The patch below updates drivers/ide/ide-pmac.c (the powermac IDE
driver) to use the PCI DMA API and to correspond with the recent
changes to the ide driver. It also arranges for report_drive_dmaing
to be exported from ide-dma.c so ide-pmac.c can use it, and fixes a
minor problem in ide-probe.c where an instance of "ide_floppy" got
missed in the change to ATA_FLOPPY.
Assuming the patch looks OK to you, could you forward it to Linus for
him to apply to his linux-2.5 tree, please? If you prefer I can make
this available in a bitkeeper tree for you to pull from.
Thanks,
Paul.
diff -urN linux-2.5/drivers/ide/ide-dma.c linuxppc-2.5/drivers/ide/ide-dma.c
--- linux-2.5/drivers/ide/ide-dma.c Wed Mar 27 13:47:13 2002
+++ linuxppc-2.5/drivers/ide/ide-dma.c Thu Apr 4 14:48:21 2002
@@ -421,7 +421,7 @@
return 0;
}
-static int report_drive_dmaing (ide_drive_t *drive)
+int report_drive_dmaing (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
diff -urN linux-2.5/drivers/ide/ide-probe.c linuxppc-2.5/drivers/ide/ide-probe.c
--- linux-2.5/drivers/ide/ide-probe.c Fri Mar 22 13:04:10 2002
+++ linuxppc-2.5/drivers/ide/ide-probe.c Thu Apr 4 14:48:21 2002
@@ -140,7 +140,7 @@
/* kludge for Apple PowerBook internal zip */
if (!strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) {
printk ("FLOPPY");
- type = ide_floppy;
+ type = ATA_FLOPPY;
break;
}
#endif
diff -urN linux-2.5/drivers/ide/ide-pmac.c linuxppc-2.5/drivers/ide/ide-pmac.c
--- linux-2.5/drivers/ide/ide-pmac.c Wed Mar 27 13:47:13 2002
+++ linuxppc-2.5/drivers/ide/ide-pmac.c Mon Apr 8 16:29:07 2002
@@ -15,6 +15,16 @@
* Some code taken from drivers/ide/ide-dma.c:
*
* Copyright (c) 1995-1998 Mark Lord
+ *
+ * TODO:
+ *
+ * - Find a way to duplicate less code with ide-dma and use the
+ * dma fileds in the hwif structure instead of our own
+ * - Fix check_disk_change() call
+ * - Make module-able (includes setting ppc_md. hooks from within
+ * this file and not from arch code, and handling module deps with
+ * mediabay (by having both modules do dynamic lookup of each other
+ * symbols or by storing hooks at arch level).
*
*/
#include <linux/config.h>
@@ -24,26 +34,30 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/ide.h>
+#include <linux/pci.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/ide.h>
#include <asm/mediabay.h>
-#include <asm/feature.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/sections.h>
+#include <asm/irq.h>
#ifdef CONFIG_PMAC_PBOOK
#include <linux/adb.h>
#include <linux/pmu.h>
-#include <asm/irq.h>
#endif
#include "ata-timing.h"
extern char *ide_dmafunc_verbose(ide_dma_action_t dmafunc);
+extern spinlock_t ide_lock;
#undef IDE_PMAC_DEBUG
-#define IDE_SYSCLK_NS 30
-#define IDE_SYSCLK_ULTRA_PS 0x1d4c /* (15 * 1000 / 2)*/
+#define DMA_WAIT_TIMEOUT 500
struct pmac_ide_hwif {
ide_ioreg_t regbase;
@@ -53,11 +67,20 @@
struct device_node* node;
u32 timings[2];
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+ /* Those fields are duplicating what is in hwif. We currently
+ * can't use the hwif ones because of some assumptions that are
+ * beeing done by the generic code about the kind of dma controller
+ * and format of the dma table. This will have to be fixed though.
+ */
volatile struct dbdma_regs* dma_regs;
- struct dbdma_cmd* dma_table;
-#endif
+ struct dbdma_cmd* dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct scatterlist* sg_table;
+ int sg_nents;
+ int sg_dma_direction;
+#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-} pmac_ide[MAX_HWIFS];
+} pmac_ide[MAX_HWIFS] __pmacdata;
static int pmac_ide_count;
@@ -65,36 +88,160 @@
controller_ohare, /* OHare based */
controller_heathrow, /* Heathrow/Paddington */
controller_kl_ata3, /* KeyLargo ATA-3 */
- controller_kl_ata4 /* KeyLargo ATA-4 */
+ controller_kl_ata4, /* KeyLargo ATA-4 */
+ controller_kl_ata4_80 /* KeyLargo ATA-4 with 80 conductor cable */
};
+/*
+ * Extra registers, both 32-bit little-endian
+ */
+#define IDE_TIMING_CONFIG 0x200
+#define IDE_INTERRUPT 0x300
+
+/*
+ * Timing configuration register definitions
+ */
+
+/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
+#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
+#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
+#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
+#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
+
+/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
+ * 40 connector cable and to 4 on 80 connector one.
+ * Clock unit is 15ns (66Mhz)
+ *
+ * 3 Values can be programmed:
+ * - Write data setup, which appears to match the cycle time. They
+ * also call it DIOW setup.
+ * - Ready to pause time (from spec)
+ * - Address setup. That one is weird. I don't see where exactly
+ * it fits in UDMA cycles, I got it's name from an obscure piece
+ * of commented out code in Darwin. They leave it to 0, we do as
+ * well, despite a comment that would lead to think it has a
+ * min value of 45ns.
+ * Apple also add 60ns to the write data setup (or cycle time ?) on
+ * reads. I can't explain that, I tried it and it broke everything
+ * here.
+ */
+#define TR_66_UDMA_MASK 0xfff00000
+#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
+#define TR_66_UDMA_ADDRSETUP_MASK 0xe0000000 /* Address setup */
+#define TR_66_UDMA_ADDRSETUP_SHIFT 29
+#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
+#define TR_66_UDMA_RDY2PAUS_SHIFT 25
+#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
+#define TR_66_UDMA_WRDATASETUP_SHIFT 21
+#define TR_66_MDMA_MASK 0x000ffc00
+#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
+#define TR_66_MDMA_RECOVERY_SHIFT 15
+#define TR_66_MDMA_ACCESS_MASK 0x00007c00
+#define TR_66_MDMA_ACCESS_SHIFT 10
+#define TR_66_PIO_MASK 0x000003ff
+#define TR_66_PIO_RECOVERY_MASK 0x000003e0
+#define TR_66_PIO_RECOVERY_SHIFT 5
+#define TR_66_PIO_ACCESS_MASK 0x0000001f
+#define TR_66_PIO_ACCESS_SHIFT 0
+
+/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
+ * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
+ *
+ * The access time and recovery time can be programmed. Some older
+ * Darwin code base limit OHare to 150ns cycle time. I decided to do
+ * the same here fore safety against broken old hardware ;)
+ * The HalfTick bit, when set, adds half a clock (15ns) to the access
+ * time and removes one from recovery. It's not supported on KeyLargo
+ * implementation afaik. The E bit appears to be set for PIO mode 0 and
+ * is used to reach long timings used in this mode.
+ */
+#define TR_33_MDMA_MASK 0x003ff800
+#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
+#define TR_33_MDMA_RECOVERY_SHIFT 16
+#define TR_33_MDMA_ACCESS_MASK 0x0000f800
+#define TR_33_MDMA_ACCESS_SHIFT 11
+#define TR_33_MDMA_HALFTICK 0x00200000
+#define TR_33_PIO_MASK 0x000007ff
+#define TR_33_PIO_E 0x00000400
+#define TR_33_PIO_RECOVERY_MASK 0x000003e0
+#define TR_33_PIO_RECOVERY_SHIFT 5
+#define TR_33_PIO_ACCESS_MASK 0x0000001f
+#define TR_33_PIO_ACCESS_SHIFT 0
+
+/*
+ * Interrupt register definitions
+ */
+#define IDE_INTR_DMA 0x80000000
+#define IDE_INTR_DEVICE 0x40000000
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
# define BAD_DMA_DRIVE 0
# define GOOD_DMA_DRIVE 1
-typedef struct {
+/* Rounded Multiword DMA timings
+ *
+ * I gave up finding a generic formula for all controller
+ * types and instead, built tables based on timing values
+ * used by Apple in Darwin's implementation.
