./include/asm-alpha/dma.h
Add MAX_DMA_ADDR for SABLE and ALCOR
./include/asm-alpha/floppy.h
enable the full CROSS_64KB macro for all platforms
./include/asm-alpha/core_t2.h
fix HAE usage
./arch/alpha/kernel/pci.c
fiddle with quirk_cypress
./arch/alpha/kernel/traps.c
prevent opDEC_check() from multiple calls (EV4 SMP SABLEs)
./arch/alpha/kernel/proto.h
make t2_pci_tbi() real
./arch/alpha/kernel/time.c
shorten timeout delay
./arch/alpha/kernel/sys_alcor.c
use ALCOR_MAX_DMA_ADDR because of the 1GB limit on ISA devices
./arch/alpha/kernel/core_t2.c
add S/G support and allow direct-map to handle 2GB of memory
./arch/alpha/kernel/core_tsunami.c
rework alignment requirements for ISA DMA, esp. for ACER platforms
./arch/alpha/kernel/sys_sable.c
fix MAX_DMA_ADDR for the 1GB limitation
./arch/alpha/kernel/pci_impl.h
add T2_DEFAULT_MEM_BASE to help avoid HAE use
./arch/alpha/kernel/pci_iommu.c
fix ISA_DMA_MASK calculation, and force ISA alignment to 64KB
Ivan.
--- 2.5.33/arch/alpha/kernel/pci_iommu.c Sun Sep 1 02:05:35 2002
+++ linux/arch/alpha/kernel/pci_iommu.c Sat Sep 7 11:47:23 2002
@@ -30,6 +30,9 @@
#define DEBUG_NODIRECT 0
#define DEBUG_FORCEDAC 0
+/* Most Alphas support 32-bit ISA DMA. Exceptions are XL, Ruffian,
+ Nautilus, Sable, and Alcor (see asm-alpha/dma.h for details). */
+#define ISA_DMA_MASK (MAX_DMA_ADDRESS - IDENT_ADDR - 1)
static inline unsigned long
mk_iommu_pte(unsigned long paddr)
@@ -129,8 +132,8 @@ iommu_arena_find_pages(struct pci_iommu_
return p;
}
-long
-iommu_arena_alloc(struct pci_iommu_arena *arena, long n)
+static long
+iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
{
unsigned long flags;
unsigned long *ptes;
@@ -140,7 +143,7 @@ iommu_arena_alloc(struct pci_iommu_arena
/* Search for N empty ptes */
ptes = arena->ptes;
- mask = arena->align_entry - 1;
+ mask = max(align, arena->align_entry) - 1;
p = iommu_arena_find_pages(arena, n, mask);
if (p < 0) {
spin_unlock_irqrestore(&arena->lock, flags);
@@ -181,7 +184,7 @@ pci_map_single_1(struct pci_dev *pdev, v
int dac_allowed)
{
struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose;
- dma_addr_t max_dma = pdev ? pdev->dma_mask : 0x00ffffff;
+ dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
struct pci_iommu_arena *arena;
long npages, dma_ofs, i;
unsigned long paddr;
@@ -232,7 +235,8 @@ pci_map_single_1(struct pci_dev *pdev, v
arena = hose->sg_isa;
npages = calc_npages((paddr & ~PAGE_MASK) + size);
- dma_ofs = iommu_arena_alloc(arena, npages);
+ /* Force allocation to 64KB boundary for all ISA devices. */
+ dma_ofs = iommu_arena_alloc(arena, npages, pdev ? 8 : 0);
if (dma_ofs < 0) {
printk(KERN_WARNING "pci_map_single failed: "
"could not allocate dma page tables\n");
@@ -499,7 +503,7 @@ sg_fill(struct scatterlist *leader, stru
paddr &= ~PAGE_MASK;
npages = calc_npages(paddr + size);
- dma_ofs = iommu_arena_alloc(arena, npages);
+ dma_ofs = iommu_arena_alloc(arena, npages, 0);
if (dma_ofs < 0) {
/* If we attempted a direct map above but failed, die. */
if (leader->dma_address == 0)
@@ -588,7 +592,7 @@ pci_map_sg(struct pci_dev *pdev, struct
/* Second, figure out where we're going to map things. */
if (alpha_mv.mv_pci_tbi) {
hose = pdev ? pdev->sysdata : pci_isa_hose;
- max_dma = pdev ? pdev->dma_mask : 0x00ffffff;
+ max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
arena = hose->sg_pci;
if (!arena || arena->dma_base + arena->size - 1 > max_dma)
arena = hose->sg_isa;
@@ -651,7 +655,7 @@ pci_unmap_sg(struct pci_dev *pdev, struc
