Fri Jun 14 15:32:38 CEST 2002 ide-clean-92
- Finally unify task_in_intr and task_mulin_intr. One crucial code path less to
watch out, but a quite dangerous step in itself. PIO reading is functional
again. The next step will be the unification of the write path of course.
- Introduce a small helper for the execution of task file commands which
basically just send a simple command down to the drive.
- Add a buffer parameter to ide_raw_taskfile allowing to unify the handling of
ioctl and normal ide_raw_taskfile request.
- Fix some small function pointer type mismatches.
Apply more host chip controller clenups by Bartlomiej:
- move setting drive->current_speed from *_tune_chipset()
to ide_config_drive_speed()
cmd64x.c:
- convert cmd64x_tuneproc() to use ata-timing library
- clean cmd64x_tune_chipset() and cmd680_tune_chipset()
hpt366.c:
- remove empty timings table
it8172.c:
- kill prototypes
- update to new udma_setup() scheme
+ misc cleanups
--------------070002090706050404090801
Content-Type: text/plain;
name="ide-clean-92.diff"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="ide-clean-92.diff"
diff -urN linux-2.5.21/arch/i386/kernel/dmi_scan.c linux/arch/i386/kernel/dmi_scan.c
--- linux-2.5.21/arch/i386/kernel/dmi_scan.c 2002-06-09 07:29:00.000000000 +0200
+++ linux/arch/i386/kernel/dmi_scan.c 2002-06-16 01:39:27.000000000 +0200
@@ -185,28 +185,6 @@
#define NO_MATCH { NONE, NULL}
#define MATCH(a,b) { a, b }
-/*
- * We have problems with IDE DMA on some platforms. In paticular the
- * KT7 series. On these it seems the newer BIOS has fixed them. The
- * rule needs to be improved to match specific BIOS revisions with
- * corruption problems
- */
-
-#if 0
-static __init int disable_ide_dma(struct dmi_blacklist *d)
-{
-#ifdef CONFIG_BLK_DEV_IDE
- extern int noautodma;
- if(noautodma == 0)
- {
- noautodma = 1;
- printk(KERN_INFO "%s series board detected. Disabling IDE DMA.\n", d->ident);
- }
-#endif
- return 0;
-}
-#endif
-
/*
* Reboot options and system auto-detection code provided by
* Dell Computer Corporation so their systems "just work". :-)
@@ -511,12 +489,6 @@
*/
static __initdata struct dmi_blacklist dmi_blacklist[]={
-#if 0
- { disable_ide_dma, "KT7", { /* Overbroad right now - kill DMA on problem KT7 boards */
- MATCH(DMI_PRODUCT_NAME, "KT7-RAID"),
- NO_MATCH, NO_MATCH, NO_MATCH
- } },
-#endif
{ broken_ps2_resume, "Dell Latitude C600", { /* Handle problems with APM on the C600 */
MATCH(DMI_SYS_VENDOR, "Dell"),
MATCH(DMI_PRODUCT_NAME, "Latitude C600"),
diff -urN linux-2.5.21/drivers/ide/aec62xx.c linux/drivers/ide/aec62xx.c
--- linux-2.5.21/drivers/ide/aec62xx.c 2002-06-14 12:45:00.000000000 +0200
+++ linux/drivers/ide/aec62xx.c 2002-06-14 16:11:19.000000000 +0200
@@ -141,8 +141,6 @@
else
aec_set_speed_new(drive->channel->pci_dev, drive->dn, &t);
- drive->current_speed = speed;
-
return 0;
}
diff -urN linux-2.5.21/drivers/ide/alim15x3.c linux/drivers/ide/alim15x3.c
--- linux-2.5.21/drivers/ide/alim15x3.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/alim15x3.c 2002-06-14 16:11:27.000000000 +0200
@@ -53,6 +53,7 @@
t = ata_timing_data(pio);
+ /* FIXME: use generic ata-timing library --bkz */
s_time = t->setup;
a_time = t->active;
if ((s_clc = (s_time * system_bus_speed + 999999) / 1000000) >= 8)
@@ -171,8 +172,6 @@
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
- drive->current_speed = speed;
-
return ide_config_drive_speed(drive, speed);
}
diff -urN linux-2.5.21/drivers/ide/amd74xx.c linux/drivers/ide/amd74xx.c
--- linux-2.5.21/drivers/ide/amd74xx.c 2002-06-09 07:30:30.000000000 +0200
+++ linux/drivers/ide/amd74xx.c 2002-06-14 16:11:19.000000000 +0200
@@ -153,8 +153,6 @@
amd_set_speed(drive->channel->pci_dev, drive->dn, &t);
- drive->current_speed = speed;
-
return 0;
}
diff -urN linux-2.5.21/drivers/ide/cmd64x.c linux/drivers/ide/cmd64x.c
--- linux-2.5.21/drivers/ide/cmd64x.c 2002-06-14 12:45:13.000000000 +0200
+++ linux/drivers/ide/cmd64x.c 2002-06-14 16:11:27.000000000 +0200
@@ -156,26 +156,27 @@
* 8: prefetch off, 9: prefetch on, 255: auto-select best mode.
* Called with 255 at boot time.
*/
-static void cmd64x_tuneproc(struct ata_device *drive, byte mode_wanted)
+static void cmd64x_tuneproc(struct ata_device *drive, u8 pio)
{
- int recovery_time, clock_time;
- u8 recovery_count2, cycle_count, speed;
- int setup_count, active_count, recovery_count;
+ int T;
+ u8 speed, active, recover;
struct ata_timing *t;
- switch (mode_wanted) {
+ switch (pio) {
+ /* FIXME: b0rken --bkz */
case 8: /* set prefetch off */
case 9: /* set prefetch on */
- mode_wanted &= 1;
+ pio &= 1;
/*set_prefetch_mode(index, mode_wanted);*/
- cmdprintk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
+ cmdprintk("%s: %sabled cmd640 prefetch\n", drive->name,
+ pio ? "en" : "dis");
return;
}
- if (mode_wanted == 255)
+ if (pio == 255)
speed = ata_best_pio_mode(drive);
else
- speed = XFER_PIO_0 + min_t(u8, mode_wanted, 4);
+ speed = XFER_PIO_0 + min_t(u8, pio, 4);
t = ata_timing_data(speed);
@@ -183,24 +184,21 @@
* I copied all this complicated stuff from cmd640.c and made a few minor changes.
* For now I am just going to pray that it is correct.
