On Wed, 2002-08-07 at 20:33, Linus Torvalds wrote:
>
> On Wed, 7 Aug 2002, Ingo Molnar wrote:
> >
> > the attached patch (against BK-curr + Luca Barbieri's two TLS patches)
> > does two things:
> >
> > - it implements a second TLS entry for Wine's purposes.
>
> Guys, I really don't like how the segment map ends up getting uglier and
> uglier.
>
> I would suggest:
> - move all kernel-related (and thus non-visible to user space) segments
> up, and make the cacheline optimizations _there_.
Done.
> - keep the TLS entries contiguous, and make sure that segment 0040 (ie
> GDT entry #8) is available to a TLS entry, since if I remember
> correctly, that one is also magical for old Windows binaries for all
> the wrong reasons (ie it was some system data area in DOS and in
> Windows 3.1)
Done. Segment 0x40 set to CPL 3.
> - and for cleanliness bonus points: make the regular user data segments
> just another TLS segment that just happens to have default values. If
> the user wants to screw with its own segments, let it.
Bad idea: makes task switch slower without any practical advantage.
The user may load a TLS or LDT selector in %ds to get the same effect.
> Then, for double extra bonus points somebody should look into whether
> those damn PnP BIOS segments could be simply made to be TLS segments
> during module init. I don't know if that PnP stuff is required later or
> not.
Not sure what you mean. The current definition of TLS segments is "a
minimal number of GDT entries that are modified on task switch and that
can be set on a per-task basis so that the selectors can be loaded %fs
and %gs". How can kernel PNPBIOS segments fit in this definition?
The patch changes the descriptior layout so that LDT is in the kernel
segment cacheline, the 16-bit APM segments are together and user
segments are together. It also sets segment 0x40 CPL to 3.
__BOOT_CS and __BOOT_DS are introduced as the value of segment selectors
during boot (so that we don't have to enlarge the gdt in setup.s).
New layout:
* 0 - null
* 1 - PNPBIOS support (16->32 gate)
* 2 - boot code segment
* 3 - boot data segment
* 4 - PNPBIOS support <==== new cacheline
* 5 - PNPBIOS support
* 6 - PNPBIOS support
* 7 - PNPBIOS support
* 8 - APM BIOS support (0x400-0x1000)<==== new cacheline
* 9 - APM BIOS support
* 10 - APM BIOS support
* 11 - APM BIOS support
* 12 - kernel code segment <==== new cacheline
* 13 - kernel data segment
* 14 - TSS
* 15 - LDT
* ------- start of user segments
* 16 - user code segment <==== new cacheline
* 17 - user data segment
* 18 - Thread-Local Storage (TLS) segment #1
* 19 - Thread-Local Storage (TLS) segment #2
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S
--- a/arch/i386/boot/compressed/head.S 2002-07-20 21:12:21.000000000 +0200
+++ b/arch/i386/boot/compressed/head.S 2002-08-08 00:14:45.000000000 +0200
@@ -31,7 +31,7 @@
startup_32:
cld
cli
- movl $(__KERNEL_DS),%eax
+ movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
@@ -74,7 +74,7 @@
popl %esi # discard address
popl %esi # real mode pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000
/*
* We come here, if we were loaded high.
@@ -101,7 +101,7 @@
popl %eax # hcount
movl $0x100000,%edi
cli # make sure we don't get interrupted
- ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
+ ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
/*
* Routine (template) for moving the decompressed kernel in place,
@@ -124,5 +124,5 @@
movsl
movl %ebx,%esi # Restore setup pointer
xorl %ebx,%ebx
- ljmp $(__KERNEL_CS), $0x100000
+ ljmp $(__BOOT_CS), $0x100000
move_routine_end:
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/arch/i386/boot/compressed/misc.c b/arch/i386/boot/compressed/misc.c
--- a/arch/i386/boot/compressed/misc.c 2002-07-20 21:11:24.000000000 +0200
+++ b/arch/i386/boot/compressed/misc.c 2002-08-07 23:48:58.000000000 +0200
@@ -299,7 +299,7 @@
struct {
long * a;
short b;
- } stack_start = { & user_stack [STACK_SIZE] , __KERNEL_DS };
+ } stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS };
static void setup_normal_output_buffer(void)
