when doing 'make menuconfig' i got this:
*************************************************
[arts@DragonRider uClinux-2.4.x]$ make menuconfig > error.txt 2>
error2.txt
rm -f include/asm-arm/arch include/asm-arm/proc
(cd include/asm-arm; ln -sf arch- arch; ln -sf proc- proc)
rm -f include/asm
( cd include ; ln -sf asm-arm asm)
make -C scripts/lxdialog all
make[1]: Entering directory
`/home/arts/academique/memoire/kernel/uClinux-2.4.x/scripts/lxdialog'
make[1]: Leaving directory
`/home/arts/academique/memoire/kernel/uClinux-2.4.x/scripts/lxdialog'
/bin/sh scripts/Menuconfig arch/arm/config.in
Using defaults found in arch/arm/defconfig
Preparing scripts: functions,
parsing.......................................................................done.
[H[2J
Menuconfig has encountered a possible error in one of the kernel's
configuration files and is unable to continue. Here is the error
report:
Q> scripts/Menuconfig: MCmenu0: command not found
Please report this to the maintainer <mec@shout.net>. You may also
send a problem report to <linux-kernel@vger.kernel.org>.
Please indicate the kernel version you are trying to configure and
which menu you were trying to enter when this error occurred.
scripts/Menuconfig: ./MCmenu0: line 62: syntax error near unexpected
token `fi'
scripts/Menuconfig: ./MCmenu0: line 62: `fi'
make: *** [menuconfig] Error 1
******************************************************
when doing "make xconfig" i got that:
******************************************************
[arts@DragonRider uClinux-2.4.x]$ make xconfig
rm -f include/asm-arm/arch include/asm-arm/proc
(cd include/asm-arm; ln -sf arch- arch; ln -sf proc- proc)
rm -f include/asm
( cd include ; ln -sf asm-arm asm)
make -C scripts kconfig.tk
make[1]: Entering directory
`/home/arts/academique/memoire/kernel/uClinux-2.4.x/scripts'
unset GCC_EXEC_PREFIX; gcc -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -c -o tkparse.o tkparse.c
unset GCC_EXEC_PREFIX; gcc -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -c -o tkcond.o tkcond.c
unset GCC_EXEC_PREFIX; gcc -Wall -Wstrict-prototypes -O2
-fomit-frame-pointer -c -o tkgen.o tkgen.c
unset GCC_EXEC_PREFIX; gcc -o tkparse tkparse.o tkcond.o tkgen.o
cat header.tk >> ./kconfig.tk
./tkparse < ../arch/arm/config.in >> kconfig.tk
-: 496: unable to open drivers/ssi/Config.in
make[1]: *** [kconfig.tk] Error 1
make[1]: Leaving directory
`/home/arts/academique/memoire/kernel/uClinux-2.4.x/scripts'
make: *** [xconfig] Error 2
[arts@DragonRider uClinux-2.4.x]$
********************************************************
when doing "make config" i got this:
*******************************************************
[arts@DragonRider uClinux-2.4.x]$ make config
rm -f include/asm-arm/arch include/asm-arm/proc
(cd include/asm-arm; ln -sf arch- arch; ln -sf proc- proc)
rm -f include/asm
( cd include ; ln -sf asm-arm asm)
/bin/sh scripts/Configure arch/arm/config.in
#
# Using defaults found in arch/arm/defconfig
#
*
* Code maturity level options
*
Prompt for development and/or incomplete code/drivers
(CONFIG_EXPERIMENTAL) [Y/n/?] n
Prompt for obsolete code/drivers (CONFIG_OBSOLETE) [N/y/?] n
*
* Loadable module support
*
Enable loadable module support (CONFIG_MODULES) [N/y/?] n
*
* System Type
*
ARM system type (Anakin, Archimedes/A5000, Cirrus-CL-PS7500FE,
CLPS711x/EP721x-based, Co-EBSA285, EBSA
-110, Epxa10db, FootBridge, Integrator, LinkUp-L7200, RiscPC,
SA1100-based, Shark) [Integrator] EP721x
-based
defined CONFIG_ARCH_CLPS711X
*
* Archimedes/A5000 Implementations
*
*
* Archimedes/A5000 Implementations (select only ONE)
*
*
* Footbridge Implementations
*
*
* SA11x0 Implementations
*
*
* CLPS711X/EP721X Implementations
*
CDB89712 (CONFIG_ARCH_CDB89712) [N/y/?] (NEW) n
CLEP7312 (CONFIG_ARCH_CLEP7312) [N/y/?] (NEW) n
EDB7211 (CONFIG_ARCH_EDB7211) [N/y/?] (NEW) y
P720T (CONFIG_ARCH_P720T) [N/y/?] (NEW) n
EP72xx ROM boot (CONFIG_EP72XX_ROM_BOOT) [N/y/?] (NEW) n
*
* Processor Type
*
*
* General setup
*
Support hot-pluggable devices (CONFIG_HOTPLUG) [N/y/?] n
Networking support (CONFIG_NET) [Y/n/?] n
System V IPC (CONFIG_SYSVIPC) [Y/n/?] y
BSD Process Accounting (CONFIG_BSD_PROCESS_ACCT) [N/y/?]