return;
hose = pdev ? pdev->sysdata : pci_isa_hose;
- max_dma = pdev ? pdev->dma_mask : 0x00ffffff;
+ max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK;
arena = hose->sg_pci;
if (!arena || arena->dma_base + arena->size - 1 > max_dma)
arena = hose->sg_isa;
--- 2.5.33/arch/alpha/kernel/core_t2.c Sat Sep 7 11:22:30 2002
+++ linux/arch/alpha/kernel/core_t2.c Sat Sep 7 11:49:08 2002
@@ -26,6 +26,18 @@
#include "proto.h"
#include "pci_impl.h"
+/*
+ * By default, we direct-map starting at 2GB, in order to allow the
+ * maximum size direct-map window (2GB) to match the maximum amount of
+ * memory (2GB) that can be present on SABLEs. But that limits the
+ * floppy to DMA only via the scatter/gather window set up for 8MB
+ * ISA DMA, since the maximum ISA DMA address is 2GB-1.
+ *
+ * For now, this seems a reasonable trade-off: even though most SABLEs
+ * have far less than even 1GB of memory, floppy usage/performance will
+ * not really be affected by forcing it to go via scatter/gather...
+ */
+#define T2_DIRECTMAP_2G 1
/*
* NOTE: Herein lie back-to-back mb instructions. They are magic.
@@ -282,6 +294,7 @@ void __init
t2_init_arch(void)
{
struct pci_controller *hose;
+ unsigned long t2_iocsr;
unsigned int i;
for (i = 0; i < NR_CPUS; i++) {
@@ -290,43 +303,80 @@ t2_init_arch(void)
}
#if 0
- {
- /* Set up error reporting. */
- unsigned long t2_err;
+ /* Set up error reporting. */
+ t2_iocsr = *(vulp)T2_IOCSR;
+ *(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 7); /* TLB error check */
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
+#endif
- t2_err = *(vulp)T2_IOCSR;
- t2_err |= (0x1 << 7); /* master abort */
- *(vulp)T2_IOCSR = t2_err;
- mb();
+ /* Enable scatter/gather TLB use. */
+ t2_iocsr = *(vulp)T2_IOCSR;
+ if (!(t2_iocsr & (0x1UL << 26))) {
+ printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
+ t2_iocsr);
+ *(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 26);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
}
-#endif
- printk("t2_init: HBASE was 0x%lx\n", *(vulp)T2_HBASE);
#if 0
- printk("t2_init: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
- *(vulp)T2_WBASE1,
- *(vulp)T2_WMASK1,
- *(vulp)T2_TBASE1);
- printk("t2_init: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
- *(vulp)T2_WBASE2,
- *(vulp)T2_WMASK2,
- *(vulp)T2_TBASE2);
+ printk("t2_init_arch: HBASE was 0x%lx\n", *(vulp)T2_HBASE);
+ printk("t2_init_arch: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
+ *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+ printk("t2_init_arch: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
+ *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
#endif
/*
+ * Create our single hose.
+ */
+
+ pci_isa_hose = hose = alloc_pci_controller();
+ hose->io_space = &ioport_resource;
+ hose->mem_space = &iomem_resource;
+ hose->index = 0;
+
+ hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
+ hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
+ hose->sparse_io_base = T2_IO - IDENT_ADDR;
+ hose->dense_io_base = 0;
+
+ /* Note we can only do 1 SG window, as the other is for direct, so
+ do an ISA SG area, especially for the floppy. */
+ hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
+ hose->sg_pci = NULL;
+
+ /*
* Set up the PCI->physical memory translation windows.
- * For now, window 2 is disabled. In the future, we may
- * want to use it to do scatter/gather DMA.
*
- * Window 1 goes at 1 GB and is 1 GB large.