{
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
--- a/arch/i386/boot/setup.S 2002-07-20 21:11:05.000000000 +0200
+++ b/arch/i386/boot/setup.S 2002-08-08 00:14:30.000000000 +0200
@@ -801,7 +801,7 @@
subw $DELTA_INITSEG, %si
shll $4, %esi # Convert to 32-bit pointer
# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__KERNEL_CS
+# jmpi 0x100000,__BOOT_CS
#
# but we yet haven't reloaded the CS register, so the default size
# of the target offset still is 16 bit.
@@ -812,7 +812,7 @@
.byte 0x66, 0xea # prefix + jmpi-opcode
code32: .long 0x1000 # will be set to 0x100000
# for big kernels
- .word __KERNEL_CS
+ .word __BOOT_CS
# Here's a bunch of information about your current kernel..
kernel_version: .ascii UTS_RELEASE
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S
--- a/arch/i386/kernel/head.S 2002-08-07 19:03:24.000000000 +0200
+++ b/arch/i386/kernel/head.S 2002-08-08 00:08:48.000000000 +0200
@@ -46,7 +46,7 @@
* Set segments to known values
*/
cld
- movl $(__KERNEL_DS),%eax
+ movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
@@ -239,12 +239,7 @@
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
-#ifdef CONFIG_SMP
- movl $(__KERNEL_DS), %eax
- movl %eax,%ss # Reload the stack pointer (segment only)
-#else
- lss stack_start,%esp # Load processor stack
-#endif
+ movl %eax,%ss
xorl %eax,%eax
lldt %ax
cld # gcc2 wants the direction flag cleared at all times
@@ -311,7 +306,7 @@
ENTRY(stack_start)
.long init_thread_union+8192
- .long __KERNEL_DS
+ .long __BOOT_DS
/* This is the default interrupt "handler" :-) */
int_msg:
@@ -415,31 +410,30 @@
* The Global Descriptor Table contains 20 quadwords, per-CPU.
*/
ENTRY(cpu_gdt_table)
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x0000000000000000 /* TSS descriptor */
- .quad 0x00cf9a000000ffff /* 0x10 kernel 4GB code at 0x00000000 */
- .quad 0x00cf92000000ffff /* 0x18 kernel 4GB data at 0x00000000 */
- .quad 0x00cffa000000ffff /* 0x23 user 4GB code at 0x00000000 */
- .quad 0x00cff2000000ffff /* 0x2b user 4GB data at 0x00000000 */
- .quad 0x0000000000000000 /* TLS descriptor */
- .quad 0x0000000000000000 /* LDT descriptor */
+ .quad 0x0000000000000000 /* 0x00 NULL descriptor */
+ .quad 0x00c09a0000000000 /* 0x08 PNPBIOS 32-bit code */
+ .quad 0x00cf9a000000ffff /* 0x10 boot 4GB code at 0x00000000 */
+ .quad 0x00cf92000000ffff /* 0x18 boot 4GB data at 0x00000000 */
+ .quad 0x00809a0000000000 /* 0x20 PNPBIOS 16-bit code */
+ .quad 0x0080920000000000 /* 0x28 PNPBIOS 16-bit data */
+ .quad 0x0080920000000000 /* 0x30 PNPBIOS 16-bit data */
+ .quad 0x0080920000000000 /* 0x38 PNPBIOS 16-bit data */
/*
* The APM segments have byte granularity and their bases
* and limits are set at run time.
*/
- .quad 0x0040920000000000 /* 0x40 APM set up for bad BIOS's */
+ .quad 0x0040f20000000000 /* 0x40 APM set up for bad BIOS's */
.quad 0x00409a0000000000 /* 0x48 APM CS code */
.quad 0x00009a0000000000 /* 0x50 APM CS 16 code (16 bit) */
.quad 0x0040920000000000 /* 0x58 APM DS data */
- /* Segments used for calling PnP BIOS */
- .quad 0x00c09a0000000000 /* 0x60 32-bit code */
- .quad 0x00809a0000000000 /* 0x68 16-bit code */
- .quad 0x0080920000000000 /* 0x70 16-bit data */
- .quad 0x0080920000000000 /* 0x78 16-bit data */
- .quad 0x0080920000000000 /* 0x80 16-bit data */
- .quad 0x0000000000000000 /* 0x88 not used */
- .quad 0x0000000000000000 /* 0x90 not used */
- .quad 0x0000000000000000 /* 0x98 not used */
+ .quad 0x00cf9a000000ffff /* 0x60 kernel 4GB code at 0x00000000 */
+ .quad 0x00cf92000000ffff /* 0x68 kernel 4GB data at 0x00000000 */
+ .quad 0x0000000000000000 /* 0x70 TSS descriptor */
+ .quad 0x0000000000000000 /* 0x78 LDT descriptor */
+ .quad 0x00cffa000000ffff /* 0x80 user 4GB code at 0x00000000 */
+ .quad 0x00cff2000000ffff /* 0x88 user 4GB data at 0x00000000 */
+ .quad 0x0000000000000000 /* 0x90 TLS1 descriptor */