Sysctl support (CONFIG_SYSCTL) [Y/n/?] n
*
* At least one math emulation must be selected
*
NWFPE math emulation (CONFIG_FPE_NWFPE) [N/y/?] (NEW)
Kernel core (/proc/kcore) format (ELF, A.OUT) [ELF]
defined CONFIG_KCORE_ELF
Kernel support for MISC binaries (CONFIG_BINFMT_MISC) [N/y/?] n
RISC OS personality (CONFIG_ARTHUR) [N/y/?]
Kernel-mode alignment trap handler (CONFIG_ALIGNMENT_TRAP) [Y/n/?]
*
* Parallel port support
*
Parallel port support (CONFIG_PARPORT) [N/y/?] n
*
* Memory Technology Devices (MTD)
*
Memory Technology Device (MTD) support (CONFIG_MTD) [Y/n/?] n
*
* Plug and Play configuration
*
Plug and Play support (CONFIG_PNP) [N/y/?] n
*
* Block devices
*
Normal PC floppy disk support (CONFIG_BLK_DEV_FD) [N/y/?] n
XT hard disk support (CONFIG_BLK_DEV_XD) [N/y/?] n
Loopback device support (CONFIG_BLK_DEV_LOOP) [N/y/?] n
RAM disk support (CONFIG_BLK_DEV_RAM) [Y/n/?] y
Default RAM disk size (CONFIG_BLK_DEV_RAM_SIZE) [4096] 1024
Initial RAM disk (initrd) support (CONFIG_BLK_DEV_INITRD) [N/y/?]
ROM disk memory block device (blkmem) (CONFIG_BLK_DEV_BLKMEM) [N/y/?]
(NEW) n
*
* ATA/IDE/MFM/RLL support
*
ATA/IDE/MFM/RLL support (CONFIG_IDE) [N/y/?] n
*
* SCSI support
*
SCSI support? (CONFIG_SCSI) [N/y/?] n
scripts/Configure: drivers/ssi/Config.in: Aucun fichier ou répertoire de
ce type
make: *** [config] Error 1
[arts@DragonRider uClinux-2.4.x]$
*****************************************************
It seems to be the kernel 2.4.17
I assume the bad menu is the scsi menu (see "make config")
I'm using uClinux-2.4 (cvs.uclinux.org) with the "arm-elf-" tools
(http://www.uclinux.org/pub/uClinux/m68k-elf-tools/arm-elf-tools-20011219.tar.gz)
I'm trying to compile a linux kernel to an EP7211 chip (ARM720T
processor) target on a i386 host.
I include the top Makefile in this e-mail.
Tell me if any question.
Thanks for your help.
Arts Thibaut INFO23
www.student.info.ucl.ac.be
--------------111502F85352396852C6BCB5
Content-Type: text/plain; charset=us-ascii;
name="Makefile"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="Makefile"
VERSION = 2
PATCHLEVEL = 4
SUBLEVEL = 17
EXTRAVERSION = -uc0
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
ARCH := arm
# ARCH := m68knommu
#ifndef ARCH
#ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
#endif
KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//")
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
TOPDIR := $(shell /bin/pwd)
