Here is a top output. We have 16Gb of ram.
I have also tried a 2.4.9-31 enterprise
kernel rpm from RedHat with the same
results.
1:57pm up 20 min, 2 users, load average: 1.01, 0.88, 0.47
71 processes: 69 sleeping, 2 running, 0 zombie, 0 stopped
CPU0 states: 0.0% user, 0.0% system, 0.0% nice, 100.0% idle
CPU1 states: 0.1% user, 1.1% system, 0.0% nice, 98.2% idle
CPU2 states: 0.4% user, 99.1% system, 0.0% nice, 0.0% idle
CPU3 states: 0.0% user, 0.1% system, 0.0% nice, 99.4% idle
Mem: 15904836K av, 788196K used, 15116640K free, 400K shrd,
14848K buff
Swap: 16096164K av, 0K used, 16096164K free
574956K cached
PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND
1410 helmsjw 15 0 105M 105M 1072 R 99.9 0.6 7:37 WRITEFILE
1411 root 11 0 992 992 780 R 1.7 0.0 0:09 top
1 root 8 0 520 520 452 S 0.0 0.0 0:04 init
2 root 8 0 0 0 0 SW 0.0 0.0 0:00 keventd
3 root 19 19 0 0 0 SWN 0.0 0.0 0:00
ksoftirqd_CPU0
4 root 19 19 0 0 0 SWN 0.0 0.0 0:00
ksoftirqd_CPU1
5 root 19 19 0 0 0 SWN 0.0 0.0 0:00
ksoftirqd_CPU2
Below is the readprofile output per a recommendation
of Martin Bligh, who I have cc'd:
[root@rrux02 sbin]# ./readprofile
4 _stext 0.0625
464584 cpu_idle 4148.0714
1 machine_real_restart 0.0052
2 __switch_to 0.0078
13 restore_all 0.5652
1 v86_signal_return 0.0625
1 error_code 0.0156
1 device_not_available_emulate 0.0625
1 show_trace 0.0057
6 disable_irq 0.0469
1 sys_modify_ldt 0.0104
6 do_cyrix_devid 0.0417
2 do_read 0.0042
3 do_poll 0.0312
39 do_ioctl 0.0938
2 do_release 0.0083
1 __wake_up_sync 0.0039
67 sys_sched_rr_get_interval 0.2792
8 show_task 0.0200
1 add_wait_queue 0.0208
21 copy_files 0.0298
24 do_fork 0.0133
4 printk 0.0119
4 register_console 0.0100
1 inter_module_unregister 0.0057
2 sys_init_module 0.0013
2 sys_delete_module 0.0033
1 sys_query_module 0.0026
2 sys_setitimer 0.0089
1 sys_sysinfo 0.0033
1 find_resource 0.0052
1 do_sysctl 0.0063
3 do_proc_dointvec 0.0036
15 sysctl_string 0.0493
2 sysctl_jiffies 0.0083
16 check_free_space 0.0357
2 sys_acct 0.0043
1 do_sigpending 0.0069
1 sys_rt_sigtimedwait 0.0013
1 sys_setgid 0.0057
1 in_group_p 0.0208
1 sys_newuname 0.0078
2 __pmd_alloc 0.0625
2 pte_alloc 0.0063
6 unlock_vma_mappings 0.1250
8 sys_brk 0.0357
54729 do_mmap_pgoff 51.8267
4 get_unmapped_area 0.0132
1 exit_mmap 0.0035
1 __insert_vm_struct 0.0026
3 insert_vm_struct 0.0375
41 merge_anon_vmas 0.1971
4 attempt_merge_next 0.0312
1 add_page_to_hash_queue 0.0208
43 truncate_inode_pages 0.2240
2 __find_page_simple 0.0250
11 writeout_one_page 0.1375
11 waitfor_one_page 0.1375
12 do_buffer_fdatasync 0.0577
23 generic_buffer_fdatasync 0.1307
1 filemap_fdatasync 0.0035
2 filemap_fdatawait 0.0125
2 add_to_page_cache_locked 0.0104
7 add_to_page_cache 0.0337
