversion to new PCI API : NOP */
+ pci_unmap_single(lp->pci_dev, (dma_addr_t) ptr->pdl[3], MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
+
#ifdef HP100_DEBUG_BM
printk("hp100: %s: rx_bm: header@0x%x=0x%x length=%d, errors=0x%x, dest=0x%x\n",
dev->name, (u_int) (ptr->pdl - 1), (u_int) header,
@@ -2910,7 +2939,7 @@ static void release_dev(int i)
release_region(d->base_addr, HP100_REGION_SIZE);
if (p->mode == 1) /* busmaster */
- kfree(p->page_vaddr);
+ pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f, p->page_vaddr, p->page_baddr);
if (p->mem_ptr_virt)
iounmap(p->mem_ptr_virt);
kfree(d->priv);
--EVF5PPMfhYS0aIcm--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/