+ * Window 1 goes at ? GB and is ?GB large, direct mapped.
+ * Window 2 goes at 8 MB and is 8MB large, scatter/gather (for ISA).
*/
- /* WARNING!! must correspond to the DMA_WIN params!!! */
+#if T2_DIRECTMAP_2G
+ __direct_map_base = 0x80000000UL;
+ __direct_map_size = 0x80000000UL;
+
+ /* WARNING!! must correspond to the direct map window params!!! */
+ *(vulp)T2_WBASE1 = 0x80080fffU;
+ *(vulp)T2_WMASK1 = 0x7ff00000U;
+ *(vulp)T2_TBASE1 = 0;
+#else /* T2_DIRECTMAP_2G */
+ __direct_map_base = 0x40000000UL;
+ __direct_map_size = 0x40000000UL;
+
+ /* WARNING!! must correspond to the direct map window params!!! */
*(vulp)T2_WBASE1 = 0x400807ffU;
*(vulp)T2_WMASK1 = 0x3ff00000U;
*(vulp)T2_TBASE1 = 0;
+#endif /* T2_DIRECTMAP_2G */
+
+ /* WARNING!! must correspond to the SG arena/window params!!! */
+ *(vulp)T2_WBASE2 = 0x008c000fU;
+ *(vulp)T2_WMASK2 = 0x00700000U;
+ *(vulp)T2_TBASE2 = virt_to_phys(hose->sg_isa->ptes) >> 1;
- *(vulp)T2_WBASE2 = 0x0;
*(vulp)T2_HBASE = 0x0;
/* Zero HAE. */
@@ -334,26 +384,28 @@ t2_init_arch(void)
*(vulp)T2_HAE_2 = 0; mb();
*(vulp)T2_HAE_3 = 0; mb();
#if 0
- *(vulp)T2_HAE_4 = 0; mb(); /* do not touch this */
+ *(vulp)T2_HAE_4 = 0; mb(); /* DO NOT TOUCH THIS!!! */
#endif
- /*
- * Create our single hose.
- */
+ t2_pci_tbi(hose, 0, -1); /* flush TLB all */
+}
- pci_isa_hose = hose = alloc_pci_controller();
- hose->io_space = &ioport_resource;
- hose->mem_space = &iomem_resource;
- hose->index = 0;
+void
+t2_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+ unsigned long t2_iocsr;
- hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
- hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
- hose->sparse_io_base = T2_IO - IDENT_ADDR;
- hose->dense_io_base = 0;
+ t2_iocsr = *(vulp)T2_IOCSR;
- hose->sg_isa = hose->sg_pci = NULL;
- __direct_map_base = 0x40000000;
- __direct_map_size = 0x40000000;
+ /* set the TLB Clear bit */
+ *(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 28);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
+
+ /* clear the TLB Clear bit */
+ *(vulp)T2_IOCSR = t2_iocsr & ~(0x1UL << 28);
+ mb();
+ *(vulp)T2_IOCSR; /* read it back to make sure */
}
#define SIC_SEIC (1UL << 33) /* System Event Clear */
--- 2.5.33/arch/alpha/kernel/core_tsunami.c Sat Sep 7 11:22:30 2002
+++ linux/arch/alpha/kernel/core_tsunami.c Sat Sep 7 11:49:08 2002
@@ -317,10 +317,17 @@ tsunami_init_one_pchip(tsunami_pchip *pc
* Window 0 is scatter-gather 8MB at 8MB (for isa)
* Window 1 is scatter-gather (up to) 1GB at 1GB
* Window 2 is direct access 2GB at 2GB
+ *
+ * NOTE: we need the align_entry settings for Acer devices on ES40,
+ * specifically floppy and IDE when memory is larger than 2GB.