HPATH = $(TOPDIR)/include
FINDHPATH = $(HPATH)/asm $(HPATH)/linux $(HPATH)/scsi $(HPATH)/net
HOSTCC = unset GCC_EXEC_PREFIX; gcc
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
# CROSS_COMPILE = m68k-elf-
CROSS_COMPILE = arm-elf-
#
# Include the make variables (CC, etc...)
#
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
MAKEFILES = $(TOPDIR)/.config
GENKSYMS = /sbin/genksyms
DEPMOD = /sbin/depmod
MODFLAGS = -DMODULE
CFLAGS_KERNEL =
PERL = perl
export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION KERNELRELEASE ARCH \
CONFIG_SHELL TOPDIR HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE MAKEFILES GENKSYMS MODFLAGS PERL
.PHONY: dummy
all: do-it-all
#
# Make "config" the default target if there is no configuration file or
# "depend" the target if there is no top-level dependency information.
#
ifeq (.config,$(wildcard .config))
include .config
ifeq (.depend,$(wildcard .depend))
include .depend
ifndef CONFIG_UCLINUX
LINUX=vmlinux
else
LINUX=linux
endif
do-it-all: Version $(LINUX)
else
CONFIGURATION = depend
do-it-all: depend
endif
else
CONFIGURATION = config
do-it-all: config
endif
#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Uncomment if you want to place them anywhere other than root.
#
#export INSTALL_PATH=/boot
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
# makefile but the arguement can be passed to make if needed.
#
MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
#
# standard CFLAGS
#
CPPFLAGS := -D__KERNEL__ -I$(HPATH)
ifndef CONFIG_FULLDEBUG
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O2 \
-fomit-frame-pointer -fno-strict-aliasing -fno-common
else
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -Wno-trigraphs -O1 \
-g -fno-strict-aliasing
endif
AFLAGS := -D__ASSEMBLY__ $(CPPFLAGS)
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
# This is i386 specific.
#
export ROOT_DEV = CURRENT
#
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
# This is i386 specific.
#
export SVGA_MODE = -DSVGA_MODE=NORMAL_VGA
#
# If you want the RAM disk device, define this to be the size in blocks.
# This is i386 specific.
#
#export RAMDISK = -DRAMDISK=512
ifndef CONFIG_UCLINUX
CORE_FILES =kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o
NETWORKS =net/network.o
LIBS =$(TOPDIR)/lib/lib.a
SUBDIRS =kernel drivers mm fs net ipc lib
else # CONFIG_UCLINUX
CORE_FILES =kernel/kernel.o mmnommu/mmnommu.o fs/fs.o ipc/ipc.o
NETWORKS =net/network.o
LIBS =$(TOPDIR)/lib/lib.a
SUBDIRS =kernel drivers mmnommu fs net ipc lib
endif # CONFIG_UCLINUX
DRIVERS-n :=
DRIVERS-y :=
DRIVERS-m :=
DRIVERS- :=
DRIVERS-$(CONFIG_ACPI) += drivers/acpi/acpi.o
DRIVERS-$(CONFIG_PARPORT) += drivers/parport/driver.o
DRIVERS-y += drivers/char/char.o \
drivers/block/block.o \
drivers/misc/misc.o \
drivers/net/net.o \
drivers/media/media.o
DRIVERS-$(CONFIG_AGP) += drivers/char/agp/agp.o
DRIVERS-$(CONFIG_DRM) += drivers/char/drm/drm.o
DRIVERS-$(CONFIG_NUBUS) += drivers/nubus/nubus.a
DRIVERS-$(CONFIG_ISDN) += drivers/isdn/isdn.a
DRIVERS-$(CONFIG_NET_FC) += drivers/net/fc/fc.o
DRIVERS-$(CONFIG_APPLETALK) += drivers/net/appletalk/appletalk.o