*/
- /* FIXME: try to use generic ata-timings library --bkz */
+ /* FIXME: verify it --bkz */
+
+ T = 1000000000 / system_bus_speed;
+ ata_timing_quantize(t, t, T, T);
- recovery_time = t->cycle - (t->setup + t->active);
- clock_time = 1000000 / system_bus_speed;
- cycle_count = (t->cycle + clock_time - 1) / clock_time;
- setup_count = (t->setup + clock_time - 1) / clock_time;
- active_count = (t->active + clock_time - 1) / clock_time;
-
- recovery_count = (recovery_time + clock_time - 1) / clock_time;
- recovery_count2 = cycle_count - (setup_count + active_count);
- if (recovery_count2 > recovery_count)
- recovery_count = recovery_count2;
- if (recovery_count > 16) {
- active_count += recovery_count - 16;
- recovery_count = 16;
+ /* FIXME: maybe switch to ata_timing_compute() --bkz */
+ recover = t->cycle - (t->setup + t->active);
+ active = t->active;
+
+ if (recover > 16) {
+ active += recover - 16;
+ recover = 16;
}
- if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd646 */
+ if (active > 16)
+ active = 16; /* maximum allowed by CMD646 */
/*
* In a perfect world, we might set the drive pio mode here
@@ -210,13 +208,12 @@
* 1) this is the wrong place to do it (proper is do_special() in ide.c)
* 2) in practice this is rarely, if ever, necessary
*/
- program_drive_counts (drive, setup_count, active_count, recovery_count);
+ program_drive_counts(drive, t->setup, active, recover);
cmdprintk("%s: selected cmd646 PIO mode%d : %d (%dns), clocks=%d/%d/%d\n",
- drive->name, t.mode - XFER_PIO_0, mode_wanted, cycle_time,
- setup_count, active_count, recovery_count);
+ drive->name, t.mode - XFER_PIO_0, pio, t->cycle,
+ t->setup, active, recover);
- drive->current_speed = speed;
ide_config_drive_speed(drive, speed);
}
@@ -237,7 +234,7 @@
break;
case PCI_DEVICE_ID_CMD_646:
{
- unsigned int class_rev = 0;
+ u32 class_rev;
pci_read_config_dword(dev,
PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
@@ -332,11 +329,10 @@
speed = XFER_PIO_0 + min_t(u8, pio, 4);
- drive->current_speed = speed;
ide_config_drive_speed(drive, speed);
}
-static int cmd64x_tune_chipset(struct ata_device *drive, byte speed)
+static int cmd64x_tune_chipset(struct ata_device *drive, u8 speed)
{
#ifdef CONFIG_BLK_DEV_IDEDMA
struct ata_channel *hwif = drive->channel;
@@ -345,34 +341,40 @@
u8 unit = (drive->select.b.unit & 0x01);
u8 pciU = (hwif->unit) ? UDIDETCR1 : UDIDETCR0;
u8 pciD = (hwif->unit) ? BMIDESR1 : BMIDESR0;
- u8 regU, regD;
+ u8 regU, regD, U = 0, D = 0;
if ((drive->type != ATA_DISK) && (speed < XFER_SW_DMA_0))
return 1;
- (void) pci_read_config_byte(dev, pciD, ®D);
- (void) pci_read_config_byte(dev, pciU, ®U);
+ pci_read_config_byte(dev, pciD, ®D);
+ pci_read_config_byte(dev, pciU, ®U);
+
+ /* unit 1 - 01000000b unit 0 - 00100000b */
regD &= ~(unit ? 0x40 : 0x20);
+
+ /* unit 1 - 11001010b unit 0 - 00110101b */
regU &= ~(unit ? 0xCA : 0x35);
- (void) pci_write_config_byte(dev, pciD, regD);
- (void) pci_write_config_byte(dev, pciU, regU);
- (void) pci_read_config_byte(dev, pciD, ®D);
- (void) pci_read_config_byte(dev, pciU, ®U);
- /* FIXME: get unit checking out of here --bkz */
+ pci_write_config_byte(dev, pciD, regD);
+ pci_write_config_byte(dev, pciU, regU);
+
+ pci_read_config_byte(dev, pciD, ®D);
+ pci_read_config_byte(dev, pciU, ®U);
+
switch(speed) {
- case XFER_UDMA_5: regU |= (unit ? 0x0A : 0x05); break;
- case XFER_UDMA_4: regU |= (unit ? 0x4A : 0x15); break;
- case XFER_UDMA_3: regU |= (unit ? 0x8A : 0x25); break;
- case XFER_UDMA_2: regU |= (unit ? 0x42 : 0x11); break;
- case XFER_UDMA_1: regU |= (unit ? 0x82 : 0x21); break;
- case XFER_UDMA_0: regU |= (unit ? 0xC2 : 0x31); break;
- case XFER_MW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
- case XFER_MW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
- case XFER_MW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
- case XFER_SW_DMA_2: regD |= (unit ? 0x40 : 0x10); break;
- case XFER_SW_DMA_1: regD |= (unit ? 0x80 : 0x20); break;
- case XFER_SW_DMA_0: regD |= (unit ? 0xC0 : 0x30); break;
+ /* FIXME: use tables --bkz */
+ case XFER_UDMA_5: U = 0x05; break;
+ case XFER_UDMA_4: U = 0x15; break;
+ case XFER_UDMA_3: U = 0x25; break;
+ case XFER_UDMA_2: U = 0x11; break;
+ case XFER_UDMA_1: U = 0x21; break;
+ case XFER_UDMA_0: U = 0x31; break;
+ case XFER_MW_DMA_2: D = 0x10; break;
+ case XFER_MW_DMA_1: D = 0x20; break;
+ case XFER_MW_DMA_0: D = 0x30; break;
+ case XFER_SW_DMA_2: D = 0x10; break;
+ case XFER_SW_DMA_1: D = 0x20; break;
+ case XFER_SW_DMA_0: D = 0x30; break;
#else
switch(speed) {
#endif /* CONFIG_BLK_DEV_IDEDMA */
@@ -390,15 +392,22 @@
cmd64x_tuneproc(drive, 255);
#ifdef CONFIG_BLK_DEV_IDEDMA
- (void) pci_write_config_byte(dev, pciU, regU);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
- drive->current_speed = speed;
+ if (unit) {
+ if (speed >= XFER_UDMA_0)
+ regU |= (((U & 0xf0) << 2) | ((U & 0x0f) << 1));
+ else if (speed >= XFER_SW_DMA_0)
+ regD |= ((D & 0xf0) << 2);
+ } else {
+ regU |= U;
+ regD |= D;
+ }
+
+ pci_write_config_byte(dev, pciU, regU);
-#ifdef CONFIG_BLK_DEV_IDEDMA
regD |= (unit ? 0x40 : 0x20);
- (void) pci_write_config_byte(dev, pciD, regD);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
+ pci_write_config_byte(dev, pciD, regD);
+#endif
return ide_config_drive_speed(drive, speed);
}
@@ -410,19 +419,20 @@
u8 addr_mask = (hwif->unit) ? 0x84 : 0x80;
u8 unit = (drive->select.b.unit & 0x01);
u8 dma_pci, udma_pci;
- u8 mode_pci, scsc;
+ u8 mode_pci, scsc, scsc_on = 0;
u16 ultra, multi;
pci_read_config_byte(dev, addr_mask, &mode_pci);
pci_read_config_byte(dev, 0x8A, &scsc);
switch (drive->dn) {
- case 0: dma_pci = 0xA8; udma_pci = 0xAC; break;
- case 1: dma_pci = 0xAA; udma_pci = 0xAE; break;
- case 2: dma_pci = 0xB8; udma_pci = 0xBC; break;
- case 3: dma_pci = 0xBA; udma_pci = 0xBE; break;
+ case 0: dma_pci = 0xA8; break;
+ case 1: dma_pci = 0xAA; break;
+ case 2: dma_pci = 0xB8; break;
+ case 3: dma_pci = 0xBA; break;
default: return 1;
}
+ udma_pci = dma_pci + 4;