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
+ /* Initially set for 4 PTEs, but will be overridden to 64K for ISA. */
+ hose->sg_isa->align_entry = 4;
+
hose->sg_pci = iommu_arena_new(hose, 0x40000000,
size_for_memory(0x40000000), 0);
+ hose->sg_pci->align_entry = 4; /* Tsunami caches 4 PTEs at a time */
__direct_map_base = 0x80000000;
__direct_map_size = 0x80000000;
--- 2.5.33/arch/alpha/kernel/pci.c Sun Sep 1 02:04:48 2002
+++ linux/arch/alpha/kernel/pci.c Sat Sep 7 11:50:46 2002
@@ -97,15 +97,22 @@ quirk_cypress(struct pci_dev *dev)
way to turn this off. The bridge also supports several extended
BIOS ranges (disabled after power-up), and some consoles do turn
them on. So if we use a large direct-map window, or a large SG
- window, we must avoid entire 0xfff00000-0xffffffff region. */
+ window, we must avoid the entire 0xfff00000-0xffffffff region. */
else if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
- if (__direct_map_base + __direct_map_size >= 0xfff00000)
- __direct_map_size = 0xfff00000 - __direct_map_base;
- else {
+#define DMAPSZ (max_low_pfn << PAGE_SHIFT) /* memory size, not window size */
+ if ((__direct_map_base + DMAPSZ - 1) >= 0xfff00000UL) {
+ __direct_map_size = 0xfff00000UL - __direct_map_base;
+ printk("%s: adjusting direct map size to 0x%x\n",
+ __FUNCTION__, __direct_map_size);
+ } else {
struct pci_controller *hose = dev->sysdata;
struct pci_iommu_arena *pci = hose->sg_pci;
- if (pci && pci->dma_base + pci->size >= 0xfff00000)
- pci->size = 0xfff00000 - pci->dma_base;
+ if (pci &&
+ (pci->dma_base + pci->size - 1) >= 0xfff00000UL) {
+ pci->size = 0xfff00000UL - pci->dma_base;
+ printk("%s: adjusting PCI S/G size to 0x%x\n",
+ __FUNCTION__, pci->size);
+ }
}
}
}
--- 2.5.33/arch/alpha/kernel/pci_impl.h Sun Sep 1 02:05:34 2002
+++ linux/arch/alpha/kernel/pci_impl.h Sat Sep 7 11:51:33 2002
@@ -52,15 +52,16 @@ struct pci_iommu_arena;
#define APECS_AND_LCA_DEFAULT_MEM_BASE ((16+2)*1024*1024)
/*
- * Because the MCPCIA core logic supports more bits for physical addresses,
- * it should allow an expanded range of SPARSE memory addresses.
- * However, we do not use them all, in order to avoid the HAE manipulation
- * that would be needed.
+ * Because MCPCIA and T2 core logic support more bits for
+ * physical addresses, they should allow an expanded range of SPARSE
+ * memory addresses. However, we do not use them all, in order to
+ * avoid the HAE manipulation that would be needed.
*/
#define MCPCIA_DEFAULT_MEM_BASE ((32+2)*1024*1024)
+#define T2_DEFAULT_MEM_BASE ((16+1)*1024*1024)
/*
- * Because CIA and PYXIS and T2 have more bits for physical addresses,
+ * Because CIA and PYXIS have more bits for physical addresses,
* they support an expanded range of SPARSE memory addresses.
*/
#define DEFAULT_MEM_BASE ((128+16)*1024*1024)
@@ -157,8 +158,6 @@ extern struct resource *alloc_resource(v
extern struct pci_iommu_arena *iommu_arena_new(struct pci_controller *,
dma_addr_t, unsigned long,
unsigned long);
-extern long iommu_arena_alloc(struct pci_iommu_arena *arena, long n);
-
extern const char *const pci_io_names[];
extern const char *const pci_mem_names[];
extern const char pci_hae0_name[];
--- 2.5.33/arch/alpha/kernel/proto.h Sun Sep 1 02:04:52 2002
+++ linux/arch/alpha/kernel/proto.h Sat Sep 7 11:49:08 2002