DRIVERS-$(CONFIG_TR) += drivers/net/tokenring/tr.o
DRIVERS-$(CONFIG_WAN) += drivers/net/wan/wan.o
DRIVERS-$(CONFIG_ARCNET) += drivers/net/arcnet/arcnetdrv.o
DRIVERS-$(CONFIG_ATM) += drivers/atm/atm.o
DRIVERS-$(CONFIG_IDE) += drivers/ide/idedriver.o
DRIVERS-$(CONFIG_FC4) += drivers/fc4/fc4.a
DRIVERS-$(CONFIG_SCSI) += drivers/scsi/scsidrv.o
DRIVERS-$(CONFIG_FUSION_BOOT) += drivers/message/fusion/fusion.o
DRIVERS-$(CONFIG_IEEE1394) += drivers/ieee1394/ieee1394drv.o
ifneq ($(CONFIG_CD_NO_IDESCSI)$(CONFIG_BLK_DEV_IDECD)$(CONFIG_BLK_DEV_SR)$(CONFIG_PARIDE_PCD),)
DRIVERS-y += drivers/cdrom/driver.o
endif
DRIVERS-$(CONFIG_SSI) += drivers/ssi/ssi.o
DRIVERS-$(CONFIG_SOUND) += drivers/sound/sounddrivers.o
DRIVERS-$(CONFIG_PCI) += drivers/pci/driver.o
DRIVERS-$(CONFIG_MTD) += drivers/mtd/mtdlink.o
DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o
DRIVERS-$(CONFIG_NET_PCMCIA) += drivers/net/pcmcia/pcmcia_net.o
DRIVERS-$(CONFIG_NET_WIRELESS) += drivers/net/wireless/wireless_net.o
DRIVERS-$(CONFIG_PCMCIA_CHRDEV) += drivers/char/pcmcia/pcmcia_char.o
DRIVERS-$(CONFIG_DIO) += drivers/dio/dio.a
DRIVERS-$(CONFIG_SBUS) += drivers/sbus/sbus_all.o
DRIVERS-$(CONFIG_ZORRO) += drivers/zorro/driver.o
DRIVERS-$(CONFIG_FC4) += drivers/fc4/fc4.a
DRIVERS-$(CONFIG_ALL_PPC) += drivers/macintosh/macintosh.o
DRIVERS-$(CONFIG_MAC) += drivers/macintosh/macintosh.o
DRIVERS-$(CONFIG_ISAPNP) += drivers/pnp/pnp.o
DRIVERS-$(CONFIG_SGI_IP22) += drivers/sgi/sgi.a
DRIVERS-$(CONFIG_VT) += drivers/video/video.o
DRIVERS-$(CONFIG_PARIDE) += drivers/block/paride/paride.a
DRIVERS-$(CONFIG_HAMRADIO) += drivers/net/hamradio/hamradio.o
DRIVERS-$(CONFIG_TC) += drivers/tc/tc.a
DRIVERS-$(CONFIG_USB) += drivers/usb/usbdrv.o
DRIVERS-$(CONFIG_INPUT) += drivers/input/inputdrv.o
DRIVERS-$(CONFIG_I2O) += drivers/message/i2o/i2o.o
DRIVERS-$(CONFIG_IRDA) += drivers/net/irda/irda.o
DRIVERS-$(CONFIG_I2C) += drivers/i2c/i2c.o
DRIVERS-$(CONFIG_PHONE) += drivers/telephony/telephony.o
DRIVERS-$(CONFIG_MD) += drivers/md/mddev.o
DRIVERS-$(CONFIG_BLUEZ) += drivers/bluetooth/bluetooth.o
DRIVERS-$(CONFIG_HOTPLUG_PCI) += drivers/hotplug/vmlinux-obj.o
DRIVERS := $(DRIVERS-y)
# files removed with 'make clean'
CLEAN_FILES = \
kernel/ksyms.lst include/linux/compile.h \
$(LINUX) System.map \
.tmp* \
drivers/char/consolemap_deftbl.c drivers/video/promcon_tbl.c \
drivers/char/conmakehash \
drivers/char/drm/*-mod.c \
drivers/pci/devlist.h drivers/pci/classlist.h drivers/pci/gen-devlist \
drivers/zorro/devlist.h drivers/zorro/gen-devlist \
drivers/sound/bin2hex drivers/sound/hex2hex \
drivers/atm/fore200e_mkfirm drivers/atm/{pca,sba}*{.bin,.bin1,.bin2} \
drivers/scsi/aic7xxx/aicasm/aicasm_gram.c \
drivers/scsi/aic7xxx/aicasm/aicasm_scan.c \
drivers/scsi/aic7xxx/aicasm/y.tab.h \
drivers/scsi/aic7xxx/aicasm/aicasm \
drivers/scsi/53c700-mem.c \
net/khttpd/make_times_h \
net/khttpd/times.h \
submenu*
# directories removed with 'make clean'
CLEAN_DIRS = \
modules
# files removed with 'make mrproper'
MRPROPER_FILES = \
include/linux/autoconf.h include/linux/version.h \
drivers/net/hamradio/soundmodem/sm_tbl_{afsk1200,afsk2666,fsk9600}.h \