pci_read_config_byte(dev, addr_mask, &mode_pci);
mode_pci &= ~((unit) ? 0x30 : 0x03);
@@ -434,46 +444,38 @@
pci_read_config_byte(dev, 0x8A, &scsc);
}
+ if (speed >= XFER_UDMA_0) {
+ ultra &= ~0x3F;
+ multi = 0x10C1;
+ scsc_on = ((scsc & 0x30) == 0x00) ? 1 : 0;
+ }
+
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_UDMA_6:
- if ((scsc & 0x30) == 0x00)
+ if (scsc_on)
goto speed_break;
- multi = 0x10C1;
- ultra &= ~0x3F;
ultra |= 0x01;
break;
speed_break :
speed = XFER_UDMA_5;
case XFER_UDMA_5:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x01 : 0x02);
+ ultra |= (scsc_on ? 0x01 : 0x02);
break;
case XFER_UDMA_4:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x02 : 0x03);
+ ultra |= (scsc_on ? 0x02 : 0x03);
break;
case XFER_UDMA_3:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x04 : 0x05);
+ ultra |= (scsc_on ? 0x04 : 0x05);
break;
case XFER_UDMA_2:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x05 : 0x07);
+ ultra |= (scsc_on ? 0x05 : 0x07);
break;
case XFER_UDMA_1:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x07 : 0x0B);
+ ultra |= (scsc_on ? 0x07 : 0x0B);
break;
case XFER_UDMA_0:
- multi = 0x10C1;
- ultra &= ~0x3F;
- ultra |= (((scsc & 0x30) == 0x00) ? 0x0C : 0x0F);
+ ultra |= (scsc_on ? 0x0C : 0x0F);
break;
case XFER_MW_DMA_2:
multi = 0x10C1;
@@ -509,8 +511,6 @@
pci_write_config_word(dev, dma_pci, multi);
pci_write_config_word(dev, udma_pci, ultra);
- drive->current_speed = speed;
-
return ide_config_drive_speed(drive, speed);
}
@@ -520,11 +520,6 @@
int map;
u8 mode;
- if (drive->type != ATA_DISK) {
- cmdprintk("CMD64X: drive is not a disk at double check, inital check failed!!\n");
- return 0;
- }
-
if (udma)
map = cmd64x_ratemask(drive);
else
@@ -728,8 +723,8 @@
static unsigned int cmd64x_pci_init(struct pci_dev *dev)
{
- unsigned char mrdmode;
- unsigned int class_rev;
+ u8 mrdmode;
+ u32 class_rev;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
diff -urN linux-2.5.21/drivers/ide/Config.help linux/drivers/ide/Config.help
--- linux-2.5.21/drivers/ide/Config.help 2002-06-14 12:45:00.000000000 +0200
+++ linux/drivers/ide/Config.help 2002-06-16 02:37:54.000000000 +0200
@@ -372,6 +372,8 @@
HPT366 is an Ultra DMA chipset for ATA-66.
HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
HPT370 is an Ultra DMA chipset for ATA-100.
+ HPT372 is an Ultra DMA chipset for ATA-100.
+ HPT374 is an Ultra DMA chipset for ATA-100.
This driver adds up to 4 more EIDE devices sharing a single
interrupt.
diff -urN linux-2.5.21/drivers/ide/Config.in linux/drivers/ide/Config.in
--- linux-2.5.21/drivers/ide/Config.in 2002-06-14 12:45:00.000000000 +0200
+++ linux/drivers/ide/Config.in 2002-06-16 02:37:14.000000000 +0200
@@ -50,7 +50,7 @@
dep_bool ' Cyrix CS5530 MediaGX chipset support' CONFIG_BLK_DEV_CS5530 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' HPT34X chipset support' CONFIG_BLK_DEV_HPT34X $CONFIG_BLK_DEV_IDEDMA_PCI
dep_mbool ' HPT34X AUTODMA support (EXPERMENTAL)' CONFIG_HPT34X_AUTODMA $CONFIG_BLK_DEV_HPT34X $CONFIG_EXPERIMENTAL
- dep_bool ' HPT366 chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
+ dep_bool ' HPT36X/37X chipset support' CONFIG_BLK_DEV_HPT366 $CONFIG_BLK_DEV_IDEDMA_PCI
dep_bool ' Intel and Efar (SMsC) chipset support' CONFIG_BLK_DEV_PIIX $CONFIG_BLK_DEV_IDEDMA_PCI
if [ "$CONFIG_MIPS_ITE8172" = "y" -o "$CONFIG_MIPS_IVR" = "y" ]; then
dep_mbool ' IT8172 IDE support' CONFIG_BLK_DEV_IT8172 $CONFIG_BLK_DEV_IDEDMA_PCI
diff -urN linux-2.5.21/drivers/ide/cy82c693.c linux/drivers/ide/cy82c693.c
--- linux-2.5.21/drivers/ide/cy82c693.c 2002-06-14 12:45:05.000000000 +0200
+++ linux/drivers/ide/cy82c693.c 2002-06-14 16:11:27.000000000 +0200
@@ -204,7 +204,7 @@
data = IN_BYTE(CY82_DATA_PORT);
printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n", drive->name, drive->channel->unit, drive->select.b.unit, (data&0x3), ((data>>2)&1));
-#endif /* CY82C693_DEBUG_LOGS */
+#endif
data = (byte)mode|(byte)(single<<2);
@@ -213,7 +213,7 @@
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n", drive->name, drive->channel->unit, drive->select.b.unit, mode, single);
-#endif /* CY82C693_DEBUG_INFO */
+#endif
/*
* note: below we set the value for Bus Master IDE TimeOut Register
@@ -231,7 +231,7 @@
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n", drive->name, data);
-#endif /* CY82C693_DEBUG_INFO */
+#endif
}
/*
@@ -331,7 +331,7 @@
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
-#endif /* CY82C693_DEBUG_INFO */
+#endif
compute_clocks(pio, &pclk); /* let's calc the values for this PIO mode */
diff -urN linux-2.5.21/drivers/ide/hpt34x.c linux/drivers/ide/hpt34x.c
--- linux-2.5.21/drivers/ide/hpt34x.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/hpt34x.c 2002-06-14 16:11:19.000000000 +0200
@@ -63,7 +63,6 @@
udma, pio, err);
#endif
- drive->current_speed = speed;
return ide_config_drive_speed(drive, speed);
}
diff -urN linux-2.5.21/drivers/ide/hpt366.c linux/drivers/ide/hpt366.c
--- linux-2.5.21/drivers/ide/hpt366.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/hpt366.c 2002-06-14 16:14:21.000000000 +0200
@@ -140,7 +140,7 @@
unsigned int chipset_settings;
};
-/* key for bus clock timings
+/* key for bus clock timings for HPT370
* bit
* 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW
* DMA. cycles = value + 1
@@ -409,26 +409,6 @@
};
#if 0
-static struct chipset_bus_clock_list_entry fifty_base_hpt374[] = {
- { XFER_UDMA_6, },
- { XFER_UDMA_5, },
- { XFER_UDMA_4, },
- { XFER_UDMA_3, },
- { XFER_UDMA_2, },
- { XFER_UDMA_1, },
- { XFER_UDMA_0, },
- { XFER_MW_DMA_2, },
- { XFER_MW_DMA_1, },
- { XFER_MW_DMA_0, },
- { XFER_PIO_4, },
- { XFER_PIO_3, },
- { XFER_PIO_2, },
- { XFER_PIO_1, },
- { XFER_PIO_0, },
- { 0, }
-};
-#endif
-#if 0
static struct chipset_bus_clock_list_entry sixty_six_base_hpt374[] = {
{ XFER_UDMA_6, 0x12406231 }, /* checkme */
{ XFER_UDMA_5, 0x12446231 },
@@ -678,21 +658,13 @@
} else {
hpt366_tune_chipset(drive, speed);
}
- drive->current_speed = speed;
+
return ide_config_drive_speed(drive, speed);
}