@@ -59,7 +59,7 @@ extern void polaris_machine_check(u64, u
extern struct pci_ops t2_pci_ops;
extern void t2_init_arch(void);
extern void t2_machine_check(u64, u64, struct pt_regs *);
-#define t2_pci_tbi ((void *)0)
+extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
/* core_titan.c */
extern struct pci_ops titan_pci_ops;
--- 2.5.33/arch/alpha/kernel/sys_alcor.c Sun Sep 1 02:04:59 2002
+++ linux/arch/alpha/kernel/sys_alcor.c Sat Sep 7 11:49:08 2002
@@ -251,7 +251,7 @@ struct alpha_machine_vector alcor_mv __i
DO_CIA_IO,
DO_CIA_BUS,
machine_check: cia_machine_check,
- max_dma_address: ALPHA_MAX_DMA_ADDRESS,
+ max_dma_address: ALPHA_ALCOR_MAX_DMA_ADDRESS,
min_io_address: EISA_DEFAULT_IO_BASE,
min_mem_address: CIA_DEFAULT_MEM_BASE,
--- 2.5.33/arch/alpha/kernel/sys_sable.c Sun Sep 1 02:04:49 2002
+++ linux/arch/alpha/kernel/sys_sable.c Sat Sep 7 11:49:08 2002
@@ -290,9 +290,9 @@ struct alpha_machine_vector sable_mv __i
DO_T2_IO,
DO_T2_BUS,
machine_check: t2_machine_check,
- max_dma_address: ALPHA_MAX_DMA_ADDRESS,
+ max_dma_address: ALPHA_SABLE_MAX_DMA_ADDRESS,
min_io_address: EISA_DEFAULT_IO_BASE,
- min_mem_address: DEFAULT_MEM_BASE,
+ min_mem_address: T2_DEFAULT_MEM_BASE,
nr_irqs: 40,
device_interrupt: sable_srm_device_interrupt,
@@ -322,9 +322,9 @@ struct alpha_machine_vector sable_gamma_
DO_T2_IO,
DO_T2_BUS,
machine_check: t2_machine_check,
- max_dma_address: ALPHA_MAX_DMA_ADDRESS,
+ max_dma_address: ALPHA_SABLE_MAX_DMA_ADDRESS,
min_io_address: EISA_DEFAULT_IO_BASE,
- min_mem_address: DEFAULT_MEM_BASE,
+ min_mem_address: T2_DEFAULT_MEM_BASE,
nr_irqs: 40,
device_interrupt: sable_srm_device_interrupt,
--- 2.5.33/arch/alpha/kernel/time.c Sun Sep 1 02:05:23 2002
+++ linux/arch/alpha/kernel/time.c Sat Sep 7 11:49:08 2002
@@ -185,8 +185,8 @@ validate_cc_value(unsigned long cc)
unsigned int min, max;
} cpu_hz[] __initdata = {
[EV3_CPU] = { 50000000, 200000000 }, /* guess */
- [EV4_CPU] = { 150000000, 300000000 },
- [LCA4_CPU] = { 150000000, 300000000 }, /* guess */
+ [EV4_CPU] = { 100000000, 300000000 },
+ [LCA4_CPU] = { 100000000, 300000000 }, /* guess */
[EV45_CPU] = { 200000000, 300000000 },
[EV5_CPU] = { 250000000, 433000000 },
[EV56_CPU] = { 333000000, 667000000 },
@@ -257,12 +257,12 @@ calibrate_cc_with_pic(void)
cc = rpcc();
do {
- count++;
+ count+=100; /* by 1 takes too long to timeout from 0 */
} while ((inb(0x61) & 0x20) == 0 && count > 0);
cc = rpcc() - cc;
/* Error: ECTCNEVERSET or ECPUTOOFAST. */
- if (count <= 1)
+ if (count <= 100)
return 0;
/* Error: ECPUTOOSLOW. */
--- 2.5.33/arch/alpha/kernel/traps.c Sun Sep 1 02:04:53 2002
+++ linux/arch/alpha/kernel/traps.c Sat Sep 7 11:49:08 2002
@@ -29,6 +29,7 @@
*/
static int opDEC_testing = 0;
static int opDEC_fix = 0;
+static int opDEC_checked = 0;
static unsigned long opDEC_test_pc = 0;
static void
@@ -36,6 +37,8 @@ opDEC_check(void)
{
unsigned long test_pc;
+ if (opDEC_checked) return;
+
lock_kernel();
opDEC_testing = 1;
@@ -48,6 +51,7 @@ opDEC_check(void)
: );
opDEC_testing = 0;
+ opDEC_checked = 1;
unlock_kernel();
}
--- 2.5.33/include/asm-alpha/core_t2.h Sun Sep 1 02:05:17 2002
+++ linux/include/asm-alpha/core_t2.h Sat Sep 7 11:49:08 2002
@@ -19,7 +19,7 @@
*
*/
-#define T2_MEM_R1_MASK 0x03ffffff /* Mem sparse region 1 mask is 26 bits */