drivers/net/hamradio/soundmodem/sm_tbl_{hapn4800,psk4800}.h \
drivers/net/hamradio/soundmodem/sm_tbl_{afsk2400_7,afsk2400_8}.h \
drivers/net/hamradio/soundmodem/gentbl \
drivers/sound/*_boot.h drivers/sound/.*.boot \
drivers/sound/msndinit.c \
drivers/sound/msndperm.c \
drivers/sound/pndsperm.c \
drivers/sound/pndspini.c \
drivers/atm/fore200e_*_fw.c drivers/atm/.fore200e_*.fw \
.version .config* config.in config.old \
scripts/tkparse scripts/kconfig.tk scripts/kconfig.tmp \
scripts/lxdialog/*.o scripts/lxdialog/lxdialog \
.menuconfig.log \
include/asm \
.hdepend scripts/mkdep scripts/split-include scripts/docproc \
$(TOPDIR)/include/linux/modversions.h \
kernel.spec
# directories removed with 'make mrproper'
MRPROPER_DIRS = \
include/config \
$(TOPDIR)/include/linux/modules
include arch/$(ARCH)/Makefile
export CPPFLAGS CFLAGS AFLAGS
export NETWORKS DRIVERS LIBS HEAD LDFLAGS LINKFLAGS MAKEBOOT ASFLAGS
Version: dummy
@rm -f include/linux/compile.h
boot: $(LINUX)
@$(MAKE) CFLAGS="$(CFLAGS) $(CFLAGS_KERNEL)" -C arch/$(ARCH)/boot
$(LINUX): include/linux/version.h $(CONFIGURATION) init/main.o init/version.o linuxsubdirs
$(LD) $(LINKFLAGS) $(HEAD) init/main.o init/version.o \
--start-group \
$(CORE_FILES) \
$(DRIVERS) \
$(NETWORKS) \
$(LIBS) \
--end-group \
-o $(LINUX)
$(NM) $(LINUX) | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | sort > System.map
symlinks:
rm -f include/asm
( cd include ; ln -sf asm-$(ARCH) asm)
@if [ ! -d include/linux/modules ]; then \
mkdir include/linux/modules; \
fi
oldconfig: symlinks
$(CONFIG_SHELL) scripts/Configure -d arch/$(ARCH)/config.in
xconfig: symlinks
$(MAKE) -C scripts kconfig.tk
wish -f scripts/kconfig.tk
menuconfig: include/linux/version.h symlinks
$(MAKE) -C scripts/lxdialog all
$(CONFIG_SHELL) scripts/Menuconfig arch/$(ARCH)/config.in
config: symlinks
$(CONFIG_SHELL) scripts/Configure arch/$(ARCH)/config.in
include/config/MARKER: scripts/split-include include/linux/autoconf.h
scripts/split-include include/linux/autoconf.h include/config
@ touch include/config/MARKER
linuxsubdirs: $(patsubst %, _dir_%, $(SUBDIRS))
$(patsubst %, _dir_%, $(SUBDIRS)) : dummy include/linux/version.h include/config/MARKER
$(MAKE) CFLAGS="$(CFLAGS) $(CFLAGS_KERNEL)" -C $(patsubst _dir_%, %, $@)
$(TOPDIR)/include/linux/version.h: include/linux/version.h
$(TOPDIR)/include/linux/compile.h: include/linux/compile.h
newversion:
. scripts/mkversion > .tmpversion
@mv -f .tmpversion .version
include/linux/compile.h: $(CONFIGURATION) include/linux/version.h newversion
@echo -n \#define UTS_VERSION \"\#`cat .version` > .ver
@if [ -n "$(CONFIG_SMP)" ] ; then echo -n " SMP" >> .ver; fi
@if [ -f .name ]; then echo -n \-`cat .name` >> .ver; fi
@echo ' '`date`'"' >> .ver
@echo \#define LINUX_COMPILE_TIME \"`date +%T`\" >> .ver
@echo \#define LINUX_COMPILE_BY \"`whoami`\" >> .ver
@echo \#define LINUX_COMPILE_HOST \"`hostname`\" >> .ver
@if [ -x /bin/dnsdomainname ]; then \
echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname`\"; \
elif [ -x /bin/domainname ]; then \
echo \#define LINUX_COMPILE_DOMAIN \"`domainname`\"; \