static void hpt3xx_tune_drive(struct ata_device *drive, u8 pio)
{
- u8 speed;
- switch(pio) {
- case 4: speed = XFER_PIO_4;break;
- case 3: speed = XFER_PIO_3;break;
- case 2: speed = XFER_PIO_2;break;
- case 1: speed = XFER_PIO_1;break;
- default: speed = XFER_PIO_0;break;
- }
- (void) hpt3xx_tune_chipset(drive, speed);
+ (void) hpt3xx_tune_chipset(drive, XFER_PIO_0 + min_t(u8, pio, 4));
}
#ifdef CONFIG_BLK_DEV_IDEDMA
diff -urN linux-2.5.21/drivers/ide/ide.c linux/drivers/ide/ide.c
--- linux-2.5.21/drivers/ide/ide.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/ide.c 2002-06-16 16:10:28.000000000 +0200
@@ -560,7 +560,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = drive->sect;
args.cmd = WIN_RESTORE;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
printk(KERN_INFO "%s: done!\n", drive->name);
}
diff -urN linux-2.5.21/drivers/ide/ide-disk.c linux/drivers/ide/ide-disk.c
--- linux-2.5.21/drivers/ide/ide-disk.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/ide-disk.c 2002-06-16 19:29:02.000000000 +0200
@@ -93,61 +93,74 @@
/*
* Handler for command with PIO data-in phase.
*/
-static ide_startstop_t task_in_intr(struct ata_device *drive, struct request *rq)
+static ide_startstop_t pio_in_intr(struct ata_device *drive, struct request *rq)
{
unsigned long flags;
struct ata_channel *ch = drive->channel;
- int ret;
+ unsigned int msect;
spin_lock_irqsave(ch->lock, flags);
-
if (!ata_status(drive, DATA_READY, BAD_R_STAT)) {
- if (drive->status & (ERR_STAT | DRQ_STAT)) {
+ if (drive->status & (ERR_STAT|DRQ_STAT)) {
spin_unlock_irqrestore(ch->lock, flags);
return ata_error(drive, rq, __FUNCTION__);
}
- /* no data yet, so wait for another interrupt */
- ata_set_handler(drive, task_in_intr, WAIT_CMD, NULL);
+ if (!(drive->status & BUSY_STAT))
+ goto cont;
+ }
- ret = ide_started;
- } else {
+ msect = drive->mult_count;
+ do {
+ unsigned int nsect;
- // printk("Read: %p, rq->current_nr_sectors: %d\n", buf, (int) rq->current_nr_sectors);
+ if (drive->mult_count) {
+ nsect = rq->current_nr_sectors;
+ /* Don't try to transfer more sectors at once then one
+ * multi sector command can swallow.
+ */
+ if (nsect > msect)
+ nsect = msect;
+ } else {
+ nsect = rq->current_nr_sectors;
+ nsect = 1;
+ }
+
+// printk("Read: rq->current_nr_sectors: %d %d %d\n", msect, nsect, (int) rq->current_nr_sectors);
{
unsigned long flags;
char *buf;
buf = ide_map_rq(rq, &flags);
- ata_read(drive, buf, SECTOR_WORDS);
+ ata_read(drive, buf, nsect * SECTOR_WORDS);
ide_unmap_rq(rq, buf, &flags);
}
- /* First segment of the request is complete. note that this does not
- * necessarily mean that the entire request is done!! this is only true
- * if ata_end_request() returns 0.
+ /* Segment of the request is complete. note that this does not
+ * necessarily mean that the entire request is done!! this is
+ * only true if ata_end_request() returns 0.
*/
+
rq->errors = 0;
- --rq->current_nr_sectors;
+ rq->current_nr_sectors -= nsect;
if (rq->current_nr_sectors <= 0) {
if (!__ata_end_request(drive, rq, 1, 0)) {
- // printk("Request Ended stat: %02x\n", drive->status);
spin_unlock_irqrestore(ch->lock, flags);
return ide_stopped;
}
}
+ msect -= nsect;
+ } while (msect > 0);
- /* still data left to transfer */
- ata_set_handler(drive, task_in_intr, WAIT_CMD, NULL);
-
- ret = ide_started;
- }
+cont:
+ /* still data left to transfer */
+ ata_set_handler(drive, pio_in_intr, WAIT_CMD, NULL);
spin_unlock_irqrestore(ch->lock, flags);
- return ret;
+ return ide_started;
}
/*
@@ -190,77 +203,6 @@
return ret;
}
-/*
- * Handler for command with Read Multiple
- */
-static ide_startstop_t task_mulin_intr(struct ata_device *drive, struct request *rq)
-{
- unsigned long flags;
- struct ata_channel *ch = drive->channel;
- int ret;
-
- spin_lock_irqsave(ch->lock, flags);
- if (!ata_status(drive, DATA_READY, BAD_R_STAT)) {
- if (drive->status & (ERR_STAT | DRQ_STAT)) {
- spin_unlock_irqrestore(ch->lock, flags);
-
- return ata_error(drive, rq, __FUNCTION__);
- }
-
- /* no data yet, so wait for another interrupt */
- ata_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
-
- ret = ide_started;
- } else {
- unsigned int msect;
-
- /* (ks/hs): Fixed Multi-Sector transfer */
- msect = drive->mult_count;
-
- do {
- unsigned int nsect;
-
- nsect = rq->current_nr_sectors;
- if (nsect > msect)
- nsect = msect;
-
-#if 0
- printk("Multiread: %p, nsect: %d , rq->current_nr_sectors: %d\n",
- buf, nsect, rq->current_nr_sectors);
-#endif
- {
- unsigned long flags;
- char *buf;
-
- buf = ide_map_rq(rq, &flags);
- ata_read(drive, buf, nsect * SECTOR_WORDS);
- ide_unmap_rq(rq, buf, &flags);
- }
-
- rq->errors = 0;
- rq->current_nr_sectors -= nsect;
-
- /* FIXME: this seems buggy */
- if (rq->current_nr_sectors <= 0) {
- if (!__ata_end_request(drive, rq, 1, 0)) {
- spin_unlock_irqrestore(ch->lock, flags);
-
- return ide_stopped;
- }
- }
- msect -= nsect;
- } while (msect);
-
- /* more data left */
- ata_set_handler(drive, task_mulin_intr, WAIT_CMD, NULL);
-
- ret = ide_started;
- }
- spin_unlock_irqrestore(ch->lock, flags);
-
- return ret;
-}
-
static ide_startstop_t task_mulout_intr(struct ata_device *drive, struct request *rq)
{
unsigned long flags;
@@ -610,10 +552,10 @@
} else if (drive->using_dma) {
args.cmd = WIN_READDMA_EXT;
} else if (drive->mult_count) {
- args.XXX_handler = task_mulin_intr;
+ args.XXX_handler = pio_in_intr;
args.cmd = WIN_MULTREAD_EXT;
} else {
- args.XXX_handler = task_in_intr;
+ args.XXX_handler = pio_in_intr;
args.cmd = WIN_READ_EXT;
}
} else {
@@ -622,11 +564,10 @@
} else if (drive->using_dma) {
args.cmd = WIN_READDMA;
} else if (drive->mult_count) {
- /* FIXME : Shouldn't this be task_mulin_intr?! */
- args.XXX_handler = task_in_intr;
+ args.XXX_handler = pio_in_intr;
args.cmd = WIN_MULTREAD;
} else {
- args.XXX_handler = task_in_intr;
+ args.XXX_handler = pio_in_intr;
args.cmd = WIN_READ;
}
}
@@ -673,6 +614,19 @@
return __do_request(drive, &args, rq);
}
+/*
+ * Small helper function used to execute simple commands.