+ .quad 0x0000000000000000 /* 0x98 TLS2 descriptor */
#if CONFIG_SMP
.fill (NR_CPUS-1)*GDT_ENTRIES,8,0 /* other CPU's GDT */
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/drivers/pnp/pnpbios_core.c b/drivers/pnp/pnpbios_core.c
--- a/drivers/pnp/pnpbios_core.c 2002-08-02 01:19:05.000000000 +0200
+++ b/drivers/pnp/pnpbios_core.c 2002-08-08 00:03:13.000000000 +0200
@@ -90,12 +90,13 @@
static union pnp_bios_expansion_header * pnp_bios_hdr = NULL;
/* The PnP BIOS entries in the GDT */
-#define PNP_GDT (0x0060)
-#define PNP_CS32 (PNP_GDT+0x00) /* segment for calling fn */
-#define PNP_CS16 (PNP_GDT+0x08) /* code segment for BIOS */
-#define PNP_DS (PNP_GDT+0x10) /* data segment for BIOS */
-#define PNP_TS1 (PNP_GDT+0x18) /* transfer data segment */
-#define PNP_TS2 (PNP_GDT+0x20) /* another data segment */
+#define PNP_CS32 (0x08) /* segment for calling fn */
+
+#define PNP_GDT (0x20)
+#define PNP_CS16 (PNP_GDT+0x00) /* code segment for BIOS */
+#define PNP_DS (PNP_GDT+0x08) /* data segment for BIOS */
+#define PNP_TS1 (PNP_GDT+0x10) /* transfer data segment */
+#define PNP_TS2 (PNP_GDT+0x18) /* another data segment */
/*
* These are some opcodes for a "static asmlinkage"
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/include/asm-i386/desc.h b/include/asm-i386/desc.h
--- a/include/asm-i386/desc.h 2002-08-07 21:27:54.000000000 +0200
+++ b/include/asm-i386/desc.h 2002-08-08 00:12:01.000000000 +0200
@@ -7,30 +7,31 @@
* The layout of the per-CPU GDT under Linux:
*
* 0 - null
- * 1 - TSS
- * 2 - kernel code segment
- * 3 - kernel data segment
- * 4 - user code segment <==== new cacheline
- * 5 - user data segment
- * 6 - Thread-Local Storage (TLS) segment #1
- * 7 - LDT
- * 8 - APM BIOS support <==== new cacheline
+ * 1 - PNPBIOS support (16->32 gate)
+ * 2 - boot code segment
+ * 3 - boot data segment
+ * 4 - PNPBIOS support <==== new cacheline
+ * 5 - PNPBIOS support
+ * 6 - PNPBIOS support
+ * 7 - PNPBIOS support
+ * 8 - APM BIOS support (0x400-0x1000)<==== new cacheline
* 9 - APM BIOS support
* 10 - APM BIOS support
- * 11 - APM BIOS support
- * 12 - PNPBIOS support <==== new cacheline
- * 13 - PNPBIOS support
- * 14 - PNPBIOS support
- * 15 - PNPBIOS support
- * 16 - PNPBIOS support <==== new cacheline
- * 17 - TLS segment #2
- * 18 - not used
- * 19 - not used
+ * 11 - APM BIOS support
+ * 12 - kernel code segment <==== new cacheline
+ * 13 - kernel data segment
+ * 14 - TSS
+ * 15 - LDT
+ * ------- start of user segments
+ * 16 - user code segment <==== new cacheline
+ * 17 - user data segment
+ * 18 - Thread-Local Storage (TLS) segment #1
+ * 19 - Thread-Local Storage (TLS) segment #2
*/
-#define TSS_ENTRY 1
-#define TLS_ENTRY1 6
-#define TLS_ENTRY2 17
-#define LDT_ENTRY 7
+#define TSS_ENTRY 14
+#define LDT_ENTRY 15
+#define TLS_ENTRY1 18
+#define TLS_ENTRY2 19
/*
* The interrupt descriptor table has room for 256 idt's,
* the global descriptor table is dependent on the number
diff --exclude-from=/home/ldb/src/linux-exclude -urNd a/include/asm-i386/segment.h b/include/asm-i386/segment.h
--- a/include/asm-i386/segment.h 2002-07-20 21:11:11.000000000 +0200
+++ b/include/asm-i386/segment.h 2002-08-07 23:50:08.000000000 +0200
@@ -1,10 +1,13 @@
#ifndef _ASM_SEGMENT_H
#define _ASM_SEGMENT_H
-#define __KERNEL_CS 0x10
-#define __KERNEL_DS 0x18
+#define __BOOT_CS 0x10
+#define __BOOT_DS 0x18
-#define __USER_CS 0x23
-#define __USER_DS 0x2B
+#define __KERNEL_CS 0x60
+#define __KERNEL_DS 0x68
+
+#define __USER_CS 0x83
+#define __USER_DS 0x8B
#endif
--=-h1r0v5j3ARmuM+F4a5mb
Content-Type: application/pgp-signature; name=signature.asc
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQA9UaDWdjkty3ft5+cRAuxQAKCRiKd3sk4GzBWffQKf3i+6+BXb/ACfU8uv
6MguXHKyqtu5HRdefR5wl6E=
=++SJ
-----END PGP SIGNATURE-----
--=-h1r0v5j3ARmuM+F4a5mb--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/