+#define T2_MEM_R1_MASK 0x07ffffff /* Mem sparse region 1 mask is 26 bits */
/* GAMMA-SABLE is a SABLE with EV5-based CPUs */
#define _GAMMA_BIAS 0x8000000000UL
@@ -402,13 +402,17 @@ __EXTERN_INLINE void t2_outl(u32 b, unsi
*
*/
+#define t2_set_hae { \
+ msb = addr >> 27; \
+ addr &= T2_MEM_R1_MASK; \
+ set_hae(msb); \
+}
+
__EXTERN_INLINE u8 t2_readb(unsigned long addr)
{
unsigned long result, msb;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
result = *(vip) ((addr << 5) + T2_SPARSE_MEM + 0x00);
return __kernel_extbl(result, addr & 3);
@@ -418,9 +422,7 @@ __EXTERN_INLINE u16 t2_readw(unsigned lo
{
unsigned long result, msb;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
result = *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08);
return __kernel_extwl(result, addr & 3);
@@ -431,9 +433,7 @@ __EXTERN_INLINE u32 t2_readl(unsigned lo
{
unsigned long msb;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
return *(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18);
}
@@ -442,9 +442,7 @@ __EXTERN_INLINE u64 t2_readq(unsigned lo
{
unsigned long r0, r1, work, msb;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
work = (addr << 5) + T2_SPARSE_MEM + 0x18;
r0 = *(vuip)(work);
@@ -456,9 +454,7 @@ __EXTERN_INLINE void t2_writeb(u8 b, uns
{
unsigned long msb, w;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
w = __kernel_insbl(b, addr & 3);
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x00) = w;
@@ -468,9 +464,7 @@ __EXTERN_INLINE void t2_writew(u16 b, un
{
unsigned long msb, w;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
w = __kernel_inswl(b, addr & 3);
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x08) = w;
@@ -481,9 +475,7 @@ __EXTERN_INLINE void t2_writel(u32 b, un
{
unsigned long msb;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
*(vuip) ((addr << 5) + T2_SPARSE_MEM + 0x18) = b;
}
@@ -492,9 +484,7 @@ __EXTERN_INLINE void t2_writeq(u64 b, un
{
unsigned long msb, work;
- msb = addr & 0xE0000000;
- addr &= T2_MEM_R1_MASK;
- set_hae(msb);
+ t2_set_hae;
work = (addr << 5) + T2_SPARSE_MEM + 0x18;
*(vuip)work = b;
--- 2.5.33/include/asm-alpha/dma.h Sun Sep 1 02:05:31 2002
+++ linux/include/asm-alpha/dma.h Sat Sep 7 11:49:08 2002
@@ -75,34 +75,49 @@
#define MAX_DMA_CHANNELS 8
-/* The maximum address that we can perform a DMA transfer to on Alpha XL,
- due to a hardware SIO (PCI<->ISA bus bridge) chip limitation, is 64MB.
- See <asm/apecs.h> for more info.
+/*
+ ISA DMA limitations on Alpha platforms,
+
+ These may be due to SIO (PCI<->ISA bridge) chipset limitation, or
+ just a wiring limit.
+*/
+
+/* The maximum address for ISA DMA transfer on Alpha XL, due to an
+ hardware SIO limitation, is 64MB.
*/
-/* The maximum address that we can perform a DMA transfer to on RUFFIAN,
- due to a hardware SIO (PCI<->ISA bus bridge) chip limitation, is 16MB.
- See <asm/pyxis.h> for more info.
+#define ALPHA_XL_MAX_DMA_ADDRESS (IDENT_ADDR+0x04000000UL)
+
+/* The maximum address for ISA DMA transfer on RUFFIAN and NAUTILUS,
+ due to an hardware SIO limitation, is 16MB.
*/
-/* NOTE: we must define the maximum as something less than 64Mb, to prevent
- virt_to_bus() from returning an address in the first window, for a
- data area that goes beyond the 64Mb first DMA window. Sigh...