+ */
+static int simple_taskfile(struct ata_device *drive, u8 cmd)
+{
+ struct ata_taskfile args;
+
+ memset(&args, 0, sizeof(args));
+ args.cmd = cmd;
+
+ return ide_raw_taskfile(drive, &args, NULL);
+}
+
static int idedisk_open(struct inode *inode, struct file *__fp, struct ata_device *drive)
{
MOD_INC_USE_COUNT;
@@ -681,15 +635,11 @@
/*
* Ignore the return code from door_lock, since the open() has
- * already succeeded once, and the door_lock is irrelevant at this
- * time.
+ * already succeeded once, and the door_lock is irrelevant at
+ * this time.
*/
if (drive->doorlocking) {
- struct ata_taskfile args;
-
- memset(&args, 0, sizeof(args));
- args.cmd = WIN_DOORLOCK;
- if (ide_raw_taskfile(drive, &args))
+ if (simple_taskfile(drive, WIN_DOORLOCK))
drive->doorlocking = 0;
}
}
@@ -699,30 +649,21 @@
static int flush_cache(struct ata_device *drive)
{
- struct ata_taskfile args;
-
- memset(&args, 0, sizeof(args));
+ u8 cmd;
if (drive->id->cfs_enable_2 & 0x2400)
- args.cmd = WIN_FLUSH_CACHE_EXT;
+ cmd = WIN_FLUSH_CACHE_EXT;
else
- args.cmd = WIN_FLUSH_CACHE;
+ cmd = WIN_FLUSH_CACHE;
- return ide_raw_taskfile(drive, &args);
+ return simple_taskfile(drive, cmd);
}
static void idedisk_release(struct inode *inode, struct file *filp, struct ata_device *drive)
{
if (drive->removable && !drive->usage) {
- /* XXX I don't think this is up to the lowlevel drivers.. --hch */
- invalidate_bdev(inode->i_bdev, 0);
-
if (drive->doorlocking) {
- struct ata_taskfile args;
-
- memset(&args, 0, sizeof(args));
- args.cmd = WIN_DOORUNLOCK;
- if (ide_raw_taskfile(drive, &args))
+ if (simple_taskfile(drive, WIN_DOORUNLOCK))
drive->doorlocking = 0;
}
}
@@ -769,7 +710,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.sector_count = arg;
args.cmd = WIN_SETMULT;
- if (!ide_raw_taskfile(drive, &args)) {
+ if (!ide_raw_taskfile(drive, &args, NULL)) {
/* all went well track this setting as valid */
drive->mult_count = arg;
@@ -798,7 +739,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = (arg) ? SETFEATURES_EN_WCACHE : SETFEATURES_DIS_WCACHE;
args.cmd = WIN_SETFEATURES;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
drive->wcache = arg;
@@ -807,11 +748,7 @@
static int idedisk_standby(struct ata_device *drive)
{
- struct ata_taskfile args;
-
- memset(&args, 0, sizeof(args));
- args.cmd = WIN_STANDBYNOW1;
- return ide_raw_taskfile(drive, &args);
+ return simple_taskfile(drive, WIN_STANDBYNOW1);
}
static int set_acoustic(struct ata_device *drive, int arg)
@@ -822,7 +759,7 @@
args.taskfile.feature = (arg)?SETFEATURES_EN_AAM:SETFEATURES_DIS_AAM;
args.taskfile.sector_count = arg;
args.cmd = WIN_SETFEATURES;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
drive->acoustic = arg;
@@ -942,7 +879,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -964,10 +901,9 @@
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(args));
-
args.taskfile.device_head = 0x40;
args.cmd = WIN_READ_NATIVE_MAX_EXT;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -1005,7 +941,7 @@
args.taskfile.device_head = ((addr_req >> 24) & 0x0f) | 0x40;
args.cmd = WIN_SET_MAX;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
/* if OK, read new maximum address value */
if (!(drive->status & ERR_STAT)) {
@@ -1038,7 +974,7 @@
args.hobfile.high_cylinder = (addr_req >>= 8);
args.hobfile.device_head = 0x40;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
/* if OK, compute maximum address value */
if (!(drive->status & ERR_STAT)) {
diff -urN linux-2.5.21/drivers/ide/ide-pmac.c linux/drivers/ide/ide-pmac.c
--- linux-2.5.21/drivers/ide/ide-pmac.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/ide-pmac.c 2002-06-14 16:38:47.000000000 +0200
@@ -341,21 +341,6 @@
}
}
-#if 0
-/* This one could be later extended to handle CMD IDE and be used by some kind
- * of /proc interface. I want to be able to get the devicetree path of a block
- * device for yaboot configuration
- */
-struct device_node*
-pmac_ide_get_devnode(struct ata_device *drive)
-{
- int i = pmac_ide_find(drive);
- if (i < 0)
- return NULL;
- return pmac_ide[i].node;
-}
-#endif
-
/* Setup timings for the selected drive (master/slave). I still need to verify if this
* is enough, I beleive selectproc will be called whenever an IDE command is started,
* but... */
@@ -1365,7 +1350,7 @@
*/
ix = pmac_ide_find(drive);
if (ix < 0)
- return ide_started;
+ return ide_stopped;
dma = pmac_ide[ix].dma_regs;
ata4 = (pmac_ide[ix].kind == controller_kl_ata4 ||
diff -urN linux-2.5.21/drivers/ide/ide-taskfile.c linux/drivers/ide/ide-taskfile.c
--- linux-2.5.21/drivers/ide/ide-taskfile.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/ide-taskfile.c 2002-06-16 16:07:52.000000000 +0200
@@ -242,8 +242,9 @@
/*
* Invoked on completion of a special REQ_SPECIAL command.