+ */
+struct mdma_timings_t {
int accessTime;
+ int recoveryTime;
int cycleTime;
-} pmac_ide_timing;
+};
-/* Multiword DMA timings */
-static pmac_ide_timing mdma_timings[] =
+struct mdma_timings_t mdma_timings_33[] __pmacdata =
{
- { 215, 480 }, /* Mode 0 */
- { 80, 150 }, /* 1 */
- { 70, 120 } /* 2 */
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 135, 135, 270 },
+ { 120, 120, 240 },
+ { 105, 105, 210 },
+ { 90, 90, 180 },
+ { 75, 75, 150 },
+ { 75, 45, 120 },
+ { 0, 0, 0 }
};
-/* Ultra DMA timings (for use when I know how to calculate them */
-static pmac_ide_timing udma_timings[] =
+struct mdma_timings_t mdma_timings_33k[] __pmacdata =
{
- { 0, 114 }, /* Mode 0 */
- { 0, 75 }, /* 1 */
- { 0, 55 }, /* 2 */
- { 100, 45 }, /* 3 */
- { 100, 25 } /* 4 */
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 150, 150, 300 },
+ { 120, 120, 240 },
+ { 90, 120, 210 },
+ { 90, 90, 180 },
+ { 90, 60, 150 },
+ { 90, 30, 120 },
+ { 0, 0, 0 }
+};
+
+struct mdma_timings_t mdma_timings_66[] __pmacdata =
+{
+ { 240, 240, 480 },
+ { 180, 180, 360 },
+ { 135, 135, 270 },
+ { 120, 120, 240 },
+ { 105, 105, 210 },
+ { 90, 90, 180 },
+ { 90, 75, 165 },
+ { 75, 45, 120 },
+ { 0, 0, 0 }
+};
+
+/* Ultra DMA timings (rounded) */
+struct {
+ int addrSetup; /* ??? */
+ int rdy2pause;
+ int wrDataSetup;
+} udma_timings[] __pmacdata =
+{
+ { 0, 180, 120 }, /* Mode 0 */
+ { 0, 150, 90 }, /* 1 */
+ { 0, 120, 60 }, /* 2 */
+ { 0, 90, 45 }, /* 3 */
+ { 0, 90, 30 } /* 4 */
};
/* allow up to 256 DBDMA commands per xfer */
@@ -124,7 +271,7 @@
};
#endif /* CONFIG_PMAC_PBOOK */
-static int
+static int __pmac
pmac_ide_find(ide_drive_t *drive)
{
struct ata_channel *hwif = drive->channel;
@@ -143,7 +290,8 @@
* N.B. this can't be an initfunc, because the media-bay task can
* call ide_[un]register at any time.
*/
-void pmac_ide_init_hwif_ports(hw_regs_t *hw,
+void __pmac
+pmac_ide_init_hwif_ports(hw_regs_t *hw,
ide_ioreg_t data_port, ide_ioreg_t ctrl_port,
int *irq)
{
@@ -174,7 +322,7 @@
ide_hwifs[ix].tuneproc = pmac_ide_tuneproc;
ide_hwifs[ix].selectproc = pmac_ide_selectproc;
ide_hwifs[ix].speedproc = &pmac_ide_tune_chipset;
- if (pmac_ide[ix].dma_regs && pmac_ide[ix].dma_table) {
+ if (pmac_ide[ix].dma_regs && pmac_ide[ix].dma_table_cpu) {
ide_hwifs[ix].dmaproc = &pmac_ide_dmaproc;
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
if (!noautodma)
@@ -201,24 +349,33 @@
/* Setup timings for the selected drive (master/slave). I still need to verify if this
* is enough, I beleive selectproc will be called whenever an IDE command is started,
* but... */
-static void
+static void __pmac
pmac_ide_selectproc(ide_drive_t *drive)
{
int i = pmac_ide_find(drive);
if (i < 0)
return;
-
- if (drive->select.all & 0x10)
- out_le32((unsigned *)(IDE_DATA_REG + 0x200 + _IO_BASE), pmac_ide[i].timings[1]);
+
+ if (drive->select.b.unit & 0x01)
+ out_le32((unsigned *)(IDE_DATA_REG + IDE_TIMING_CONFIG + _IO_BASE),
+ pmac_ide[i].timings[1]);
else
- out_le32((unsigned *)(IDE_DATA_REG + 0x200 + _IO_BASE), pmac_ide[i].timings[0]);
+ out_le32((unsigned *)(IDE_DATA_REG + IDE_TIMING_CONFIG + _IO_BASE),
+ pmac_ide[i].timings[0]);
+ (void)in_le32((unsigned *)(IDE_DATA_REG + IDE_TIMING_CONFIG + _IO_BASE));
}
-/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
-#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
-#define SYSCLK_TICKS_UDMA(t) (((t) + IDE_SYSCLK_ULTRA_PS - 1) / IDE_SYSCLK_ULTRA_PS)
-static __inline__ int
+/* Note: We don't use the generic routine here because for some
+ * yet unexplained reasons, it cause some media-bay CD-ROMs to
+ * lockup the bus. Strangely, this new version of the code is
+ * almost identical to the generic one and works, I've not yet
+ * managed to figure out what bit is causing the lockup in the
+ * generic code, possibly a timing issue...
+ *
+ * --BenH
+ */
+static int __pmac
wait_for_ready(ide_drive_t *drive)
{
/* Timeout bumped for some powerbooks */
@@ -244,57 +401,80 @@
return 0;
}
-/* Note: We don't use the generic routine here because some of Apple's
- * controller seem to be very sensitive about how things are done.
- * We should probably set the NIEN bit, but that's an example of thing
- * that can cause the controller to hang under some circumstances when
- * done on the media-bay CD-ROM during boot. We do get occasional
- * spurrious interrupts because of that.
- * --BenH
- */
-static int
+static int __pmac
pmac_ide_do_setfeature(ide_drive_t *drive, byte command)
{
- unsigned long flags;
int result = 1;
-
- save_flags(flags);
- cli();
+ unsigned long flags;
+ struct ata_channel *hwif = HWIF(drive);
+
+ disable_irq(hwif->irq); /* disable_irq_nosync ?? */
udelay(1);
SELECT_DRIVE(drive->channel, drive);
SELECT_MASK(drive->channel, drive, 0);
udelay(1);
+ (void)GET_STAT(); /* Get rid of pending error state */
if(wait_for_ready(drive)) {
printk(KERN_ERR "pmac_ide_do_setfeature disk not ready before SET_FEATURE!\n");
goto out;
}
- OUT_BYTE(SETFEATURES_XFER, IDE_FEATURE_REG);
+ udelay(10);
+ OUT_BYTE(drive->ctl | 2, IDE_CONTROL_REG);
OUT_BYTE(command, IDE_NSECTOR_REG);
+ OUT_BYTE(SETFEATURES_XFER, IDE_FEATURE_REG);
OUT_BYTE(WIN_SETFEATURES, IDE_COMMAND_REG);
udelay(1);
+ __save_flags(flags); /* local CPU only */
+ ide__sti(); /* local CPU only -- for jiffies */
result = wait_for_ready(drive);
+ __restore_flags(flags); /* local CPU only */
+ OUT_BYTE(drive->ctl, IDE_CONTROL_REG);
if (result)
printk(KERN_ERR "pmac_ide_do_setfeature disk not ready after SET_FEATURE !\n");
out:
- restore_flags(flags);
+ SELECT_MASK(HWIF(drive), drive, 0);
+ if (result == 0) {
+ drive->id->dma_ultra &= ~0xFF00;
+ drive->id->dma_mword &= ~0x0F00;
+ drive->id->dma_1word &= ~0x0F00;
+ switch(command) {
+ case XFER_UDMA_7: drive->id->dma_ultra |= 0x8080; break;
+ case XFER_UDMA_6: drive->id->dma_ultra |= 0x4040; break;
+ case XFER_UDMA_5: drive->id->dma_ultra |= 0x2020; break;
+ case XFER_UDMA_4: drive->id->dma_ultra |= 0x1010; break;
+ case XFER_UDMA_3: drive->id->dma_ultra |= 0x0808; break;
