diff -Nur linux-2.5.20/drivers/net/tulip/eeprom.c thunder-2.5.20/drivers/net/tulip/eeprom.c
--- linux-2.5.20/drivers/net/tulip/eeprom.c Sun Jun 2 19:44:53 2002
+++ thunder-2.5.20/drivers/net/tulip/eeprom.c Fri Jun 7 12:52:19 2002
@@ -95,15 +95,14 @@
if (ee_data[0] == 0xff) {
if (last_mediatable) {
controller_index++;
- printk(KERN_INFO "%s: Controller %d of multiport board.\n",
- dev->name, controller_index);
+ printk(KERN_INFO "tulip%d: Controller %d of multiport board.\n",
+ tp->board_idx, controller_index);
tp->mtable = last_mediatable;
ee_data = last_ee_data;
goto subsequent_board;
} else
- printk(KERN_INFO "%s: Missing EEPROM, this interface may "
- "not work correctly!\n",
- dev->name);
+ printk(KERN_INFO "tulip%d: Missing EEPROM, this interface may "
+ "not work correctly!\n", tp->board_idx);
return;
}
/* Do a fix-up based on the vendor half of the station address prefix. */
@@ -115,16 +114,15 @@
i++; /* An Accton EN1207, not an outlaw Maxtech. */
memcpy(ee_data + 26, eeprom_fixups[i].newtable,
sizeof(eeprom_fixups[i].newtable));
- printk(KERN_INFO "%s: Old format EEPROM on '%s' board. Using"
+ printk(KERN_INFO "tulip%d: Old format EEPROM on '%s' board. Using"
" substitute media control info.\n",
- dev->name, eeprom_fixups[i].name);
+ tp->board_idx, eeprom_fixups[i].name);
break;
}
}
if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
- printk(KERN_INFO "%s: Old style EEPROM with no media selection "
- "information.\n",
- dev->name);
+ printk(KERN_INFO "tulip%d: Old style EEPROM with no media selection "
+ "information.\n", tp->board_idx);
return;
}
}
@@ -151,7 +149,7 @@
/* there is no phy information, don't even try to build mtable */
if (count == 0) {
if (tulip_debug > 0)
- printk(KERN_WARNING "%s: no phy info, aborting mtable build\n", dev->name);
+ printk(KERN_WARNING "tulip%d: no phy info, aborting mtable build\n", tp->board_idx);
return;
}
@@ -167,7 +165,7 @@
mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
mtable->csr15dir = mtable->csr15val = 0;
- printk(KERN_INFO "%s: EEPROM default media type %s.\n", dev->name,
+ printk(KERN_INFO "tulip%d: EEPROM default media type %s.\n", tp->board_idx,
media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
for (i = 0; i < count; i++) {
struct medialeaf *leaf = &mtable->mleaf[i];
@@ -231,14 +229,14 @@
}
if (tulip_debug > 1 && leaf->media == 11) {
unsigned char *bp = leaf->leafdata;
- printk(KERN_INFO "%s: MII interface PHY %d, setup/reset "
+ printk(KERN_INFO "tulip%d: MII interface PHY %d, setup/reset "
"sequences %d/%d long, capabilities %2.2x %2.2x.\n",
- dev->name, bp[0], bp[1], bp[2 + bp[1]*2],
+ tp->board_idx, bp[0], bp[1], bp[2 + bp[1]*2],
bp[5 + bp[2 + bp[1]*2]*2], bp[4 + bp[2 + bp[1]*2]*2]);
}
- printk(KERN_INFO "%s: Index #%d - Media %s (#%d) described "
+ printk(KERN_INFO "tulip%d: Index #%d - Media %s (#%d) described "
"by a %s (%d) block.\n",
- dev->name, i, medianame[leaf->media & 15], leaf->media,
+ tp->board_idx, i, medianame[leaf->media & 15], leaf->media,
leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
leaf->type);
}
diff -Nur linux-2.5.20/drivers/net/tulip/media.c thunder-2.5.20/drivers/net/tulip/media.c
--- linux-2.5.20/drivers/net/tulip/media.c Sun Jun 2 19:44:44 2002
+++ thunder-2.5.20/drivers/net/tulip/media.c Fri Jun 7 12:48:35 2002
@@ -182,9 +182,9 @@
switch (mleaf->type) {
case 0: /* 21140 non-MII xcvr. */
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver"
+ printk(KERN_DEBUG "tulip%d: Using a 21140 non-MII transceiver"
" with control setting %2.2x.\n",
- dev->name, p[1]);
+ tp->board_idx, p[1]);
dev->if_port = p[0];
if (startup)
outl(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -205,15 +205,15 @@
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
- dev->name);
+ printk(KERN_DEBUG "tulip%d: Resetting the transceiver.\n",
+ tp->board_idx);
for (i = 0; i < rst[0]; i++)
outl(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control "
+ printk(KERN_DEBUG "tulip%d: 21143 non-MII %s transceiver control "
"%4.4x/%4.4x.\n",
- dev->name, medianame[dev->if_port], setup[0], setup[1]);
+ tp->board_idx, medianame[dev->if_port], setup[0], setup[1]);
if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */
csr13val = setup[0];
csr14val = setup[1];
@@ -240,8 +240,8 @@
if (startup) outl(csr13val, ioaddr + CSR13);
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Setting CSR15 to %8.8x/%8.8x.\n",
- dev->name, csr15dir, csr15val);
