Note: I do have an AWARD Bios and have tried the with and without
Auto-Geometry Resizing support compiled in the kernel.
Oly boots if I don't use DMA and generic controller support.
> On Sat, 2002-08-03 at 17:37, firstname.lastname@example.org wrote:
> > Hi,
> > I attempted to upgrade from 2.4.18 to 2.4.19 today but one of machines repeatedly hangs at the "Partition check" on the IDE drives.
> > The machine is a Compaq Proliant 800 Pentium III SMP box with a Highpoint 370 IDE controller. I attempted several reboots with the check continually failing. Rebooting back to 2.4.18 removed the problem.
> > Searching the archive I note several other people have had this problem with 2.4.19-pre kernels but, as yet, there seems to be no resolution?
> Can you try 2.4.19-ac1 once I upload it. That has slightly further
> updated IDE code and it would useful to know if the same problem occurs
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to email@example.com
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-- Gary White firstname.lastname@example.org Network Administrator Internet Pathway P. O. Box 777, 105 D East Church Street Quitman, MS 39355 Voice: 601-776-3355 Fax: 601-776-2314
________________________________________________________ This email has been scanned by Internet Pathway's Email Gateway scanning system for potentially harmful content, such as viruses or spam. Nothing out of the ordinary was detected in this email. For more information, call 601-776-3355 or email email@example.com ________________________________________________________ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/