+ case XFER_UDMA_2: drive->id->dma_ultra |= 0x0404; break;
+ case XFER_UDMA_1: drive->id->dma_ultra |= 0x0202; break;
+ case XFER_UDMA_0: drive->id->dma_ultra |= 0x0101; break;
+ case XFER_MW_DMA_2: drive->id->dma_mword |= 0x0404; break;
+ case XFER_MW_DMA_1: drive->id->dma_mword |= 0x0202; break;
+ case XFER_MW_DMA_0: drive->id->dma_mword |= 0x0101; break;
+ case XFER_SW_DMA_2: drive->id->dma_1word |= 0x0404; break;
+ case XFER_SW_DMA_1: drive->id->dma_1word |= 0x0202; break;
+ case XFER_SW_DMA_0: drive->id->dma_1word |= 0x0101; break;
+ default: break;
+ }
+ }
+ enable_irq(hwif->irq);
return result;
}
/* Calculate PIO timings */
-static void
+static void __pmac
pmac_ide_tuneproc(ide_drive_t *drive, byte pio)
{
struct ata_timing *t;
int i;
u32 *timings;
- int accessTicks, recTicks;
+ unsigned accessTicks, recTicks;
+ unsigned accessTime, recTime;
i = pmac_ide_find(drive);
if (i < 0)
return;
- if (pio = 255)
+ if (pio == 255)
pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO);
else
pio = XFER_PIO_0 + min_t(byte, pio, 4);
@@ -302,27 +482,40 @@
t = ata_timing_data(pio);
accessTicks = SYSCLK_TICKS(t->active);
- if (drive->select.all & 0x10)
- timings = &pmac_ide[i].timings[1];
- else
- timings = &pmac_ide[i].timings[0];
-
- if (pmac_ide[i].kind == controller_kl_ata4) {
- /* The "ata-4" IDE controller of Core99 machines */
- accessTicks = SYSCLK_TICKS_UDMA(t->active * 1000);
- recTicks = SYSCLK_TICKS_UDMA(t->cycle * 1000) - accessTicks;
+ timings = &pmac_ide[i].timings[drive->select.b.unit & 0x01];
- *timings = ((*timings) & 0x1FFFFFC00) | accessTicks | (recTicks << 5);
+ recTime = t->cycle - t->active - t->setup;
+ recTime = max(recTime, 150U);
+ accessTime = t->active;
+ accessTime = max(accessTime, 150U);
+ if (pmac_ide[i].kind == controller_kl_ata4 ||
+ pmac_ide[i].kind == controller_kl_ata4_80) {
+ /* 66Mhz cell */
+ accessTicks = SYSCLK_TICKS_66(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ recTicks = SYSCLK_TICKS_66(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ *timings = ((*timings) & ~TR_66_PIO_MASK) |
+ (accessTicks << TR_66_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_66_PIO_RECOVERY_SHIFT);
} else {
- /* The old "ata-3" IDE controller */
- accessTicks = SYSCLK_TICKS(t->active);
- if (accessTicks < 4)
- accessTicks = 4;
- recTicks = SYSCLK_TICKS(t->cycle) - accessTicks - 4;
- if (recTicks < 1)
- recTicks = 1;
-
- *timings = ((*timings) & 0xFFFFFF800) | accessTicks | (recTicks << 5);
+ /* 33Mhz cell */
+ int ebit = 0;
+ accessTicks = SYSCLK_TICKS(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTicks = max(accessTicks, 4U);
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ recTicks = max(recTicks, 5U) - 4;
+ if (recTicks > 9) {
+ recTicks--; /* guess, but it's only for PIO0, so... */
+ ebit = 1;
+ }
+ *timings = ((*timings) & ~TR_33_PIO_MASK) |
+ (accessTicks << TR_33_PIO_ACCESS_SHIFT) |
+ (recTicks << TR_33_PIO_RECOVERY_SHIFT);
+ if (ebit)
+ *timings |= TR_33_PIO_E;
}
#ifdef IDE_PMAC_DEBUG
@@ -335,70 +528,134 @@
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-static int
-set_timings_udma(int intf, u32 *timings, byte speed)
+static int __pmac
+set_timings_udma(u32 *timings, byte speed)
{
- int cycleTime, accessTime;
- int rdyToPauseTicks, cycleTicks;
-
- if (pmac_ide[intf].kind != controller_kl_ata4)
- return 1;
-
- cycleTime = udma_timings[speed & 0xf].cycleTime;
- accessTime = udma_timings[speed & 0xf].accessTime;
-
- rdyToPauseTicks = SYSCLK_TICKS_UDMA(accessTime * 1000);
- cycleTicks = SYSCLK_TICKS_UDMA(cycleTime * 1000);
+ unsigned rdyToPauseTicks, wrDataSetupTicks, addrTicks;
- *timings = ((*timings) & 0xe00fffff) |
- ((cycleTicks << 1) | (rdyToPauseTicks << 5) | 1) << 20;
+ rdyToPauseTicks = SYSCLK_TICKS_66(udma_timings[speed & 0xf].rdy2pause);
+ wrDataSetupTicks = SYSCLK_TICKS_66(udma_timings[speed & 0xf].wrDataSetup);
+ addrTicks = SYSCLK_TICKS_66(udma_timings[speed & 0xf].addrSetup);
+
+ *timings = ((*timings) & ~(TR_66_UDMA_MASK | TR_66_MDMA_MASK)) |
+ (wrDataSetupTicks << TR_66_UDMA_WRDATASETUP_SHIFT) |
+ (rdyToPauseTicks << TR_66_UDMA_RDY2PAUS_SHIFT) |
+ (addrTicks <<TR_66_UDMA_ADDRSETUP_SHIFT) |
+ TR_66_UDMA_EN;
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "ide_pmac: Set UDMA timing for mode %d, reg: 0x%08x\n",
+ speed & 0xf, *timings);
+#endif
return 0;
}
-static int
-set_timings_mdma(int intf, u32 *timings, byte speed)
+static int __pmac
+set_timings_mdma(int intf_type, u32 *timings, byte speed, int drive_cycle_time)
{
- int cycleTime, accessTime;
- int accessTicks, recTicks;
+ int cycleTime, accessTime, recTime;
+ unsigned accessTicks, recTicks;
+ struct mdma_timings_t* tm;
+ int i;
- /* Calculate accesstime and cycle time */
- cycleTime = mdma_timings[speed & 0xf].cycleTime;
- accessTime = mdma_timings[speed & 0xf].accessTime;
- if ((pmac_ide[intf].kind == controller_ohare) && (cycleTime < 150))
+ /* Get default cycle time for mode */
+ switch(speed & 0xf) {
+ case 0: cycleTime = 480; break;
+ case 1: cycleTime = 150; break;
+ case 2: cycleTime = 120; break;
+ default:
+ return -1;
+ }
+ /* Adjust for drive */
+ if (drive_cycle_time && drive_cycle_time > cycleTime)
+ cycleTime = drive_cycle_time;
+ /* OHare limits according to some old Apple sources */
+ if ((intf_type == controller_ohare) && (cycleTime < 150))
cycleTime = 150;
+ /* Get the proper timing array for this controller */
+ switch(intf_type) {
+ case controller_kl_ata4:
+ case controller_kl_ata4_80:
+ tm = mdma_timings_66;
+ break;
+ case controller_kl_ata3:
+ tm = mdma_timings_33k;
+ break;
+ default:
+ tm = mdma_timings_33;
+ break;
+ }
+ /* Lookup matching access & recovery times */
+ i = -1;
+ for (;;) {
+ if (tm[i+1].cycleTime < cycleTime)
+ break;
+ i++;
+ }
+ if (i < 0)
+ return -1;
+ cycleTime = tm[i].cycleTime;
+ accessTime = tm[i].accessTime;
+ recTime = tm[i].recoveryTime;
- /* For ata-4 controller */
- if (pmac_ide[intf].kind == controller_kl_ata4) {
- accessTicks = SYSCLK_TICKS_UDMA(accessTime * 1000);
