Re: [new release] Affix-1_00pre2 --- Bluetooth Protocol Stack. +

[Dmitry Kasatkin]

This is a multi-part message in MIME format.
--------------040500000108080004050602
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hi,

Small patch. Otherwise PCMCIA will not work (modules went to invalid 
place).

br, Dmitry

Kasatkin Dmitry (NRC/Helsinki) wrote:

>Hi All,
>
>Find new Affix release Affix-1_00pre2 on http://affix.sourceforge.net
>It has improved UART, USB and extra drivers.
>Anycom cards supported
>
>Version 1.0pre2 [31.05.2002]
>- [new] new drivers for *bluecard* cards (Anycom) and 3COM cards
>- [new] cross-compiling support (ARM, PowerPC,...)
>- [new] *open_uart* accept speed (no need to call stty)
>- [fix] affix_uart support Xircom cards
>- [changes] libbt*.so libs moved to libaffix*.so
>- [fix] now can be compiled on kernels <= 2.4.6
>
>
>Profiles supported:
>- Service Discovery.
>- Serial Port.
>- LAN Access.
>- Dialup Networking.
>- OBEX Object Push.
>- OBEX File Transfer.
>- PAN.
>
>
>GUI environment A.F.E - Affix Frontend Environment available for use.
>http://affix.sourceforge.net/afe
>
>Link can be found on Affix WEB site in *Links* section.
>
>br, Dmitry
>[phone]
>
>
>

-- 
 Dmitry Kasatkin
 Nokia Research Center / Helsinki
 Mobile: [phone]
 E-Mail: [e-mail]

--------------040500000108080004050602
Content-Type: text/plain;
 name="Affix-1_00pre2.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="Affix-1_00pre2.patch"

diff -Naur Affix-1_00pre2/Configure affix/Configure
--- Affix-1_00pre2/Configure	Sat Jun  1 03:07:45 2002
+++ affix/Configure	Mon Jun  3 13:48:41 2002
@@ -19,7 +19,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Configure,v 2.48 2002/06/01 00:07:45 kds Exp $
+#   $Id: Configure,v 2.50 2002/06/03 10:48:41 kds Exp $
 #
 #   Configuration script (adopted from PCMCIA package) 
 #   
@@ -403,19 +403,12 @@
 
 
 if [ "$CONFIG_MODVERSIONS" = "y" ] ; then
-    if [ $CONF_SRC != 1 ] ; then
 	MODVER="$LINUX/include/linux/$MODVER"
 	if [ ! -r "$MODVER" ] ; then
 	    echo "$MODVER does not exist!"
 	    echo "    To fix, run 'make dep' in $LINUX."
 	    fail
 	fi
-    else
-	# use running kernel
-	mv $MODVER include/affix
-	ln -sf ../../../include/affix/$MODVER ./kernel/include/linux/$MODVER
-	MODVER="$BTDIR/kernel/include/linux/$MODVER"
-    fi
 else
     rm -f $MODVER
 fi
@@ -474,6 +467,34 @@
 CPPFLAGS_KERNEL="$CPPFLAGS_KERNEL -D__KERNEL__ -DMODULE $MFLAG"
 LDFLAGS="${CROSS_LDFLAGS:-}"
 
+#=======================================================================
+
+# How should the startup scripts be configured?
+
+if [ "$PREFIX" = "" ] ; then
+    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
+	echo "It looks like you have a System V init file setup."
+	SYSV_INIT=y
+	if [ -d /sbin/init.d ] ; then
+	    RC_DIR=/sbin/init.d
+	elif [ -d /etc/rc.d/init.d ] ; then
+	    RC_DIR=/etc/rc.d
+	else
+	    RC_DIR=/etc
+	fi
+    else
+	echo "It looks like you have a BSD-ish init file setup."
+	SYSV_INIT=
+    fi
+else
+    ask_bool "System V init script layout" SYSV_INIT
+    if [ "$SYSV_INIT" = "y" ] ; then
+	ask_str "Top-level directory for RC scripts" RC_DIR
+    fi
+fi
+
+echo ""
+
 
 #=======================================================================
 
@@ -503,42 +524,12 @@
 	write_str_ne $x
 done
 for x in CROSS_COMPILE CROSS_CPPFLAGS CROSS_LDFLAGS \
-	 BTDIR LINUX PREFIX PROGDIR LIBDIR RCDIR ARCH HOST_ARCH \
+	 BTDIR LINUX PREFIX PROGDIR MODDIR LIBDIR RCDIR ARCH HOST_ARCH SYSV_INIT RC_DIR \
 	 CPPFLAGS_KERNEL CPPFLAGS CFLAGS LDFLAGS CPPFLAGS_GLIB LDFLAGS_GLIB \
 	 CPPFLAGS_OBEX LDFLAGS_OBEX; do
     write_str_cfg $x
 done
 write_nl
-
-#=======================================================================
-
-# How should the startup scripts be configured?
-
-if [ "$PREFIX" = "" ] ; then
-    if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o -d /etc/init.d ] ; then
-	echo "It looks like you have a System V init file setup."
-	SYSV_INIT=y
-	if [ -d /sbin/init.d ] ; then
-	    RC_DIR=/sbin/init.d
-	elif [ -d /etc/rc.d/init.d ] ; then
-	    RC_DIR=/etc/rc.d
-	else
-	    RC_DIR=/etc
-	fi
-    else
-	echo "It looks like you have a BSD-ish init file setup."
-	SYSV_INIT=
-    fi
-    write_bool SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then write_str_cfg RC_DIR ; fi
-else
-    ask_bool "System V init script layout" SYSV_INIT
-    if [ "$SYSV_INIT" = "y" ] ; then
-	ask_str "Top-level directory for RC scripts" RC_DIR
-    fi
-fi
-
-echo ""
 
 #=======================================================================
 
diff -Naur Affix-1_00pre2/etc/Makefile affix/etc/Makefile
--- Affix-1_00pre2/etc/Makefile	Fri May 31 01:44:35 2002
+++ affix/etc/Makefile	Mon Jun  3 13:34:36 2002
@@ -18,7 +18,7 @@
 #   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
 #
 #
-#   $Id: Makefile,v 1.25 2002/05/30 22:44:35 kds Exp $
+#   $Id: Makefile,v 1.26 2002/06/03 10:34:36 kds Exp $
 #
 #   Makefile for installing scripts
 #
@@ -50,7 +50,7 @@
 	install -m 0755 -d $(PREFIX)/etc/ppp/ip-down.d
 	install -m 0555 ./affix/masq-down $(PREFIX)/etc/ppp/ip-down.d
 
-	if [ -d /etc/modutils ] ; then \
+	@if [ -d /etc/modutils ] ; then \
 		install -m 0644 ./modutils /etc/modutils/affix; \
 		update-modules; \
 	fi

--------------040500000108080004050602--