else \
echo \#define LINUX_COMPILE_DOMAIN ; \
fi >> .ver
@echo \#define LINUX_COMPILER \"`$(CC) $(CFLAGS) -v 2>&1 | tail -1`\" >> .ver
@mv -f .ver $@
include/linux/version.h: ./Makefile
@echo \#define UTS_RELEASE \"$(KERNELRELEASE)\" > .ver
@echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)` >> .ver
@echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))' >>.ver
@mv -f .ver $@
init/version.o: init/version.c include/linux/compile.h include/config/MARKER
$(CC) $(CFLAGS) $(CFLAGS_KERNEL) -DUTS_MACHINE='"$(ARCH)"' -c -o init/version.o init/version.c
init/main.o: init/main.c include/config/MARKER
$(CC) $(CFLAGS) $(CFLAGS_KERNEL) $(PROFILING) -c -o $*.o $<
fs lib mm ipc kernel drivers net: dummy
$(MAKE) CFLAGS="$(CFLAGS) $(CFLAGS_KERNEL)" $(subst $@, _dir_$@, $@)
TAGS: dummy
etags `find include/asm-$(ARCH) -name '*.h'`
find include -type d \( -name "asm-*" -o -name config \) -prune -o -name '*.h' -print | xargs etags -a
find $(SUBDIRS) init -name '*.[ch]' | xargs etags -a
# Exuberant ctags works better with -I
tags: dummy
CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_NOVERS"`; \
ctags $$CTAGSF `find include/asm-$(ARCH) -name '*.h'` && \
find include -type d \( -name "asm-*" -o -name config \) -prune -o -name '*.h' -print | xargs ctags $$CTAGSF -a && \
find $(SUBDIRS) init -name '*.[ch]' | xargs ctags $$CTAGSF -a
ifdef CONFIG_MODULES
ifdef CONFIG_MODVERSIONS
MODFLAGS += -DMODVERSIONS -include $(HPATH)/linux/modversions.h
endif
.PHONY: modules
modules: $(patsubst %, _mod_%, $(SUBDIRS))
.PHONY: $(patsubst %, _mod_%, $(SUBDIRS))
$(patsubst %, _mod_%, $(SUBDIRS)) : include/linux/version.h include/config/MARKER
$(MAKE) -C $(patsubst _mod_%, %, $@) CFLAGS="$(CFLAGS) $(MODFLAGS)" MAKING_MODULES=1 modules
.PHONY: modules_install
modules_install: _modinst_ $(patsubst %, _modinst_%, $(SUBDIRS)) _modinst_post
.PHONY: _modinst_
ifeq ($(CONFIG_UCLINUX),y)
_modinst_:
else
_modinst_:
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/build
@mkdir -p $(MODLIB)/kernel
@ln -s $(TOPDIR) $(MODLIB)/build
endif
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
# vmlinux. This depmod is only for convenience to give the initial
# boot a modules.dep even before / is mounted read-write. However the
# boot script depmod is the master version.
ifeq "$(strip $(INSTALL_MOD_PATH))" ""
depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
.PHONY: _modinst_post
_modinst_post: _modinst_post_pcmcia
if [ -r System.map ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
# Backwards compatibilty symlinks for people still using old versions
# of pcmcia-cs with hard coded pathnames on insmod. Remove
# _modinst_post_pcmcia for kernel 2.4.1.
.PHONY: _modinst_post_pcmcia
_modinst_post_pcmcia:
cd $(MODLIB); \
mkdir -p pcmcia; \
find kernel -path '*/pcmcia/*' -name '*.o' | xargs -i -r ln -sf ../{} pcmcia
.PHONY: $(patsubst %, _modinst_%, $(SUBDIRS))
$(patsubst %, _modinst_%, $(SUBDIRS)) :
$(MAKE) -C $(patsubst _modinst_%, %, $@) modules_install
# modules disabled....
else
modules modules_install: dummy
@echo
@echo "The present kernel configuration has modules disabled."