- recTicks = SYSCLK_TICKS_UDMA(cycleTime * 1000) - accessTicks;
- *timings = ((*timings) & 0xffe003ff) |
- (accessTicks | (recTicks << 5)) << 10;
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "ide_pmac: MDMA, cycleTime: %d, accessTime: %d, recTime: %d\n",
+ cycleTime, accessTime, recTime);
+#endif
+ if (intf_type == controller_kl_ata4 || intf_type == controller_kl_ata4_80) {
+ /* 66Mhz cell */
+ accessTicks = SYSCLK_TICKS_66(accessTime);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTicks = max(accessTicks, 0x1U);
+ recTicks = SYSCLK_TICKS_66(recTime);
+ recTicks = min(recTicks, 0x1fU);
+ recTicks = max(recTicks, 0x3U);
+ /* Clear out mdma bits and disable udma */
+ *timings = ((*timings) & ~(TR_66_MDMA_MASK | TR_66_UDMA_MASK)) |
+ (accessTicks << TR_66_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_66_MDMA_RECOVERY_SHIFT);
+ } else if (intf_type == controller_kl_ata3) {
+ /* 33Mhz cell on KeyLargo */
+ accessTicks = SYSCLK_TICKS(accessTime);
+ accessTicks = max(accessTicks, 1U);
+ accessTicks = min(accessTicks, 0x1fU);
+ accessTime = accessTicks * IDE_SYSCLK_NS;
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = max(recTicks, 1U);
+ recTicks = min(recTicks, 0x1fU);
+ *timings = ((*timings) & ~TR_33_MDMA_MASK) |
+ (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
} else {
+ /* 33Mhz cell on others */
int halfTick = 0;
int origAccessTime = accessTime;
- int origCycleTime = cycleTime;
+ int origRecTime = recTime;
accessTicks = SYSCLK_TICKS(accessTime);
- if (accessTicks < 1)
- accessTicks = 1;
+ accessTicks = max(accessTicks, 1U);
+ accessTicks = min(accessTicks, 0x1fU);
accessTime = accessTicks * IDE_SYSCLK_NS;
- recTicks = SYSCLK_TICKS(cycleTime - accessTime) - 1;
- if (recTicks < 1)
- recTicks = 1;
- cycleTime = (recTicks + 1 + accessTicks) * IDE_SYSCLK_NS;
-
- /* KeyLargo ata-3 don't support the half-tick stuff */
- if ((pmac_ide[intf].kind != controller_kl_ata3) &&
- (accessTicks > 1) &&
- ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
- ((cycleTime - IDE_SYSCLK_NS) >= origCycleTime)) {
- halfTick = 1;
- accessTicks--;
+ recTicks = SYSCLK_TICKS(recTime);
+ recTicks = max(recTicks, 2U) - 1;
+ recTicks = min(recTicks, 0x1fU);
+ recTime = (recTicks + 1) * IDE_SYSCLK_NS;
+ if ((accessTicks > 1) &&
+ ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
+ ((recTime - IDE_SYSCLK_NS/2) >= origRecTime)) {
+ halfTick = 1;
+ accessTicks--;
}
- *timings = ((*timings) & 0x7FF) |
- (accessTicks | (recTicks << 5) | (halfTick << 10)) << 11;
+ *timings = ((*timings) & ~TR_33_MDMA_MASK) |
+ (accessTicks << TR_33_MDMA_ACCESS_SHIFT) |
+ (recTicks << TR_33_MDMA_RECOVERY_SHIFT);
+ if (halfTick)
+ *timings |= TR_33_MDMA_HALFTICK;
}
+#ifdef IDE_PMAC_DEBUG
+ printk(KERN_ERR "ide_pmac: Set MDMA timing for mode %d, reg: 0x%08x\n",
+ speed & 0xf, *timings);
+#endif
return 0;
}
#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
@@ -406,11 +663,11 @@
/* You may notice we don't use this function on normal operation,
* our, normal mdma function is supposed to be more precise
*/
-static int
+static int __pmac
pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
{
int intf = pmac_ide_find(drive);
- int unit = (drive->select.all & 0x10) ? 1:0;
+ int unit = (drive->select.b.unit & 0x01);
int ret = 0;
u32 *timings;
@@ -423,19 +680,25 @@
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
case XFER_UDMA_4:
case XFER_UDMA_3:
+ if (pmac_ide[intf].kind != controller_kl_ata4_80)
+ return 1;
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
- ret = set_timings_udma(intf, timings, speed);
+ if (pmac_ide[intf].kind != controller_kl_ata4 &&
+ pmac_ide[intf].kind != controller_kl_ata4_80)
+ return 1;
+ ret = set_timings_udma(timings, speed);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
+ ret = set_timings_mdma(pmac_ide[intf].kind, timings, speed, 0);
+ break;
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
- ret = set_timings_mdma(intf, timings, speed);
- break;
+ return 1;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
case XFER_PIO_4:
case XFER_PIO_3:
@@ -460,13 +723,46 @@
return 0;
}
-ide_ioreg_t
+static void __pmac
+sanitize_timings(int i)
+{
+ unsigned value;
+
+ switch(pmac_ide[i].kind) {
+ case controller_kl_ata4:
+ case controller_kl_ata4_80:
+ value = 0x0008438c;
+ break;
+ case controller_kl_ata3:
+ value = 0x00084526;
+ break;
+ case controller_heathrow:
+ case controller_ohare:
+ default:
+ value = 0x00074526;
+ break;
+ }
+ pmac_ide[i].timings[0] = pmac_ide[i].timings[1] = value;
+}
+
+ide_ioreg_t __pmac
pmac_ide_get_base(int index)
{
return pmac_ide[index].regbase;
}
-int
+int __pmac
+pmac_ide_check_base(ide_ioreg_t base)
+{
+ int ix;
+
+ for (ix = 0; ix < MAX_HWIFS; ++ix)
+ if (base == pmac_ide[ix].regbase)
+ return ix;
+ return -1;
+}
+
+int __pmac
pmac_ide_get_irq(ide_ioreg_t base)
{
int ix;
@@ -477,7 +773,7 @@
return 0;
}
-static int ide_majors[] = { 3, 22, 33, 34, 56, 57 };
+static int ide_majors[] __pmacdata = { 3, 22, 33, 34, 56, 57 };
kdev_t __init
pmac_find_ide_boot(char *bootdevice, int n)
@@ -494,11 +790,11 @@
name = pmac_ide[i].node->full_name;
if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) {
/* XXX should cope with the 2nd drive as well... */
- return MKDEV(ide_majors[i], 0);
+ return mk_kdev(ide_majors[i], 0);
}
}
- return 0;
+ return NODEV;
}
void __init
@@ -541,9 +837,12 @@
for (i = 0, np = atas; i < MAX_HWIFS && np != NULL; np = np->next) {
struct device_node *tp;
+ struct pmac_ide_hwif *pmif;
int *bidp;
int in_bay = 0;
-
+ u8 pbus, pid;
+ struct pci_dev *pdev = NULL;
+
/*
* If this node is not under a mac-io or dbdma node,
* leave it to the generic PCI driver.
@@ -561,6 +860,15 @@
continue;
}
+ /* We need to find the pci_dev of the mac-io holding the
+ * IDE interface
+ */
+ if (pci_device_from_OF_node(tp, &pbus, &pid) == 0)
+ pdev = pci_find_slot(pbus, pid);
+ if (pdev == NULL)
+ printk(KERN_WARNING "ide: no PCI host for device %s, DMA disabled\n",
+ np->full_name);
+
/*
* If this slot is taken (e.g. by ide-pci.c) try the next one.