- We MUST coordinate the maximum with <asm/apecs.h> for consistency.
- For now, this limit is set to 48Mb...
+#define ALPHA_RUFFIAN_MAX_DMA_ADDRESS (IDENT_ADDR+0x01000000UL)
+#define ALPHA_NAUTILUS_MAX_DMA_ADDRESS (IDENT_ADDR+0x01000000UL)
+
+/* The maximum address for ISA DMA transfer on SABLE, and some ALCORs,
+ due to an hardware SIO chip limitation, is 2GB.
+*/
+#define ALPHA_SABLE_MAX_DMA_ADDRESS (IDENT_ADDR+0x80000000UL)
+#define ALPHA_ALCOR_MAX_DMA_ADDRESS (IDENT_ADDR+0x80000000UL)
+
+/*
+ Maximum address for all the others is the complete 32-bit bus
+ address space.
*/
-#define ALPHA_XL_MAX_DMA_ADDRESS (IDENT_ADDR+0x3000000UL)
-#define ALPHA_RUFFIAN_MAX_DMA_ADDRESS (IDENT_ADDR+0x1000000UL)
-#define ALPHA_NAUTILUS_MAX_DMA_ADDRESS (IDENT_ADDR+0x1000000UL)
-#define ALPHA_MAX_DMA_ADDRESS (~0UL)
+#define ALPHA_MAX_DMA_ADDRESS (IDENT_ADDR+0x100000000UL)
#ifdef CONFIG_ALPHA_GENERIC
# define MAX_DMA_ADDRESS (alpha_mv.max_dma_address)
#else
-# ifdef CONFIG_ALPHA_XL
+# if defined(CONFIG_ALPHA_XL)
# define MAX_DMA_ADDRESS ALPHA_XL_MAX_DMA_ADDRESS
# elif defined(CONFIG_ALPHA_RUFFIAN)
# define MAX_DMA_ADDRESS ALPHA_RUFFIAN_MAX_DMA_ADDRESS
# elif defined(CONFIG_ALPHA_NAUTILUS)
# define MAX_DMA_ADDRESS ALPHA_NAUTILUS_MAX_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_SABLE)
+# define MAX_DMA_ADDRESS ALPHA_SABLE_MAX_DMA_ADDRESS
+# elif defined(CONFIG_ALPHA_ALCOR)
+# define MAX_DMA_ADDRESS ALPHA_ALCOR_MAX_DMA_ADDRESS
# else
# define MAX_DMA_ADDRESS ALPHA_MAX_DMA_ADDRESS
# endif
--- 2.5.33/include/asm-alpha/floppy.h Sun Sep 1 02:05:34 2002
+++ linux/include/asm-alpha/floppy.h Sat Sep 7 11:49:08 2002
@@ -97,24 +97,21 @@ static int FDC2 = -1;
/*
* Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for XL and RUFFIAN. They are also the only one with DMA
- * limits, so we use that to test in the generic kernel.
+ * except for certain ones, like XL and RUFFIAN.
+ *
+ * However, the test is simple and fast, and this *is* floppy, after all,
+ * so we do it for all platforms, just to make sure.
+ *
+ * This is advantageous in other circumstances as well, as in moving
+ * about the PCI DMA windows and forcing the floppy to start doing
+ * scatter-gather when it never had before, and there *is* a problem
+ * on that platform... ;-}
*/
-#define __CROSS_64KB(a,s) \
+#define CROSS_64KB(a,s) \
({ unsigned long __s64 = (unsigned long)(a); \
unsigned long __e64 = __s64 + (unsigned long)(s) - 1; \
(__s64 ^ __e64) & ~0xfffful; })
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define CROSS_64KB(a,s) (__CROSS_64KB(a,s) && ~alpha_mv.max_dma_address)
-#else
-# if defined(CONFIG_ALPHA_XL) || defined(CONFIG_ALPHA_RUFFIAN) || defined(CONFIG_ALPHA_NAUTILUS)
-# define CROSS_64KB(a,s) __CROSS_64KB(a,s)
-# else
-# define CROSS_64KB(a,s) (0)
-# endif
-#endif
#define EXTRA_FLOPPY_PARAMS
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/