Re: Can't boot from /dev/md0 (RAID-1)

Roy Sigurd Karlsbakk (roy@karlsbakk.net)
Mon, 1 Jul 2002 15:38:55 +0200

> Perhaps you could change the lba32 option into linear ? I'm really
> shooting in the mist here - LILO tends to "just work", and ignorance is
> bliss ;)

It still won't work. It doesn't seem to like boot=/dev/md0. see below

roy

[root@jumbo root]# lilo
Warning: LINEAR is deprecated in favor of LBA32: LINEAR specifies 24-bit
disk addresses below the 1024 cylinder limit; LBA32 specifies 32-bit disk
addresses not subject to cylinder limits on systems with EDD bios
extensions;
use LINEAR only if you are aware of its limitations.
Warning: using BIOS device code 0x80 for RAID boot blocks
Fatal: Filesystem would be destroyed by LILO boot sector: /dev/md0
[root@jumbo root]# 

-- 
Roy Sigurd Karlsbakk, Datavaktmester


Computers are like air conditioners.
They stop working when you open Windows.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/