+ printk(KERN_DEBUG "tulip%d: Setting CSR15 to %8.8x/%8.8x.\n",
+ tp->board_idx, csr15dir, csr15val);
if (mleaf->type == 4)
new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
else
@@ -285,8 +285,8 @@
if (tp->mii_advertise == 0)
tp->mii_advertise = tp->advertising[phy_num];
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Advertising %4.4x on MII %d.\n",
- dev->name, tp->mii_advertise, tp->phys[phy_num]);
+ printk(KERN_DEBUG "tulip%d: Advertising %4.4x on MII %d.\n",
+ tp->board_idx, tp->mii_advertise, tp->phys[phy_num]);
tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
}
break;
@@ -303,8 +303,8 @@
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Resetting the transceiver.\n",
- dev->name);
+ printk(KERN_DEBUG "tulip%d: Resetting the transceiver.\n",
+ tp->board_idx);
for (i = 0; i < rst[0]; i++)
outl(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
@@ -312,20 +312,20 @@
break;
}
default:
- printk(KERN_DEBUG "%s: Invalid media table selection %d.\n",
- dev->name, mleaf->type);
+ printk(KERN_DEBUG "tulip%d: Invalid media table selection %d.\n",
+ tp->board_idx, mleaf->type);
new_csr6 = 0x020E0000;
}
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %2.2x.\n",
- dev->name, medianame[dev->if_port],
+ printk(KERN_DEBUG "tulip%d: Using media type %s, CSR12 is %2.2x.\n",
+ tp->board_idx, medianame[dev->if_port],
inl(ioaddr + CSR12) & 0xff);
} else if (tp->chip_id == LC82C168) {
if (startup && ! tp->medialock)
dev->if_port = tp->mii_cnt ? 11 : 0;
if (tulip_debug > 1)
- printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s.\n",
- dev->name, inl(ioaddr + 0xB8), medianame[dev->if_port]);
+ printk(KERN_DEBUG "tulip%d: PNIC PHY status is %3.3x, media %s.\n",
+ tp->board_idx, inl(ioaddr + 0xB8), medianame[dev->if_port]);
if (tp->mii_cnt) {
new_csr6 = 0x810C0000;
outl(0x0001, ioaddr + CSR15);
@@ -358,7 +358,7 @@
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: No media description table, assuming "
"%s transceiver, CSR12 %2.2x.\n",
- dev->name, medianame[dev->if_port],
+ tp->board_idx, medianame[dev->if_port],
inl(ioaddr + CSR12));
}
@@ -418,7 +418,7 @@
return 0;
}
-void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
+void __devinit tulip_find_mii (struct net_device *dev)
{
struct tulip_private *tp = dev->priv;
int phyn, phy_idx = 0;
@@ -468,13 +468,13 @@
printk (KERN_INFO "tulip%d: MII transceiver #%d "
"config %4.4x status %4.4x advertising %4.4x.\n",
- board_idx, phy, mii_reg0, mii_status, mii_advert);
+ tp->board_idx, phy, mii_reg0, mii_status, mii_advert);
/* Fixup for DLink with miswired PHY. */
if (mii_advert != to_advert) {
printk (KERN_DEBUG "tulip%d: Advertising %4.4x on PHY %d,"
" previously advertising %4.4x.\n",
- board_idx, to_advert, phy, mii_advert);
+ tp->board_idx, to_advert, phy, mii_advert);
tulip_mdio_write (dev, phy, 4, to_advert);
}
@@ -520,7 +520,7 @@
tp->mii_cnt = phy_idx;
if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
printk (KERN_INFO "tulip%d: ***WARNING***: No MII transceiver found!\n",
- board_idx);
+ tp->board_idx);
tp->phys[0] = 1;
}
}
diff -Nur linux-2.5.20/drivers/net/tulip/tulip.h thunder-2.5.20/drivers/net/tulip/tulip.h
--- linux-2.5.20/drivers/net/tulip/tulip.h Sun Jun 2 19:44:47 2002
+++ thunder-2.5.20/drivers/net/tulip/tulip.h Fri Jun 7 12:34:19 2002
@@ -389,6 +389,7 @@
unsigned long nir;
unsigned long base_addr;
int pad0, pad1; /* Used for 8-byte alignment */
+ int board_idx; /* The board number of the Tulip card */
};
diff -Nur linux-2.5.20/drivers/net/tulip/tulip_core.c thunder-2.5.20/drivers/net/tulip/tulip_core.c
--- linux-2.5.20/drivers/net/tulip/tulip_core.c Sun Jun 2 19:44:51 2002
+++ thunder-2.5.20/drivers/net/tulip/tulip_core.c Fri Jun 7 12:53:00 2002
@@ -1346,6 +1346,8 @@
return i;
}
+ tp->board_idx = board_idx;
+
ioaddr = pci_resource_start (pdev, 0);
irq = pdev->irq;
@@ -1560,9 +1562,7 @@
}
if (tp->flags & HAS_MEDIA_TABLE) {
- sprintf(dev->name, "tulip%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
- strcpy(dev->name, "eth%d"); /* un-hack */
}
if ((tp->flags & ALWAYS_CHECK_MII) ||
@@ -1582,7 +1582,7 @@
/* Find the connected MII xcvrs.
Doing this in open() would allow detecting external xcvrs
later, but takes much time. */
- tulip_find_mii (dev, board_idx);
+ tulip_find_mii (dev);
}
/* The Tulip-specific entries in the device structure. */
-- Lightweight patch manager using pine. If you have any objections, tell me.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/