cmd680 problem in 2.4.19-rc3-ac3

Newsmail (newsmail@satimex.tvnet.hu)
Thu, 25 Jul 2002 10:19:21 +0100


Hi,
I just bought a new kouwell udma133+raid (KW-571B) card that has a cmd680
chip on it.
the card detects nicely my HDs, but after when linux boots I get something
like this:

Jul 23 18:43:28 wk kernel: hdi: IC35L120AVVA07-0, ATA DISK drive
Jul 23 18:43:28 wk kernel: hdj: 2AIC35L120AVVA07-0, ATA DISK drive

Jul 23 18:43:28 wk kernel: hdi: host protected area =>
1
Jul 23 18:43:28 wk kernel: hdi: 241254720 sectors (123522 MB) w/1863KiB
Cache, CHS=239340/16/63, UDMA(100)
Jul 23 18:43:28 wk kernel: hdj: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
Jul 23 18:43:28 wk kernel: hdj: task_no_data_intr: error=0x04 {
DriveStatusError }
Jul 23 18:43:28 wk kernel: hdj: setmax_ext LBA 1,
native 0
Jul 23 18:43:28 wk kernel: hdj: 0 sectors (0 MB) w/1KiB Cache,
CHS=0/255/63, DMA
Jul 23 18:43:28 wk kernel: hdj: set_multmode: status=0x51 { DriveReady
SeekComplete Error }

both HDs are the same IBM120GXP drives. both are perfect, for sure. after
this, I tried this controller card with some maxtor drives. then I got this:

Jul 23 18:43:28 wk kernel: hde: MAXTOR 4K080H4, ATA DISK drive
Jul 23 18:43:28 wk kernel: hdf: 00MAXTOR 4K080H4, ATA DISK drive

Jul 23 18:43:28 wk kernel: hde: host protected area =>
1
Jul 23 18:43:28 wk kernel: hde: 156301488 sectors (80026 MB) w/2000KiB
Cache, CHS=155061/16/63, UDMA(100)
Jul 23 18:43:28 wk kernel: hdf: task_no_data_intr: status=0x53 { DriveReady
SeekComplete Index Error }
Jul 23 18:43:28 wk kernel: hdf: task_no_data_intr: error=0x04 {
DriveStatusError }
Jul 23 18:43:28 wk kernel: hdf: -122814464 sectors (2136142 MB) w/1KiB
Cache, CHS=259704/255/63, DMA
Jul 23 18:43:28 wk kernel: hdf: set_multmode: status=0x51 { DriveReady
SeekComplete Error }
Jul 23 18:43:28 wk kernel: hdf: set_multmode: error=0x04 { DriveStatusError
}

In both cases the SLAVE drive wasnt detected correctly, and after reported
errors. after I tried this out with another card from the same brand, I
tried primary and secondary channel, no luck, I got these same sypmtoms.
all drives worked perfect with promise controllers.
the kernel I used: 2.4.19-rc3-ac3.
I use an asus cuv4x-d motherboard, with 2 pIII 850.
I hope these informations are enough,
best wishes,
greg

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/