I resend these because for some unknown reason they don't seem to
have made it neither into the MARC archives nor into those at
www.cs.helsinki.fi
---------- Resent Message ----------
Subject: [PATCH] node affine NUMA scheduler 1/5
Date: Fri, 11 Oct 2002 19:54:30 +0200
Hi,
here comes the complete set of patches for the node affine NUMA
scheduler. It's made of several building blocks and one can make
several flavors of NUMA schedulers out of the patches.
The patches are:
01-numa_sched_core-2.5.39-10.patch :
Provides basic NUMA functionality. It implements CPU pools
with all the mess needed to initialize them. Also it has a
node aware find_busiest_queue() which first scans the own
node for more loaded CPUs. If no steal candidate is found on
the own node, it finds the most loaded node and tries to steal
a task from it. By steal delays for remote node steals it
tries to achieve equal node load. These delays can be extended
to cope with multi-level node hierarchies (that patch is not
included).
02-numa_sched_ilb-2.5.39-10.patch :
This patch provides simple initial load balancing during exec().
It is node aware and will select the least loaded node. Also it
does a round-robin initial node selection to distribute the load
better across the nodes.
03-node_affine-2.5.39-10.patch :
This is the heart of the node affine part of the patch. Tasks
are assigned a homenode during initial load balancing and they
are attracted to the homenode.
04-alloc_on_homenode.patch :
Coupling with the memory allocator: for user tasks allocate memory
from the homenode, no matter on which node the task is scheduled.
05-dynamic_homenode-2.5.39-10.patch :
Dynamic homenode selection. When pages are allocated or freed
they are tracked. The homenode is recalculated dynamically and
set to the node where most of the memory of the task is allocated.
Meaningfull combinations of patches are:
A : numa scheduler : 01 + 02 node aware NUMA scheduler, with initial loa=
d
balancing
B : node affine scheduler : 01 + 02 + 03 (+04)
C : node affine scheduler with dynamic homenode selection :
01 + 02 + 03 + 05 ( !exclude 04 !)
The best results should be provided by C as it incorporates most of
the features.
The patches should run on ia32 NUMAQ and ia64 Azusa (with the topology
patches applied). Other architectures just need the build_node() call
similar to arch/i386/kernel/smpboot.c The issues with NUMAQ (uninitialize=
d
platform specific stuff) should be solved.
Comments, flames, etc... welcome ;-)
Best regards,
Erich
--------------Boundary-00=_OIXYBNFH6NCXFE3JJ5OP
Content-Type: text/x-diff;
charset="iso-8859-15";
name="01-numa_sched_core-2.5.39-10.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="01-numa_sched_core-2.5.39-10.patch"
diff -urNp a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
--- a/arch/i386/kernel/smpboot.c Fri Sep 27 23:49:54 2002
+++ b/arch/i386/kernel/smpboot.c Fri Oct 11 14:47:53 2002
@@ -1194,6 +1194,9 @@ int __devinit __cpu_up(unsigned int cpu)
void __init smp_cpus_done(unsigned int max_cpus)
{
zap_low_mappings();
+#ifdef CONFIG_NUMA
+ build_pools();
+#endif
}
void __init smp_intr_init()
diff -urNp a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
--- a/arch/ia64/kernel/smpboot.c Tue Oct 8 15:04:54 2002
+++ b/arch/ia64/kernel/smpboot.c Fri Oct 11 14:47:25 2002
@@ -397,7 +397,7 @@ unsigned long cache_decay_ticks; /* # of
static void
smp_tune_scheduling (void)
{
- cache_decay_ticks = 10; /* XXX base this on PAL info and cache-bandwidth estimate */
+ cache_decay_ticks = 8; /* XXX base this on PAL info and cache-bandwidth estimate */
printk("task migration cache decay timeout: %ld msecs.\n",
(cache_decay_ticks + 1) * 1000 / HZ);
@@ -508,6 +508,9 @@ smp_cpus_done (unsigned int dummy)
printk(KERN_INFO"Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100);
+#ifdef CONFIG_NUMA
+ build_pools();
+#endif
}
int __devinit
diff -urNp a/include/linux/sched.h b/include/linux/sched.h
--- a/include/linux/sched.h Tue Oct 8 15:03:54 2002
+++ b/include/linux/sched.h Thu Oct 10 13:45:18 2002
@@ -22,6 +22,7 @@ extern unsigned long event;
#include <asm/mmu.h>
#include <linux/smp.h>
+#include <asm/topology.h>
#include <linux/sem.h>
#include <linux/signal.h>
#include <linux/securebits.h>
@@ -167,7 +168,6 @@ extern void update_one_process(struct ta
extern void scheduler_tick(int user_tick, int system);
extern unsigned long cache_decay_ticks;
-
#define MAX_SCHEDULE_TIMEOUT LONG_MAX
extern signed long FASTCALL(schedule_timeout(signed long timeout));
asmlinkage void schedule(void);
@@ -457,6 +457,13 @@ extern void set_cpus_allowed(task_t *p,
# define set_cpus_allowed(p, new_mask) do { } while (0)
#endif
+#ifdef CONFIG_NUMA
+extern void build_pools(void);
+extern void pooldata_lock(void);
+extern void pooldata_unlock(void);
+#endif
+extern void sched_migrate_task(task_t *p, int cpu);
+
extern void set_user_nice(task_t *p, long nice);
extern int task_prio(task_t *p);
extern int task_nice(task_t *p);
diff -urNp a/kernel/sched.c b/kernel/sched.c
--- a/kernel/sched.c Fri Sep 27 23:50:27 2002
+++ b/kernel/sched.c Fri Oct 11 19:08:32 2002
@@ -154,6 +154,9 @@ struct runqueue {
task_t *migration_thread;
struct list_head migration_queue;
+ unsigned long wait_time;
+ int wait_node;
+
} ____cacheline_aligned;
static struct runqueue runqueues[NR_CPUS] __cacheline_aligned;
@@ -174,6 +177,103 @@ static struct runqueue runqueues[NR_CPUS
#endif
/*
+ * Variables for describing and accessing processor pools. Using a
+ * compressed row format like notation. Processor pools are treated
+ * like logical node numbers.