*/
-ide_startstop_t ata_special_intr(struct ata_device *drive, struct
- request *rq) {
+static ide_startstop_t special_intr(struct ata_device *drive,
+ struct request *rq)
+{
struct ata_taskfile *ar = rq->special;
ide_startstop_t ret = ide_stopped;
@@ -292,16 +293,18 @@
return ret;
}
-int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *ar)
+int ide_raw_taskfile(struct ata_device *drive, struct ata_taskfile *ar,
+ char *buffer)
{
struct request req;
ar->command_type = IDE_DRIVE_TASK_NO_DATA;
- ar->XXX_handler = ata_special_intr;
+ ar->XXX_handler = special_intr;
memset(&req, 0, sizeof(req));
req.flags = REQ_SPECIAL;
req.special = ar;
+ req.buffer = buffer;
return ide_do_drive_cmd(drive, &req, ide_wait);
}
@@ -310,5 +313,4 @@
EXPORT_SYMBOL(ide_do_drive_cmd);
EXPORT_SYMBOL(ata_read);
EXPORT_SYMBOL(ata_write);
-EXPORT_SYMBOL(ata_special_intr);
EXPORT_SYMBOL(ide_raw_taskfile);
diff -urN linux-2.5.21/drivers/ide/ioctl.c linux/drivers/ide/ioctl.c
--- linux-2.5.21/drivers/ide/ioctl.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/ioctl.c 2002-06-16 16:10:51.000000000 +0200
@@ -47,7 +47,6 @@
u8 *argbuf = vals;
int argsize = 4;
struct ata_taskfile args;
- struct request req;
/* Second phase.
*/
@@ -78,17 +77,7 @@
memset(argbuf + 4, 0, argsize - 4);
}
- /* Issue ATA command and wait for completion.
- */
- args.command_type = IDE_DRIVE_TASK_NO_DATA;
- args.XXX_handler = ata_special_intr;
-
- memset(&req, 0, sizeof(req));
- req.flags = REQ_SPECIAL;
- req.special = &args;
-
- req.buffer = argbuf + 4;
- err = ide_do_drive_cmd(drive, &req, ide_wait);
+ err = ide_raw_taskfile(drive, &args, argbuf + 4);
argbuf[0] = drive->status;
argbuf[1] = args.taskfile.feature;
diff -urN linux-2.5.21/drivers/ide/it8172.c linux/drivers/ide/it8172.c
--- linux-2.5.21/drivers/ide/it8172.c 2002-06-09 07:26:58.000000000 +0200
+++ linux/drivers/ide/it8172.c 2002-06-14 16:11:27.000000000 +0200
@@ -45,21 +45,11 @@
#include "ata-timing.h"
#include "pcihost.h"
-/*
- * Prototypes
- */
-static void it8172_tune_drive (struct ata_device *drive, byte pio);
-#if defined(CONFIG_BLK_DEV_IDEDMA) && defined(CONFIG_IT8172_TUNING)
-static byte it8172_dma_2_pio (byte xfer_rate);
-static int it8172_tune_chipset (struct ata_device *drive, byte speed);
-static int it8172_config_chipset_for_dma (struct ata_device *drive);
-static int it8172_dmaproc(ide_dma_action_t func, struct ata_device *drive);
-#endif
-void __init ide_init_it8172(struct ata_channel *channel);
-
-static void it8172_tune_drive (struct ata_device *drive, byte pio)
+/* FIXME: fix locking --bkz */
+static void it8172_tune_drive (struct ata_device *drive, u8 pio)
{
+ struct pci_dev *dev = drive->channel->pci_dev;
unsigned long flags;
u16 drive_enables;
u32 drive_timing;
@@ -70,8 +60,8 @@
else
pio = min_t(byte, pio, 4);
- pci_read_config_word(drive->channel->pci_dev, master_port, &master_data);
- pci_read_config_dword(drive->channel->pci_dev, slave_port, &slave_data);
+ pci_read_config_word(dev, master_port, &master_data);
+ pci_read_config_dword(dev, slave_port, &slave_data);
/*
* FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
@@ -102,7 +92,7 @@
save_flags(flags);
cli();
- pci_write_config_word(drive->channel->pci_dev, master_port, master_data);
+ pci_write_config_word(dev, master_port, master_data);
restore_flags(flags);
}
@@ -110,7 +100,7 @@
/*
*
*/
-static byte it8172_dma_2_pio (byte xfer_rate)
+static u8 it8172_dma_2_pio(u8 xfer_rate)
{
switch(xfer_rate) {
case XFER_UDMA_5:
@@ -139,7 +129,7 @@
}
}
-static int it8172_tune_chipset (struct ata_device *drive, byte speed)
+static int it8172_tune_chipset(struct ata_device *drive, u8 speed)
{
struct ata_channel *hwif = drive->channel;
struct pci_dev *dev = hwif->pci_dev;
@@ -147,7 +137,7 @@
int u_flag = 1 << drive->dn;
int u_speed = 0;
int err = 0;
- byte reg48, reg4a;
+ u8 reg48, reg4a;
pci_read_config_byte(dev, 0x48, ®48);
pci_read_config_byte(dev, 0x4a, ®4a);
@@ -187,52 +177,28 @@
it8172_tune_drive(drive, it8172_dma_2_pio(speed));
- err = ide_config_drive_speed(drive, speed);
- drive->current_speed = speed;
- return err;
+ return ide_config_drive_speed(drive, speed);
}
-static int it8172_config_chipset_for_dma(struct ata_device *drive)
+static int it8172_udma_setup(struct ata_device *drive)
{
- struct hd_driveid *id = drive->id;
- byte speed;
-
- speed = ata_timing_mode(drive, XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA | XFER_UDMA);
+ u8 speed = ata_timing_mode(drive, XFER_PIO | XFER_EPIO |
+ XFER_SWDMA | XFER_MWDMA | XFER_UDMA);
- (void) it8172_tune_chipset(drive, speed);
-
- return ((int)((id->dma_ultra >> 11) & 7) ? ide_dma_on :
- ((id->dma_ultra >> 8) & 7) ? ide_dma_on :
- ((id->dma_mword >> 8) & 7) ? ide_dma_on :
- ((id->dma_1word >> 8) & 7) ? ide_dma_on :
- ide_dma_off_quietly);
-}
-
-static int it8172_dmaproc(ide_dma_action_t func, struct ata_device *drive)
-{
- switch (func) {
- case ide_dma_check:
- return ide_dmaproc((ide_dma_action_t)it8172_config_chipset_for_dma(drive),
- drive);
- default :
- break;
- }
- /* Other cases are done by generic IDE-DMA code. */
- return ide_dmaproc(func, drive);
+ return !it8172_tune_chipset(drive, speed);
}
-
#endif /* defined(CONFIG_BLK_DEV_IDEDMA) && (CONFIG_IT8172_TUNING) */
-static unsigned int __init pci_init_it8172 (struct pci_dev *dev)
+static unsigned int __init pci_init_it8172(struct pci_dev *dev)
{
- unsigned char progif;
+ u8 progif;
/*
* Place both IDE interfaces into PCI "native" mode
*/
- (void)pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
- (void)pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ pci_write_config_byte(dev, PCI_CLASS_PROG, progif | 0x05);
return IT8172_IDE_IRQ;
}
diff -urN linux-2.5.21/drivers/ide/opti621.c linux/drivers/ide/opti621.c
--- linux-2.5.21/drivers/ide/opti621.c 2002-06-09 07:27:36.000000000 +0200
+++ linux/drivers/ide/opti621.c 2002-06-14 16:11:27.000000000 +0200
@@ -342,9 +342,8 @@
{
int i;
- for (i = 0; i < ARRAY_SIZE(chipsets); ++i) {
+ for (i = 0; i < ARRAY_SIZE(chipsets); ++i)
ata_register_chipset(&chipsets[i]);
- }
return 0;
}
diff -urN linux-2.5.21/drivers/ide/pcidma.c linux/drivers/ide/pcidma.c
--- linux-2.5.21/drivers/ide/pcidma.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/pcidma.c 2002-06-14 17:26:36.000000000 +0200
@@ -415,7 +415,7 @@
*
* Channel lock should be held.
