Re: /dev/hd[ijkl] only using udma (not udma 100)

Simen Timian Thoresen (simentt@dolphinics.no)
Mon, 27 May 2002 15:07:48 +0200


> Hi,
>
> Ive got a machine running debian test dist and 2.4.18. The machine has two
> promise ata100 tx2 controller cards. My question is why does the devices
> hde to hdh use udma100 but devices hdi to hdl only use udma. Note on this
> is that the devices hdi to hdl did i have to make myself (dont know if
> there is some other configure possibility). All drives are the same model.

I'm basically observing the same thing - 5 drives connected alone on their own
ata100 channels (1 on a Via southbridge, 4 on HPT370 channels).

I'm seing speeds 33, 44, 66 and 69 as when examining /proc/ide/hdx/settings.
There are 2 differing types of drives, but all are ATA100 capable.

This is also with 2.4.18, originally slackware 7.1

-Simen

--
Simen Thoresen
http://www.dolphinics.no
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/