*/
@@ -569,8 +877,23 @@
++i;
if (i >= MAX_HWIFS)
break;
+ pmif = &pmac_ide[i];
- base = (unsigned long) ioremap(np->addrs[0].address, 0x200) - _IO_BASE;
+ /*
+ * Some older OFs have bogus sizes, causing request_OF_resource
+ * to fail. We fix them up here
+ */
+ if (np->addrs[0].size > 0x1000)
+ np->addrs[0].size = 0x1000;
+ if (np->n_addrs > 1 && np->addrs[1].size > 0x100)
+ np->addrs[1].size = 0x100;
+
+ if (request_OF_resource(np, 0, " (mac-io IDE IO)") == NULL) {
+ printk(KERN_ERR "ide-pmac(%s): can't request IO resource !\n", np->name);
+ continue;
+ }
+
+ base = (unsigned long) ioremap(np->addrs[0].address, 0x400) - _IO_BASE;
/* XXX This is bogus. Should be fixed in the registry by checking
the kind of host interrupt controller, a bit like gatwick
@@ -583,21 +906,30 @@
} else {
irq = np->intrs[0].line;
}
- pmac_ide[i].regbase = base;
- pmac_ide[i].irq = irq;
- pmac_ide[i].node = np;
+ pmif->regbase = base;
+ pmif->irq = irq;
+ pmif->node = np;
if (device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0)
- pmac_ide[i].kind = controller_kl_ata4;
+ pmif->kind = controller_kl_ata4;
else
- pmac_ide[i].kind = controller_kl_ata3;
+ pmif->kind = controller_kl_ata3;
} else if (device_is_compatible(np, "heathrow-ata"))
- pmac_ide[i].kind = controller_heathrow;
+ pmif->kind = controller_heathrow;
else
- pmac_ide[i].kind = controller_ohare;
+ pmif->kind = controller_ohare;
bidp = (int *)get_property(np, "AAPL,bus-id", NULL);
- pmac_ide[i].aapl_bus_id = bidp ? *bidp : 0;
+ pmif->aapl_bus_id = bidp ? *bidp : 0;
+
+ if (pmif->kind == controller_kl_ata4) {
+ char* cable = get_property(np, "cable-type", NULL);
+ if (cable && !strncmp(cable, "80-", 3))
+ pmif->kind = controller_kl_ata4_80;
+ }
+
+ /* Make sure we have sane timings */
+ sanitize_timings(i);
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
@@ -605,39 +937,22 @@
media_bay_set_ide_infos(np->parent,base,irq,i);
#endif /* CONFIG_PMAC_PBOOK */
in_bay = 1;
- } else if (pmac_ide[i].kind == controller_ohare) {
+ if (!bidp)
+ pmif->aapl_bus_id = 1;
+ } else if (pmif->kind == controller_ohare) {
/* The code below is having trouble on some ohare machines
* (timing related ?). Until I can put my hand on one of these
* units, I keep the old way
*/
- feature_set(np, FEATURE_IDE0_enable);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
} else {
/* This is necessary to enable IDE when net-booting */
printk(KERN_INFO "pmac_ide: enabling IDE bus ID %d\n",
- pmac_ide[i].aapl_bus_id);
- switch(pmac_ide[i].aapl_bus_id) {
- case 0:
- feature_set(np, FEATURE_IDE0_reset);
- mdelay(10);
- feature_set(np, FEATURE_IDE0_enable);
- mdelay(10);
- feature_clear(np, FEATURE_IDE0_reset);
- break;
- case 1:
- feature_set(np, FEATURE_IDE1_reset);
- mdelay(10);
- feature_set(np, FEATURE_IDE1_enable);
- mdelay(10);
- feature_clear(np, FEATURE_IDE1_reset);
- break;
- case 2:
- /* This one exists only for KL, I don't know
- about any enable bit */
- feature_set(np, FEATURE_IDE2_reset);
- mdelay(10);
- feature_clear(np, FEATURE_IDE2_reset);
- break;
- }
+ pmif->aapl_bus_id);
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
+ mdelay(10);
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 0);
big_delay = 1;
}
@@ -646,13 +961,15 @@
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
hwif->chipset = ide_pmac;
hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET] || in_bay;
+ hwif->udma_four = (pmif->kind == controller_kl_ata4_80);
+ hwif->pci_dev = pdev;
#ifdef CONFIG_PMAC_PBOOK
if (in_bay && check_media_bay_by_base(base, MB_CD) == 0)
hwif->noprobe = 0;
#endif /* CONFIG_PMAC_PBOOK */
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- if (np->n_addrs >= 2) {
+ if (pdev && np->n_addrs >= 2) {
/* has a DBDMA controller channel */
pmac_ide_setup_dma(np, i);
}
@@ -674,7 +991,15 @@
static void __init
pmac_ide_setup_dma(struct device_node *np, int ix)
{
- pmac_ide[ix].dma_regs =
+ struct pmac_ide_hwif *pmif = &pmac_ide[ix];
+
+ if (request_OF_resource(np, 1, " (mac-io IDE DMA)") == NULL) {
+ printk(KERN_ERR "ide-pmac(%s): can't request DMA resource !\n",
+ np->name);
+ return;
+ }
+
+ pmif->dma_regs =
(volatile struct dbdma_regs*)ioremap(np->addrs[1].address, 0x200);
/*
@@ -682,14 +1007,24 @@
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
- pmac_ide[ix].dma_table = (struct dbdma_cmd*)
- kmalloc((MAX_DCMDS + 2) * sizeof(struct dbdma_cmd), GFP_KERNEL);
- if (pmac_ide[ix].dma_table == 0) {
+ pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+ ide_hwifs[ix].pci_dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ &pmif->dma_table_dma);
+ if (pmif->dma_table_cpu == NULL) {
printk(KERN_ERR "%s: unable to allocate DMA command list\n",
ide_hwifs[ix].name);
return;
}
+ pmif->sg_table = kmalloc(sizeof(struct scatterlist) * MAX_DCMDS,
+ GFP_KERNEL);
+ if (pmif->sg_table == NULL) {
+ pci_free_consistent( ide_hwifs[ix].pci_dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ pmif->dma_table_cpu, pmif->dma_table_dma);
+ return;
+ }
ide_hwifs[ix].dmaproc = &pmac_ide_dmaproc;
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC_AUTO
if (!noautodma)
@@ -697,6 +1032,62 @@
#endif
}
+static int
+pmac_ide_build_sglist (int ix, struct request *rq)
+{
+ struct ata_channel *hwif = &ide_hwifs[ix];
+ struct pmac_ide_hwif *pmif = &pmac_ide[ix];
+ request_queue_t *q = &hwif->drives[DEVICE_NR(rq->rq_dev) & 1].queue;
+ struct scatterlist *sg = pmif->sg_table;
+ int nents;
+
+ nents = blk_rq_map_sg(q, rq, pmif->sg_table);
+
+ if (rq->q && nents > rq->nr_phys_segments)
+ printk("ide-pmac: received %d phys segments, build %d\n", rq->nr_phys_segments, nents);
+
+ if (rq_data_dir(rq) == READ)
+ pmif->sg_dma_direction = PCI_DMA_FROMDEVICE;
+ else
+ pmif->sg_dma_direction = PCI_DMA_TODEVICE;
+
+ return pci_map_sg(hwif->pci_dev, sg, nents, pmif->sg_dma_direction);
+}
+
+static int
+pmac_ide_raw_build_sglist (int ix, struct request *rq)
+{
+ struct ata_channel *hwif = &ide_hwifs[ix];
+ struct pmac_ide_hwif *pmif = &pmac_ide[ix];
+ struct scatterlist *sg = pmif->sg_table;
+ int nents = 0;
+ ide_task_t *args = rq->special;
+ unsigned char *virt_addr = rq->buffer;
+ int sector_count = rq->nr_sectors;
+
+ if (args->command_type == IDE_DRIVE_TASK_RAW_WRITE)
+ pmif->sg_dma_direction = PCI_DMA_TODEVICE;
+ else
+ pmif->sg_dma_direction = PCI_DMA_FROMDEVICE;
+
+ if (sector_count > 128) {
+ memset(&sg[nents], 0, sizeof(*sg));
+ sg[nents].page = virt_to_page(virt_addr);
+ sg[nents].offset = (unsigned long) virt_addr & ~PAGE_MASK;
+ sg[nents].length = 128 * SECTOR_SIZE;
+ nents++;
+ virt_addr = virt_addr + (128 * SECTOR_SIZE);
+ sector_count -= 128;
+ }
+ memset(&sg[nents], 0, sizeof(*sg));
+ sg[nents].page = virt_to_page(virt_addr);
+ sg[nents].offset = (unsigned long) virt_addr & ~PAGE_MASK;
+ sg[nents].length = sector_count * SECTOR_SIZE;
+ nents++;
+
+ return pci_map_sg(hwif->pci_dev, sg, nents, pmif->sg_dma_direction);
+}
+
/*
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
@@ -704,47 +1095,40 @@
static int
pmac_ide_build_dmatable(ide_drive_t *drive, int ix, int wr)
{
- struct dbdma_cmd *table, *tstart;
- int count = 0;
+ struct dbdma_cmd *table;
+ int i, count = 0;
struct request *rq = HWGROUP(drive)->rq;
- struct buffer_head *bh = rq->bh;
- unsigned int size, addr;
volatile struct dbdma_regs *dma = pmac_ide[ix].dma_regs;
+ struct scatterlist *sg;
+
+ /* DMA table is already aligned */
+ table = (struct dbdma_cmd *) pmac_ide[ix].dma_table_cpu;
- table = tstart = (struct dbdma_cmd *) DBDMA_ALIGN(pmac_ide[ix].dma_table);
+ /* Make sure DMA controller is stopped (necessary ?) */
out_le32(&dma->control, (RUN|PAUSE|FLUSH|WAKE|DEAD) << 16);
while (in_le32(&dma->status) & RUN)
udelay(1);
- do {
- /*
- * Determine addr and size of next buffer area. We assume that
- * individual virtual buffers are always composed linearly in
- * physical memory. For example, we assume that any 8kB buffer
- * is always composed of two adjacent physical 4kB pages rather
- * than two possibly non-adjacent physical 4kB pages.