*/
-int udma_pci_start(struct ata_device *drive, struct request *rq)
+void udma_pci_start(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
unsigned long dma_base = ch->dma_base;
diff -urN linux-2.5.21/drivers/ide/pdc202xx.c linux/drivers/ide/pdc202xx.c
--- linux-2.5.21/drivers/ide/pdc202xx.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/pdc202xx.c 2002-06-14 16:13:07.000000000 +0200
@@ -230,8 +230,6 @@
printk(KERN_DEBUG "DP(%x)\n", DP);
#endif
- drive->current_speed = speed;
-
#if PDC202XX_DEBUG_DRIVE_INFO
printk("%s: %02x drive%d 0x%08x ",
drive->name, speed,
@@ -352,8 +350,6 @@
;
}
- drive->current_speed = speed;
-
return ide_config_drive_speed(drive, speed);
}
@@ -551,7 +547,7 @@
return 0;
}
-static int pdc202xx_udma_start(struct ata_device *drive, struct request *rq)
+static void pdc202xx_udma_start(struct ata_device *drive, struct request *rq)
{
struct ata_channel *ch = drive->channel;
u32 high_16 = pci_resource_start(ch->pci_dev, 4);
diff -urN linux-2.5.21/drivers/ide/piix.c linux/drivers/ide/piix.c
--- linux-2.5.21/drivers/ide/piix.c 2002-06-14 12:45:00.000000000 +0200
+++ linux/drivers/ide/piix.c 2002-06-14 16:11:19.000000000 +0200
@@ -222,8 +222,6 @@
piix_set_speed(drive->channel->pci_dev, drive->dn, &t, umul);
- drive->current_speed = speed;
-
return 0;
}
diff -urN linux-2.5.21/drivers/ide/probe.c linux/drivers/ide/probe.c
--- linux-2.5.21/drivers/ide/probe.c 2002-06-14 12:45:09.000000000 +0200
+++ linux/drivers/ide/probe.c 2002-06-14 16:11:19.000000000 +0200
@@ -339,6 +339,8 @@
ata_irq_enable(drive, 1);
udelay(1);
+ /* FIXME: use ata_status_poll() --bkz */
+
ata_busy_poll(drive, WAIT_CMD);
/*
@@ -395,6 +397,8 @@
default: break;
}
+ drive->current_speed = speed;
+
return error;
}
diff -urN linux-2.5.21/drivers/ide/serverworks.c linux/drivers/ide/serverworks.c
--- linux-2.5.21/drivers/ide/serverworks.c 2002-06-14 12:45:13.000000000 +0200
+++ linux/drivers/ide/serverworks.c 2002-06-14 16:11:27.000000000 +0200
@@ -123,23 +123,21 @@
return map;
}
-static int svwks_tune_chipset(struct ata_device *drive, byte speed)
+static int svwks_tune_chipset(struct ata_device *drive, u8 speed)
{
static u8 dma_modes[] = { 0x77, 0x21, 0x20 };
static u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- struct ata_channel *hwif = drive->channel;
- struct pci_dev *dev = hwif->pci_dev;
- byte unit = (drive->select.b.unit & 0x01);
- byte csb5 = (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ? 1 : 0;
-
- byte drive_pci, drive_pci2;
- byte drive_pci3 = hwif->unit ? 0x57 : 0x56;
+ struct ata_channel *ch = drive->channel;
+ struct pci_dev *dev = ch->pci_dev;
+ u8 unit = drive->select.b.unit & 0x01;
+ u8 drive_pci, drive_pci2;
+ u8 drive_pci3 = ch->unit ? 0x57 : 0x56;
- byte ultra_enable, ultra_timing, dma_timing, pio_timing;
- unsigned short csb5_pio;
+ u8 ultra_enable, ultra_timing, dma_timing, pio_timing;
+ u16 csb5_pio;
- byte pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
+ u8 pio = ata_timing_mode(drive, XFER_PIO | XFER_EPIO) - XFER_PIO_0;
switch (drive->dn) {
case 0: drive_pci = 0x41; break;
@@ -213,7 +211,8 @@
#endif
pci_write_config_byte(dev, drive_pci, pio_timing);
- if (csb5)
+
+ if (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
pci_write_config_word(dev, 0x4A, csb5_pio);
#ifdef CONFIG_BLK_DEV_IDEDMA
@@ -221,29 +220,20 @@
pci_write_config_byte(dev, drive_pci3, ultra_timing);
pci_write_config_byte(dev, 0x54, ultra_enable);
#endif
- drive->current_speed = speed;
return ide_config_drive_speed(drive, speed);
}
-static void svwks_tune_drive(struct ata_device *drive, byte pio)
+static void svwks_tune_drive(struct ata_device *drive, u8 pio)
{
- byte speed;
- switch(pio) {
- case 4: speed = XFER_PIO_4;break;
- case 3: speed = XFER_PIO_3;break;
- case 2: speed = XFER_PIO_2;break;
- case 1: speed = XFER_PIO_1;break;
- default: speed = XFER_PIO_0;break;
- }
- (void) svwks_tune_chipset(drive, speed);
+ (void) svwks_tune_chipset(drive, XFER_PIO_0 + min_t(u8, pio, 4));
}
#ifdef CONFIG_BLK_DEV_IDEDMA
static int config_chipset_for_dma(struct ata_device *drive)
{
int map;
- byte mode;
+ u8 mode;
/* FIXME: check SWDMA modes --bkz */
map = XFER_MWDMA | svwks_ratemask(drive);
@@ -354,7 +344,7 @@
static unsigned int __init svwks_init_chipset(struct pci_dev *dev)
{
unsigned int reg;
- byte btr;
+ u8 btr;
/* save revision id to determine DMA capability */
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
@@ -404,8 +394,7 @@
static unsigned int __init ata66_svwks_dell(struct ata_channel *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
+ if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
return ((1 << (hwif->unit + 14)) &
@@ -422,8 +411,7 @@
static unsigned int __init ata66_svwks_cobalt(struct ata_channel *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
+ if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
return ((1 << (hwif->unit + 14)) &
dev->subsystem_device) ? 1 : 0;
@@ -501,9 +489,8 @@
{
int i;
- for (i = 0; i < ARRAY_SIZE(chipsets); ++i) {
+ for (i = 0; i < ARRAY_SIZE(chipsets); ++i)
ata_register_chipset(&chipsets[i]);
- }
return 0;
}
diff -urN linux-2.5.21/drivers/ide/sis5513.c linux/drivers/ide/sis5513.c
--- linux-2.5.21/drivers/ide/sis5513.c 2002-06-14 12:45:13.000000000 +0200
