> Linux 2.4.19pre10-ac2
[....]
After updating to pre10-ac2, the second harddisk gives the following error
output in dmesg:
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DHEA-36481, ATA DISK drive
hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
hdc: CD-540E, ATAPI CD/DVD-ROM drive
hdd: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33)
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=619/64/63, DMA
Partition check:
[....]
The drive itself works without any problems and is not defective.
All partitions are ext3. Here are the IDE related options from .config:
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_TASKFILE_IO=y
hdparm -i says:
/dev/hdb:
Model=Conner Peripherals 1275MB - CFS1275A, FwRev=8.32, SerialNo=EV9228R
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=2477/16/63, TrkSize=40887, SectSize=649, ECCbytes=4
BuffType=DualPortCache, BuffSize=64kB, MaxMultSect=16, MultSect=8
CurCHS=2477/16/63, CurSects=2496816, LBA=yes, LBAsects=2496876
IORDY=on/off, tPIO={min:270,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
Kernel Drive Geometry LogicalCHS=619/64/63 PhysicalCHS=2477/16/63
Does anybody know how to fix this/ what's the cause?
Heinz
-- # Heinz Diehl, 68259 Mannheim, Germany - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/