- */
- if (bh == NULL) { /* paging requests have (rq->bh == NULL) */
- addr = virt_to_bus(rq->buffer);
- size = rq->nr_sectors << 9;
- } else {
- /* group sequential buffers into one large buffer */
- addr = virt_to_bus(bh->b_data);
- size = bh->b_size;
- while ((bh = bh->b_reqnext) != NULL) {
- if ((addr + size) != virt_to_bus(bh->b_data))
- break;
- size += bh->b_size;
- }
- }
+ /* Build sglist */
+ if (rq->flags & REQ_DRIVE_TASKFILE) {
+ pmac_ide[ix].sg_nents = i = pmac_ide_raw_build_sglist(ix, rq);
+ } else {
+ pmac_ide[ix].sg_nents = i = pmac_ide_build_sglist(ix, rq);
+ }
+ if (!i)
+ return 0;
- /*
- * Fill in the next DBDMA command block.
- * Note that one DBDMA command can transfer
- * at most 65535 bytes.
- */
- while (size) {
- unsigned int tc = (size < 0xfe00)? size: 0xfe00;
+ /* Build DBDMA commands list */
+ sg = pmac_ide[ix].sg_table;
+ while (i) {
+ u32 cur_addr;
+ u32 cur_len;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ while (cur_len) {
+ unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
if (++count >= MAX_DCMDS) {
printk(KERN_WARNING "%s: DMA table too small\n",
@@ -753,15 +1137,17 @@
}
st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE);
st_le16(&table->req_count, tc);
- st_le32(&table->phy_addr, addr);
+ st_le32(&table->phy_addr, cur_addr);
table->cmd_dep = 0;
table->xfer_status = 0;
table->res_count = 0;
- addr += tc;
- size -= tc;
+ cur_addr += tc;
+ cur_len -= tc;
++table;
}
- } while (bh != NULL);
+ sg++;
+ i--;
+ }
/* convert the last command to an input/output last command */
if (count)
@@ -773,10 +1159,24 @@
memset(table, 0, sizeof(struct dbdma_cmd));
out_le16(&table->command, DBDMA_STOP);
- out_le32(&dma->cmdptr, virt_to_bus(tstart));
+ out_le32(&dma->cmdptr, pmac_ide[ix].dma_table_dma);
return 1;
}
+/* Teardown mappings after DMA has completed. */
+static void
+pmac_ide_destroy_dmatable (ide_drive_t *drive, int ix)
+{
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ struct scatterlist *sg = pmac_ide[ix].sg_table;
+ int nents = pmac_ide[ix].sg_nents;
+
+ if (nents) {
+ pci_unmap_sg(dev, sg, nents, pmac_ide[ix].sg_dma_direction);
+ pmac_ide[ix].sg_nents = 0;
+ }
+}
+
static __inline__ unsigned char
dma_bits_to_command(unsigned char bits)
@@ -791,12 +1191,14 @@
}
static __inline__ unsigned char
-udma_bits_to_command(unsigned char bits)
+udma_bits_to_command(unsigned char bits, int high_speed)
{
- if(bits & 0x10)
- return XFER_UDMA_4;
- if(bits & 0x08)
- return XFER_UDMA_3;
+ if (high_speed) {
+ if(bits & 0x10)
+ return XFER_UDMA_4;
+ if(bits & 0x08)
+ return XFER_UDMA_3;
+ }
if(bits & 0x04)
return XFER_UDMA_2;
if(bits & 0x02)
@@ -807,14 +1209,13 @@
}
/* Calculate MultiWord DMA timings */
-static int
+static int __pmac
pmac_ide_mdma_enable(ide_drive_t *drive, int idx)
{
byte bits = drive->id->dma_mword & 0x07;
byte feature = dma_bits_to_command(bits);
u32 *timings;
- int cycleTime, accessTime;
- int accessTicks, recTicks;
+ int drive_cycle_time;
struct hd_driveid *id = drive->id;
int ret;
@@ -830,66 +1231,30 @@
drive->init_speed = feature;
/* which drive is it ? */
- if (drive->select.all & 0x10)
+ if (drive->select.b.unit & 0x01)
timings = &pmac_ide[idx].timings[1];
else
timings = &pmac_ide[idx].timings[0];
- /* Calculate accesstime and cycle time */
- cycleTime = mdma_timings[feature & 0xf].cycleTime;
- accessTime = mdma_timings[feature & 0xf].accessTime;
+ /* Check if drive provide explicit cycle time */
if ((id->field_valid & 2) && (id->eide_dma_time))
- cycleTime = id->eide_dma_time;
- if ((pmac_ide[idx].kind == controller_ohare) && (cycleTime < 150))
- cycleTime = 150;
+ drive_cycle_time = id->eide_dma_time;
+ else
+ drive_cycle_time = 0;
+
+ /* Calculate controller timings */
+ set_timings_mdma(pmac_ide[idx].kind, timings, feature, drive_cycle_time);
- /* For ata-4 controller */
- if (pmac_ide[idx].kind == controller_kl_ata4) {
- accessTicks = SYSCLK_TICKS_UDMA(accessTime * 1000);
- recTicks = SYSCLK_TICKS_UDMA(cycleTime * 1000) - accessTicks;
- *timings = ((*timings) & 0xffe003ff) |
- (accessTicks | (recTicks << 5)) << 10;
- } else {
- int halfTick = 0;
- int origAccessTime = accessTime;
- int origCycleTime = cycleTime;
-
- accessTicks = SYSCLK_TICKS(accessTime);
- if (accessTicks < 1)
- accessTicks = 1;
- accessTime = accessTicks * IDE_SYSCLK_NS;
- recTicks = SYSCLK_TICKS(cycleTime - accessTime) - 1;
- if (recTicks < 1)
- recTicks = 1;
- cycleTime = (recTicks + 1 + accessTicks) * IDE_SYSCLK_NS;
-
- /* KeyLargo ata-3 don't support the half-tick stuff */
- if ((pmac_ide[idx].kind != controller_kl_ata3) &&
- (accessTicks > 1) &&
- ((accessTime - IDE_SYSCLK_NS/2) >= origAccessTime) &&
- ((cycleTime - IDE_SYSCLK_NS) >= origCycleTime)) {
- halfTick = 1;
- accessTicks--;
- }
- *timings = ((*timings) & 0x7FF) |
- (accessTicks | (recTicks << 5) | (halfTick << 10)) << 11;
- }
-#ifdef IDE_PMAC_DEBUG
- printk(KERN_INFO "ide_pmac: Set MDMA timing for mode %d, reg: 0x%08x\n",
- feature & 0xf, *timings);
-#endif
drive->current_speed = feature;
return 1;
}
/* Calculate Ultra DMA timings */
-static int
-pmac_ide_udma_enable(ide_drive_t *drive, int idx)
+static int __pmac
+pmac_ide_udma_enable(ide_drive_t *drive, int idx, int high_speed)
{
byte bits = drive->id->dma_ultra & 0x1f;
- byte feature = udma_bits_to_command(bits);
- int cycleTime, accessTime;
- int rdyToPauseTicks, cycleTicks;
+ byte feature = udma_bits_to_command(bits, high_speed);
u32 *timings;
int ret;
@@ -905,25 +1270,18 @@
drive->init_speed = feature;
/* which drive is it ? */
- if (drive->select.all & 0x10)
+ if (drive->select.b.unit & 0x01)
timings = &pmac_ide[idx].timings[1];
else
timings = &pmac_ide[idx].timings[0];
- cycleTime = udma_timings[feature & 0xf].cycleTime;
- accessTime = udma_timings[feature & 0xf].accessTime;
-
- rdyToPauseTicks = SYSCLK_TICKS_UDMA(accessTime * 1000);
- cycleTicks = SYSCLK_TICKS_UDMA(cycleTime * 1000);
-
- *timings = ((*timings) & 0xe00fffff) |
- ((cycleTicks << 1) | (rdyToPauseTicks << 5) | 1) << 20;
+ set_timings_udma(timings, feature);
drive->current_speed = feature;
return 1;
}
-static int
+static int __pmac
pmac_ide_check_dma(ide_drive_t *drive)
{
int ata4, udma, idx;
@@ -944,21 +1302,20 @@
enable = 0;
udma = 0;
- ata4 = (pmac_ide[idx].kind == controller_kl_ata4);
+ ata4 = (pmac_ide[idx].kind == controller_kl_ata4 ||
+ pmac_ide[idx].kind == controller_kl_ata4_80);
if(enable) {
if (ata4 && (drive->type == ATA_DISK) &&
- (id->field_valid & 0x0004) && (id->dma_ultra & 0x17)) {
+ (id->field_valid & 0x0004) && (id->dma_ultra & 0x1f)) {
/* UltraDMA modes. */
- drive->using_dma = pmac_ide_udma_enable(drive, idx);
+ drive->using_dma = pmac_ide_udma_enable(drive, idx,
+ pmac_ide[idx].kind == controller_kl_ata4_80);
}
if (!drive->using_dma && (id->dma_mword & 0x0007)) {
/* Normal MultiWord DMA modes. */
drive->using_dma = pmac_ide_mdma_enable(drive, idx);
}
- /* Without this, strange things will happen on Keylargo-based
- * machines
- */
OUT_BYTE(0, IDE_CONTROL_REG);
/* Apply settings to controller */
pmac_ide_selectproc(drive);
@@ -966,11 +1323,26 @@
return 0;
}
+static void ide_toggle_bounce(ide_drive_t *drive, int on)
+{
+ dma64_addr_t addr = BLK_BOUNCE_HIGH;
+
+ if (on && drive->type == ATA_DISK && HWIF(drive)->highmem) {
+ if (!PCI_DMA_BUS_IS_PHYS)
+ addr = BLK_BOUNCE_ANY;
+ else
+ addr = HWIF(drive)->pci_dev->dma_mask;
+ }
+
+ blk_queue_bounce_limit(&drive->queue, addr);
+}
+
int pmac_ide_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
- int ix, dstat, i;
+ int ix, dstat, reading, ata4;
volatile struct dbdma_regs *dma;
-
+ byte unit = (drive->select.b.unit & 0x01);
+
/* Can we stuff a pointer to our intf structure in config_data
* or select_data in hwif ?