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
@exit 1
endif
clean: archclean
find . \( -name '*.[oas]' -o -name core -o -name '.*.flags' \) -type f -print \
| grep -v lxdialog/ | xargs rm -f
rm -f $(CLEAN_FILES)
rm -rf $(CLEAN_DIRS)
$(MAKE) -C Documentation/DocBook clean
mrproper: clean archmrproper
find . \( -size 0 -o -name .depend \) -type f -print | xargs rm -f
rm -f $(MRPROPER_FILES)
rm -rf $(MRPROPER_DIRS)
$(MAKE) -C Documentation/DocBook mrproper
distclean: mrproper
rm -f core `find . \( -not -type d \) -and \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -type f -print` TAGS tags
backup: mrproper
cd .. && tar cf - linux/ | gzip -9 > backup.gz
sync
sgmldocs:
chmod 755 $(TOPDIR)/scripts/docgen
chmod 755 $(TOPDIR)/scripts/gen-all-syms
chmod 755 $(TOPDIR)/scripts/kernel-doc
$(MAKE) -C $(TOPDIR)/Documentation/DocBook books
psdocs: sgmldocs
$(MAKE) -C Documentation/DocBook ps
pdfdocs: sgmldocs
$(MAKE) -C Documentation/DocBook pdf
htmldocs: sgmldocs
$(MAKE) -C Documentation/DocBook html
sums:
find . -type f -print | sort | xargs sum > .SUMS
dep-files: scripts/mkdep archdep include/linux/version.h
scripts/mkdep -- init/*.c > .depend
scripts/mkdep -- `find $(FINDHPATH) -name SCCS -prune -o -follow -name \*.h ! -name modversions.h -print` > .hdepend
$(MAKE) $(patsubst %,_sfdep_%,$(SUBDIRS)) _FASTDEP_ALL_SUB_DIRS="$(SUBDIRS)"
ifdef CONFIG_MODVERSIONS
$(MAKE) update-modverfile
endif
ifdef CONFIG_MODVERSIONS
MODVERFILE := $(TOPDIR)/include/linux/modversions.h
else
MODVERFILE :=
endif
export MODVERFILE
depend dep: dep-files
checkconfig:
find * -name '*.[hcS]' -type f -print | sort | xargs $(PERL) -w scripts/checkconfig.pl
checkhelp:
find * -name [cC]onfig.in -print | sort | xargs $(PERL) -w scripts/checkhelp.pl
checkincludes:
find * -name '*.[hcS]' -type f -print | sort | xargs $(PERL) -w scripts/checkincludes.pl
ifdef CONFIGURATION
..$(CONFIGURATION):
@echo
@echo "You have a bad or nonexistent" .$(CONFIGURATION) ": running 'make" $(CONFIGURATION)"'"
@echo
$(MAKE) $(CONFIGURATION)
@echo
@echo "Successful. Try re-making (ignore the error that follows)"
@echo
exit 1
#dummy: ..$(CONFIGURATION)
dummy:
else
dummy:
endif
include Rules.make
#
# This generates dependencies for the .h files.
#
scripts/mkdep: scripts/mkdep.c
$(HOSTCC) $(HOSTCFLAGS) -o scripts/mkdep scripts/mkdep.c
scripts/split-include: scripts/split-include.c
$(HOSTCC) $(HOSTCFLAGS) -o scripts/split-include scripts/split-include.c
#
# RPM target
#
# If you do a make spec before packing the tarball you can rpm -ta it
#
spec:
. scripts/mkspec >kernel.spec
#
# Build a tar ball, generate an rpm from it and pack the result
# There arw two bits of magic here
# 1) The use of /. to avoid tar packing just the symlink
# 2) Removing the .dep files as they have source paths in them that
# will become invalid
#
rpm: clean spec
find . \( -size 0 -o -name .depend -o -name .hdepend \) -type f -print | xargs rm -f
set -e; \
cd $(TOPDIR)/.. ; \
ln -sf $(TOPDIR) $(KERNELPATH) ; \
tar -cvz --exclude CVS -f $(KERNELPATH).tar.gz $(KERNELPATH)/. ; \
rm $(KERNELPATH) ; \
cd $(TOPDIR) ; \
. scripts/mkversion > .version ; \
rpm -ta $(TOPDIR)/../$(KERNELPATH).tar.gz ; \
rm $(TOPDIR)/../$(KERNELPATH).tar.gz
--------------111502F85352396852C6BCB5--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/