2 add_to_page_cache_unique 0.0083
1 read_cluster_nonblocking 0.0030
3 ___wait_on_page 0.0156
9 __lock_page 0.0469
1 lock_page 0.0208
1 __find_get_page 0.0057
1 __find_get_swapcache_page 0.0045
9 __find_lock_page 0.0268
1 drop_behind 0.0045
33 generic_file_readahead 0.0469
32 do_generic_file_read 0.0215
1 file_read_actor 0.0045
7 file_send_actor 0.0273
11 sys_sendfile 0.0215
2 nopage_sequential_readahead 0.0066
7 madvise_willneed 0.0109
1 madvise_vma 0.0104
1 sys_madvise 0.0039
34 mincore_page 0.1635
12 change_protection 0.0259
1 mprotect_fixup 0.0012
4 mlock_fixup 0.0049
2 do_mlock 0.0089
5 move_page_tables 0.0312
1 refill_inactive_scan 0.0033
1 do_try_to_free_pages 0.0104
14 kswapd 0.0515
5 wakeup_kswapd 0.1042
3 try_to_free_pages 0.0469
6 kreclaimd 0.0341
18 rw_swap_page_base 0.0450
1 nr_free_highpages 0.0208
3 zone_inactive_shortage 0.0469
2 show_free_areas_core 0.0069
90 badness 0.4688
2 select_bad_process 0.0208
30 shmem_recalc_inode 0.3125
15 shmem_swp_entry 0.0938
64 shmem_truncate 0.1176
8 shmem_unuse_inode 0.0312
2 shmem_writepage 0.0074
28 shmem_getpage_locked 0.0292
1 shmem_getpage 0.0045
2 shmem_file_write 0.0022
1 shmem_file_setup 0.0033
2 alloc_bounce_page 0.0096
1240 vfs_statfs 9.6875
1 file_move 0.0156
5 file_moveto 0.0781
1 fs_may_remount_ro 0.0089
1 end_buffer_io_sync 0.0125
4 write_unlocked_buffers 0.0139
1 wait_for_locked_buffers 0.0057
21 sync_buffers 0.3281
1 fsync_super 0.0057
1 fsync_dev 0.0089
3 __block_write_full_page 0.0054
6 brw_kiovec 0.0083
11 brw_page 0.0573
1 detach_mnt 0.0125
2 attach_mnt 0.0139
3 move_vfsmnt 0.0187
2 __mntput 0.0208
2 mangle 0.0125
2 get_filesystem_info 0.0019
1 sys_ustat 0.0045
1 get_unnamed_dev 0.0208
1 do_umount 0.0027
1 mount_is_safe 0.0208
2 block_llseek 0.0125
1 get_write_access 0.0156
1 deny_write_access 0.0125
2 lookup_hash 0.0104
3 open_namei 0.0019
1 sys_unlink 0.0039
1 vfs_follow_link 0.0026
3 page_follow_link 0.0065
3 sys_dup2 0.0134
5 do_fcntl 0.0073
1 send_sigio_to_task 0.0052
1 sys_ioctl 0.0020
2 vfs_readdir 0.0096
1 fillonedir 0.0057
1 filldir64 0.0031
1 do_select 0.0017
1 fcntl_setlease 0.0016
1 dput 0.0028
1 d_invalidate 0.0069
1 dget_locked 0.0208
1 d_prune_aliases 0.0063
1 prune_dcache 0.0026
1 have_submounts 0.0078
2 d_delete 0.0114
1 __inode_dir_notify 0.0057
1 read_blk 0.0104
4 find_free_dqentry 0.0078
4 do_insert_tree 0.0086
3 read_dquot 0.0085
1 set_dqblk 0.0018
1 set_info 0.0037
2 dquot_initialize 0.0043
1 load_elf_interp 0.0014
1 remove_proc_entry 0.0037
1 minix_partition 0.0037
182 ext2_free_blocks 0.1835
2 ext2_new_block 0.0007
1 ext2_dotdot 0.0208
2 random_read 0.0060
4 vt_ioctl 0.0005
2 vcs_write 0.0017
1 receive_chars 0.0023
3 set_fdc 0.0170