+++ linux/drivers/ide/sis5513.c 2002-06-14 16:11:27.000000000 +0200
@@ -267,7 +267,7 @@
{
struct ata_channel *hwif = drive->channel;
struct pci_dev *dev = hwif->pci_dev;
- u8 drive_pci, test1, test2, speed;
+ u8 drive_pci, test1, test2;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
@@ -280,13 +280,10 @@
drive->dn, pio, timing);
#endif
- switch(drive->dn) {
- case 0: drive_pci = 0x40; break;
- case 1: drive_pci = 0x42; break;
- case 2: drive_pci = 0x44; break;
- case 3: drive_pci = 0x46; break;
- default: return 1;
- }
+ if (drive->dn > 3) /* FIXME: remove this --bkz */
+ return 1;
+
+ drive_pci = 0x40 + (drive->dn << 1);
/* register layout changed with newer ATA100 chips */
if (chipset_family < ATA_100) {
@@ -321,9 +318,8 @@
#ifdef DEBUG
sis5513_load_verify_registers(dev, "config_drive_art_rwp_pio start");
#endif
- speed = XFER_PIO_0 + min_t(u8, pio, 4);
- drive->current_speed = speed;
- return ide_config_drive_speed(drive, speed);
+
+ return ide_config_drive_speed(drive, XFER_PIO_0 + min_t(u8, pio, 4));
}
static int sis5513_tune_chipset(struct ata_device *drive, u8 speed)
@@ -338,13 +334,11 @@
printk("SIS5513: sis5513_tune_chipset, drive %d, speed %d\n",
drive->dn, speed);
#endif
- switch(drive->dn) {
- case 0: drive_pci = 0x40; break;
- case 1: drive_pci = 0x42; break;
- case 2: drive_pci = 0x44; break;
- case 3: drive_pci = 0x46; break;
- default: return 0;
- }
+
+ if (drive->dn > 3) /* FIXME: remove this --bkz */
+ return 1;
+
+ drive_pci = 0x40 + (drive->dn << 1);
#ifdef BROKEN_LEVEL
#ifdef DEBUG
@@ -396,11 +390,10 @@
default:
return config_art_rwp_pio(drive, 0);
}
- drive->current_speed = speed;
#ifdef DEBUG
sis5513_load_verify_registers(dev, "sis5513_tune_chipset end");
#endif
- return ((int) ide_config_drive_speed(drive, speed));
+ return ide_config_drive_speed(drive, speed);
}
static void sis5513_tune_drive(struct ata_device *drive, u8 pio)
@@ -568,8 +561,8 @@
static unsigned int __init ata66_sis5513(struct ata_channel *hwif)
{
- byte reg48h = 0, ata66 = 0;
- byte mask = hwif->unit ? 0x20 : 0x10;
+ u8 reg48h, ata66 = 0;
+ u8 mask = hwif->unit ? 0x20 : 0x10;
pci_read_config_byte(hwif->pci_dev, 0x48, ®48h);
if (chipset_family >= ATA_66) {
diff -urN linux-2.5.21/drivers/ide/tcq.c linux/drivers/ide/tcq.c
--- linux-2.5.21/drivers/ide/tcq.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/tcq.c 2002-06-14 17:21:37.000000000 +0200
@@ -430,7 +430,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = 0x01;
args.cmd = WIN_NOP;
- ide_raw_taskfile(drive, &args);
+ ide_raw_taskfile(drive, &args, NULL);
if (args.taskfile.feature & ABRT_ERR)
return 1;
@@ -458,7 +458,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_WCACHE;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: failed to enable write cache\n", drive->name);
return 1;
}
@@ -470,7 +470,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_DIS_RI;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: disabling release interrupt fail\n", drive->name);
return 1;
}
@@ -482,7 +482,7 @@
memset(&args, 0, sizeof(args));
args.taskfile.feature = SETFEATURES_EN_SI;
args.cmd = WIN_SETFEATURES;
- if (ide_raw_taskfile(drive, &args)) {
+ if (ide_raw_taskfile(drive, &args, NULL)) {
printk("%s: enabling service interrupt fail\n", drive->name);
return 1;
}
diff -urN linux-2.5.21/drivers/ide/trm290.c linux/drivers/ide/trm290.c
--- linux-2.5.21/drivers/ide/trm290.c 2002-06-14 16:02:00.000000000 +0200
+++ linux/drivers/ide/trm290.c 2002-06-14 17:27:37.000000000 +0200
@@ -176,7 +176,7 @@
}
#ifdef CONFIG_BLK_DEV_IDEDMA
-static int trm290_udma_start(struct ata_device *drive, struct request *__rq)
+static void trm290_udma_start(struct ata_device *drive, struct request *__rq)
{
/* Nothing to be done here. */
}
diff -urN linux-2.5.21/drivers/ide/via82cxxx.c linux/drivers/ide/via82cxxx.c
--- linux-2.5.21/drivers/ide/via82cxxx.c 2002-06-09 07:31:19.000000000 +0200
+++ linux/drivers/ide/via82cxxx.c 2002-06-14 16:11:19.000000000 +0200
@@ -199,8 +199,6 @@
via_set_speed(drive->channel->pci_dev, drive->dn, &t);
- drive->current_speed = speed;
-
return 0;
}
diff -urN linux-2.5.21/include/linux/ide.h linux/include/linux/ide.h
--- linux-2.5.21/include/linux/ide.h 2002-06-14 16:02:00.000000000 +0200
+++ linux/include/linux/ide.h 2002-06-16 16:08:00.000000000 +0200
@@ -679,8 +679,7 @@
bio_kunmap_irq(to, flags);
}
-extern ide_startstop_t ata_special_intr(struct ata_device *, struct request *);
-extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *);
+extern int ide_raw_taskfile(struct ata_device *, struct ata_taskfile *, char *);
extern void ide_fix_driveid(struct hd_driveid *id);
extern int ide_config_drive_speed(struct ata_device *, byte);
@@ -784,7 +783,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
extern void udma_pci_enable(struct ata_device *drive, int on, int verbose);
-extern int udma_pci_start(struct ata_device *drive, struct request *rq);
+extern void udma_pci_start(struct ata_device *drive, struct request *rq);
extern int udma_pci_stop(struct ata_device *drive);
extern int udma_pci_init(struct ata_device *drive, struct request *rq);
extern int udma_pci_irq_status(struct ata_device *drive);
--------------070002090706050404090801--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/