*/
@@ -978,59 +1350,106 @@
if (ix < 0)
return 0;
dma = pmac_ide[ix].dma_regs;
-
+ ata4 = (pmac_ide[ix].kind == controller_kl_ata4 ||
+ pmac_ide[ix].kind == controller_kl_ata4_80);
+
switch (func) {
case ide_dma_off:
printk(KERN_INFO "%s: DMA disabled\n", drive->name);
case ide_dma_off_quietly:
drive->using_dma = 0;
+ ide_toggle_bounce(drive, 0);
break;
case ide_dma_on:
case ide_dma_check:
+ /* Change this to better match ide-dma.c */
pmac_ide_check_dma(drive);
+ ide_toggle_bounce(drive, drive->using_dma);
break;
case ide_dma_read:
case ide_dma_write:
- if (!pmac_ide_build_dmatable(drive, ix, func==ide_dma_write))
+ /* this almost certainly isn't needed since we don't
+ appear to have a rwproc */
+ if (HWIF(drive)->rwproc)
+ HWIF(drive)->rwproc(drive, func);
+ reading = (func == ide_dma_read);
+ if (!pmac_ide_build_dmatable(drive, ix, !reading))
return 1;
+ /* Apple adds 60ns to wrDataSetup on reads */
+ if (ata4 && (pmac_ide[ix].timings[unit] & TR_66_UDMA_EN)) {
+ out_le32((unsigned *)(IDE_DATA_REG + IDE_TIMING_CONFIG + _IO_BASE),
+ pmac_ide[ix].timings[unit] +
+ ((func == ide_dma_read) ? 0x00800000UL : 0));
+ (void)in_le32((unsigned *)(IDE_DATA_REG + IDE_TIMING_CONFIG + _IO_BASE));
+ }
drive->waiting_for_dma = 1;
if (drive->type != ATA_DISK)
return 0;
BUG_ON(HWGROUP(drive)->handler);
ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
- OUT_BYTE(func==ide_dma_write? WIN_WRITEDMA: WIN_READDMA,
- IDE_COMMAND_REG);
+ if ((HWGROUP(drive)->rq->flags & REQ_DRIVE_TASKFILE) &&
+ (drive->addressing == 1)) {
+ ide_task_t *args = HWGROUP(drive)->rq->special;
+ OUT_BYTE(args->taskfile.command, IDE_COMMAND_REG);
+ } else if (drive->addressing) {
+ OUT_BYTE(reading ? WIN_READDMA_EXT : WIN_WRITEDMA_EXT, IDE_COMMAND_REG);
+ } else {
+ OUT_BYTE(reading ? WIN_READDMA : WIN_WRITEDMA, IDE_COMMAND_REG);
+ }
+ /* fall through */
case ide_dma_begin:
out_le32(&dma->control, (RUN << 16) | RUN);
+ /* Make sure it gets to the controller right now */
+ (void)in_le32(&dma->control);
break;
- case ide_dma_end:
+ case ide_dma_end: /* returns 1 on error, 0 otherwise */
drive->waiting_for_dma = 0;
dstat = in_le32(&dma->status);
out_le32(&dma->control, ((RUN|WAKE|DEAD) << 16));
+ pmac_ide_destroy_dmatable(drive, ix);
/* verify good dma status */
return (dstat & (RUN|DEAD|ACTIVE)) != RUN;
- case ide_dma_test_irq:
- if ((in_le32(&dma->status) & (RUN|ACTIVE)) == RUN)
- return 1;
- /* That's a bit ugly and dangerous, but works in our case
- * to workaround a problem with the channel status staying
- * active if the drive returns an error
+ case ide_dma_test_irq: /* returns 1 if dma irq issued, 0 otherwise */
+ /* We have to things to deal with here:
+ *
+ * - The dbdma won't stop if the command was started
+ * but completed with an error without transfering all
+ * datas. This happens when bad blocks are met during
+ * a multi-block transfer.
+ *
+ * - The dbdma fifo hasn't yet finished flushing to
+ * to system memory when the disk interrupt occurs.
+ *
+ * The trick here is to increment drive->waiting_for_dma,
+ * and return as if no interrupt occured. If the counter
+ * reach a certain timeout value, we then return 1. If
+ * we really got the interrupt, it will happen right away
+ * again.
+ * Apple's solution here may be more elegant. They issue
+ * a DMA channel interrupt (a separate irq line) via a DBDMA
+ * NOP command just before the STOP, and wait for both the
+ * disk and DBDMA interrupts to have completed.
*/
- if (IDE_CONTROL_REG) {
- byte stat;
- stat = GET_ALTSTAT();
- if (stat & ERR_STAT)
- return 1;
- }
- /* In some edge cases, some datas may still be in the dbdma
- * engine fifo, we wait a bit for dbdma to complete
+
+ /* If ACTIVE is cleared, the STOP command have passed and
+ * transfer is complete.
*/
- while ((in_le32(&dma->status) & (RUN|ACTIVE)) != RUN) {
- if (++i > 100)
- return 0;
- udelay(1);
+ if (!(in_le32(&dma->status) & ACTIVE))
+ return 1;
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "ide%d, ide_dma_test_irq \
+ called while not waiting\n", ix);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set */
+ drive->waiting_for_dma++;
+ if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
+ printk(KERN_WARNING "ide%d, timeout waiting \
+ for dbdma command stop\n", ix);
+ return 1;
}
- return 1;
+ udelay(1);
+ return 0;
/* Let's implement tose just in case someone wants them */
case ide_dma_bad_drive:
@@ -1051,7 +1470,6 @@
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-#ifdef CONFIG_PMAC_PBOOK
static void idepmac_sleep_device(ide_drive_t *drive, int i, unsigned base)
{
int j;
@@ -1062,7 +1480,9 @@
switch (drive->type) {
case ATA_DISK:
/* Spin down the drive */
- outb(0xa0, base+0x60);
+ outb(drive->select.all, base+0x60);
+ (void)inb(base+0x60);
+ udelay(100);
outb(0x0, base+0x30);
outb(0x0, base+0x20);
outb(0x0, base+0x40);
@@ -1086,19 +1506,21 @@
}
}
-static void idepmac_wake_device(ide_drive_t *drive, int used_dma)
- {
+#ifdef CONFIG_PMAC_PBOOK
+static void __pmac
+idepmac_wake_device(ide_drive_t *drive, int used_dma)
+{
/* We force the IDE subdriver to check for a media change
* This must be done first or we may lost the condition
*
* Problem: This can schedule. I moved the block device
* wakeup almost late by priority because of that.