1 _lock_fdc 0.0030
1 show_floppy 0.0017
2 start_motor 0.0078
1 wait_til_done 0.0031
2 format_interrupt 0.0312
1 setup_format_params 0.0022
5 rw_interrupt 0.0063
1 ide_spin_wait_hwgroup 0.0078
1 set_pio_mode 0.0104
3 ide_add_generic_settings 0.0059
1 ahc_linux_alloc_device 0.0089
2 ahc_linux_filter_command 0.0027
2 ahc_linux_queue_recovery_cmd 0.0007
1 ahc_aha394XX_setup 0.0125
1 revalidate_scsidisk 0.0024
6 pci_find_capability 0.0312
1 pci_find_parent_resource 0.0078
12 pci_set_power_state 0.0417
3 pci_save_state 0.0375
1 pci_restore_state 0.0078
3 pci_compare_state 0.0375
1 pci_generic_resume_restore 0.0312
1 pci_generic_resume_compare 0.0312
2 pci_enable_device 0.0417
1 pci_disable_device 0.0156
4 pci_scan_slot 0.0192
1 pci_pm_suspend_device 0.0208
1 pci_pm_resume_device 0.0312
1 pci_pm_save_state_bus 0.0104
1 pci_pm_suspend_bus 0.0104
15 isapnp_alternative_switch 0.0154
1 isapnp_valid_port 0.0031
1 isapnp_check_interrupt 0.0039
2 isapnp_valid_irq 0.0040
1 isapnp_print_configuration 0.0015
1 isapnp_set_port 0.0035
12 fbcon_clear 0.0300
4 fbcon_putc 0.0192
5 fbcon_cfb24_putcs 0.0054
3 write_disk_sb 0.0067
3 sync_sbs 0.0208
1 set_disk_info 0.0312
9 get_geo 0.0703
1 md_ioctl 0.0004
3 md_thread 0.0069
1 md_wakeup_thread 0.0312
5 md_register_thread 0.0312
2 md_error 0.0125
1 status_unused 0.0063
4 status_resync 0.0068
10 md_status_read_proc 0.0145
2 sys_sendmsg 0.0042
1 dst_alloc 0.0069
1 ip_queue_xmit 0.0008
1 ip_build_xmit_slow 0.0008
2 ip_build_xmit 0.0022
2 ip_fragment 0.0023
2 ip_icmp_error 0.0060
1 tcp_fastretrans_alert 0.0008
1 __tcp_select_window 0.0042
230 rtmsg_ifa 1.4375
31 inet_forward_change 0.2422
669 devinet_sysctl_forward 6.9688
3 devinet_sysctl_register 0.0104
4 devinet_sysctl_unregister 0.0833
4 inet_sock_destruct 0.0104
3 inet_sock_release 0.0170
4 inet_create 0.0066
10 inet_bind 0.0152
1 inet_wait_for_connect 0.0022
2 inet_stream_connect 0.0032
374 fib_netdev_event 2.9219
523311 total 0.4193
>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<
On 3/15/02, 2:05:39 PM, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote regarding
Re: bug (trouble?) report on high mem support:
> > running under the 2.4.7-10 enterprise
> > kernel. This same program runs fine
> > under the 2.4.7-10 smp kernel. The main
> Firstly queue standard comment about 2.4.9 errata kernels and upgrading
> > difference is that in a top output, most
> > of the cpu time is in system mode and very
> > little user mode under the enterprise kernel,
> > and just the opposite under the smp kernel.
> When you are using large amounts of RAM things in the PC world get a bit
> messy. Is this a box with a lot of memory ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/