amd76x_pm hard hang with 2.4.19-ac4

Perry The Cynic (perry@cynic.org)
Fri, 09 Aug 2002 17:42:30 -0700


Trying out the amd76x_pm driver with 2.4.19-ac4 on a Tyan Thunder K7X
(S2468UGN) produces hard hangs under load. The system looks okay when idle,
but heavy Disk I/O (onboard SCSI, basically tar cfz) produces the hang
within a few minutes. (No hangs unless the amd76x_pm module is loaded.)

The board is otherwise quite stable (i.e. no unexplained
hangs/crashes/panics).

Any suggestions on how to approach this? The C2 idle loop code is what
changed for me (from 2.4.19pre10-ac2). But I don't know enough about ACPI
to know where to start... what info would help?

Oh, and this driver (while it works) shaves a full 140W off the power
consumption. Cool.

Thanks
-- perry
---------------------------------------------------------------------------
Perry The Cynic perry@cynic.org
To a blind optimist, an optimistic realist must seem like an Accursed Cynic.
---------------------------------------------------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/