*/
- if (DRIVER(drive) && DRIVER(drive)->media_change)
- DRIVER(drive)->media_change(drive);
+ if (drive->driver != NULL && ata_ops(drive)->check_media_change)
+ ata_ops(drive)->check_media_change(drive);
/* We kick the VFS too (see fix in ide.c revalidate) */
- check_disk_change(MKDEV(drive->channel->major, (drive->select.b.unit) << PARTN_BITS));
+ check_disk_change(mk_kdev(drive->channel->major, (drive->select.b.unit) << PARTN_BITS));
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
/* We re-enable DMA on the drive if it was active. */
@@ -1108,15 +1530,16 @@
*/
if (used_dma && !ide_spin_wait_hwgroup(drive)) {
/* Lock HW group */
- HWGROUP(drive)->busy = 1;
+ set_bit(IDE_BUSY, &HWGROUP(drive)->flags);
pmac_ide_check_dma(drive);
- HWGROUP(drive)->busy = 0;
+ clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
spin_unlock_irq(&ide_lock);
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
}
-static void idepmac_sleep_interface(int i, unsigned base, int mediabay)
+static void __pmac
+idepmac_sleep_interface(int i, unsigned base, int mediabay)
{
struct device_node* np = pmac_ide[i].node;
@@ -1128,73 +1551,81 @@
if (mediabay)
return;
- /* Disable and reset the bus */
- feature_set(np, FEATURE_IDE0_reset);
- feature_clear(np, FEATURE_IDE0_enable);
- switch(pmac_ide[i].aapl_bus_id) {
- case 0:
- feature_set(np, FEATURE_IDE0_reset);
- feature_clear(np, FEATURE_IDE0_enable);
- break;
- case 1:
- feature_set(np, FEATURE_IDE1_reset);
- feature_clear(np, FEATURE_IDE1_enable);
- break;
- case 2:
- feature_set(np, FEATURE_IDE2_reset);
- break;
- }
+ /* Disable the bus */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmac_ide[i].aapl_bus_id, 0);
}
-static void idepmac_wake_interface(int i, unsigned long base, int mediabay)
+static void __pmac
+idepmac_wake_interface(int i, unsigned long base, int mediabay)
{
struct device_node* np = pmac_ide[i].node;
if (!mediabay) {
/* Revive IDE disk and controller */
- switch(pmac_ide[i].aapl_bus_id) {
- case 0:
- feature_set(np, FEATURE_IDE0_reset);
- feature_set(np, FEATURE_IOBUS_enable);
- mdelay(10);
- feature_set(np, FEATURE_IDE0_enable);
- mdelay(10);
- feature_clear(np, FEATURE_IDE0_reset);
- break;
- case 1:
- feature_set(np, FEATURE_IDE1_reset);
- feature_set(np, FEATURE_IOBUS_enable);
- mdelay(10);
- feature_set(np, FEATURE_IDE1_enable);
- mdelay(10);
- feature_clear(np, FEATURE_IDE1_reset);
- break;
- case 2:
- /* This one exists only for KL, I don't know
- about any enable bit */
- feature_set(np, FEATURE_IDE2_reset);
- mdelay(10);
- feature_clear(np, FEATURE_IDE2_reset);
- break;
- }
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmac_ide[i].aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmac_ide[i].aapl_bus_id, 1);
+ mdelay(10);
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmac_ide[i].aapl_bus_id, 0);
}
+}
+
+static void
+idepmac_sleep_drive(ide_drive_t *drive, int idx, unsigned long base)
+{
+ /* Wait for HW group to complete operations */
+ if (ide_spin_wait_hwgroup(drive))
+ // What can we do here ? Wake drive we had already
+ // put to sleep and return an error ?
+ return;
+ else {
+ /* Lock HW group */
+ set_bit(IDE_BUSY, &HWGROUP(drive)->flags);
+ /* Stop the device */
+ idepmac_sleep_device(drive, idx, base);
+ spin_unlock_irq(&ide_lock);
+ }
+}
+
+static void
+idepmac_wake_drive(ide_drive_t *drive, unsigned long base)
+{
+ int j;
/* Reset timings */
- pmac_ide_selectproc(&ide_hwifs[i].drives[0]);
+ pmac_ide_selectproc(drive);
mdelay(10);
+
+ /* Wait up to 20 seconds for the drive to be ready */
+ for (j = 0; j < 200; j++) {
+ int status;
+ mdelay(100);
+ outb(drive->select.all, base + 0x60);
+ if (inb(base + 0x60) != drive->select.all)
+ continue;
+ status = inb(base + 0x70);
+ if (!(status & BUSY_STAT))
+ break;
+ }
+
+ /* We resume processing on the HW group */
+ spin_lock_irq(&ide_lock);
+ clear_bit(IDE_BUSY, &HWGROUP(drive)->flags);
+ if (!list_empty(&drive->queue.queue_head))
+ do_ide_request(&drive->queue);
+ spin_unlock_irq(&ide_lock);
}
/* Note: We support only master drives for now. This will have to be
* improved if we want to handle sleep on the iMacDV where the CD-ROM
* is a slave
*/
-static int idepmac_notify_sleep(struct pmu_sleep_notifier *self, int when)
+static int __pmac
+idepmac_notify_sleep(struct pmu_sleep_notifier *self, int when)
{
int i, ret;
unsigned long base;
- unsigned long flags;
int big_delay;
-
+
switch (when) {
case PBOOK_SLEEP_REQUEST:
break;
@@ -1203,34 +1634,19 @@
case PBOOK_SLEEP_NOW:
for (i = 0; i < pmac_ide_count; ++i) {
struct ata_channel *hwif;
- ide_drive_t *drive;
- int unlock = 0;
+ int dn;
if ((base = pmac_ide[i].regbase) == 0)
- continue;
+ continue;
hwif = &ide_hwifs[i];
- drive = &hwif->drives[0];
-
- if (drive->present) {
- /* Wait for HW group to complete operations */
- if (ide_spin_wait_hwgroup(drive)) {
- // What can we do here ? Wake drive we had already
- // put to sleep and return an error ?
- } else {
- unlock = 1;
- /* Lock HW group */
- HWGROUP(drive)->busy = 1;
-
- /* Stop the device */
- idepmac_sleep_device(drive, i, base);
-
- }
+ for (dn=0; dn<MAX_DRIVES; dn++) {
+ if (!hwif->drives[dn].present)
+ continue;
+ idepmac_sleep_drive(&hwif->drives[dn], i, base);
}
/* Disable irq during sleep */
disable_irq(pmac_ide[i].irq);
- if (unlock)
- spin_unlock_irq(&ide_lock);
/* Check if this is a media bay with an IDE device or not
* a media bay.
@@ -1247,6 +1663,9 @@
if ((base = pmac_ide[i].regbase) == 0)
continue;
+ /* Make sure we have sane timings */
+ sanitize_timings(i);
+
/* Check if this is a media bay with an IDE device or not
* a media bay
*/
@@ -1263,43 +1682,29 @@
for (i = 0; i < pmac_ide_count; ++i) {
struct ata_channel *hwif;
- ide_drive_t *drive;
- int j, used_dma;
+ int used_dma, dn;
+ int irq_on = 0;
if ((base = pmac_ide[i].regbase) == 0)
continue;
hwif = &ide_hwifs[i];
- drive = &hwif->drives[0];
-
- /* Wait for the drive to come up and set it's DMA */
- if (drive->present) {
- /* Wait up to 20 seconds */
- for (j = 0; j < 200; j++) {
- int status;
- mdelay(100);
- status = inb(base + 0x70);
- if (!(status & BUSY_STAT))
- break;
+ for (dn=0; dn<MAX_DRIVES; dn++) {
+ ide_drive_t *drive = &hwif->drives[dn];
+ if (!drive->present)
+ continue;
+ /* We don't have re-configured DMA yet */
+ used_dma = drive->using_dma;
+ drive->using_dma = 0;
+ idepmac_wake_drive(drive, base);
+ if (!irq_on) {
+ enable_irq(pmac_ide[i].irq);
+ irq_on = 1;
}
- }
-
- /* We don't have re-configured DMA yet */
- used_dma = drive->using_dma;
- drive->using_dma = 0;
-
- /* We resume processing on the HW group */
- spin_lock_irqsave(&ide_lock, flags);
- enable_irq(pmac_ide[i].irq);
- if (drive->present)
- HWGROUP(drive)->busy = 0;
- spin_unlock_irqrestore(&ide_lock, flags);
-
- /* Wake the device
- * We could handle the slave here
- */
- if (drive->present)
idepmac_wake_device(drive, used_dma);
+ }
+ if (!irq_on)
+ enable_irq(pmac_ide[i].irq);
}
break;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/