+ *
+ * numpools: number of CPU pools (nodes),
+ * pool_cpus[]: CPUs in pools sorted by their pool ID,
+ * pool_ptr[pool]: index of first element in pool_cpus[] belonging to pool.
+ * pool_mask[]: cpu mask of a pool.
+ *
+ * Example: loop over all CPUs in a node:
+ * loop_over_node(i,cpu,node) {
+ * // "cpu" is set to each CPU in the node
+ * // "i" is needed as a loop index, should be of int type
+ * ...
+ * }
+ * <efocht@ess.nec.de>
+ */
+int numpools, pool_ptr[MAX_NUMNODES+1], pool_nr_cpus[MAX_NUMNODES];
+unsigned long pool_mask[MAX_NUMNODES];
+static spinlock_t pool_lock = SPIN_LOCK_UNLOCKED;
+#define cpu_to_node(cpu) __cpu_to_node(cpu)
+
+/* Avoid zeroes in integer divides for load calculations */
+#define BALANCE_FACTOR 100
+
+#ifdef CONFIG_NUMA
+int pool_cpus[NR_CPUS];
+#define POOL_DELAY_IDLE (1*HZ/1000)
+#define POOL_DELAY_BUSY (20*HZ/1000)
+#define loop_over_node(i,cpu,n) \
+ for(i=pool_ptr[n], cpu=pool_cpus[i]; i<pool_ptr[n+1]; i++, cpu=pool_cpus[i])
+
+void pooldata_lock(void)
+{
+ int i;
+ spin_lock(&pool_lock);
+ /*
+ * Wait a while, any loops using pool data should finish
+ * in between. This is VERY ugly and should be replaced
+ * by some real RCU stuff. [EF]
+ */
+ for (i=0; i<100; i++)
+ udelay(1000);
+}
+
+void pooldata_unlock(void)
+{
+ spin_unlock(&pool_lock);
+}
+
+#define pooldata_is_locked() spin_is_locked(&pool_lock)
+
+/*
+ * Call pooldata_lock() before calling this function and
+ * pooldata_unlock() after!
+ */
+void build_pools(void)
+{
+ int n, cpu, ptr, i;
+ unsigned long mask;
+
+ pooldata_lock();
+ ptr=0;
+ for (n=0; n<numnodes; n++) {
+ mask = pool_mask[n] = __node_to_cpu_mask(n) & cpu_online_map;
+ pool_ptr[n] = ptr;
+ for (cpu=0; cpu<NR_CPUS; cpu++)
+ if (mask & (1UL << cpu))
+ pool_cpus[ptr++] = cpu;
+ pool_nr_cpus[n] = ptr - pool_ptr[n];
+ }
+ numpools=numnodes;
+ pool_ptr[numpools]=ptr;
+ printk("CPU pools : %d\n",numpools);
+ for (n=0;n<numpools;n++) {
+ printk("pool %d :",n);
+ loop_over_node(i,cpu,n)
+ printk("%d ",cpu);
+ printk("\n");
+ }
+ if (cache_decay_ticks==1)
+ printk("WARNING: cache_decay_ticks=1, probably unset by platform. Running with poor CPU affinity!\n");
+#ifdef CONFIG_X86_NUMAQ
+ /* temporarilly set this to a reasonable value for NUMAQ */
+ cache_decay_ticks=8;
+#endif
+ pooldata_unlock();
+}
+
+#else
+#define POOL_DELAY_IDLE 0
+#define POOL_DELAY_BUSY 0
+#define loop_over_node(i,cpu,n) for(cpu=0; cpu<NR_CPUS; cpu++)
+#endif
+
+
+/*
* task_rq_lock - lock the runqueue a given task resides on and disable
* interrupts. Note the ordering: we can safely lookup the task_rq without
* explicitly disabling preemption.
@@ -632,121 +732,173 @@ static inline unsigned int double_lock_b
}
/*
- * find_busiest_queue - find the busiest runqueue.
- */
-static inline runqueue_t *find_busiest_queue(runqueue_t *this_rq, int this_cpu, int idle, int *imbalance)
-{
- int nr_running, load, max_load, i;
- runqueue_t *busiest, *rq_src;
-
- /*
- * We search all runqueues to find the most busy one.
- * We do this lockless to reduce cache-bouncing overhead,
- * we re-check the 'best' source CPU later on again, with
- * the lock held.
- *
- * We fend off statistical fluctuations in runqueue lengths by
- * saving the runqueue length during the previous load-balancing
- * operation and using the smaller one the current and saved lengths.
- * If a runqueue is long enough for a longer amount of time then
- * we recognize it and pull tasks from it.
- *
- * The 'current runqueue length' is a statistical maximum variable,
- * for that one we take the longer one - to avoid fluctuations in
- * the other direction. So for a load-balance to happen it needs
- * stable long runqueue on the target CPU and stable short runqueue
- * on the local runqueue.
- *
- * We make an exception if this CPU is about to become idle - in
- * that case we are less picky about moving a task across CPUs and
- * take what can be taken.
- */
- if (idle || (this_rq->nr_running > this_rq->prev_nr_running[this_cpu]))
- nr_running = this_rq->nr_running;
- else
- nr_running = this_rq->prev_nr_running[this_cpu];
-
- busiest = NULL;
- max_load = 1;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
-
- rq_src = cpu_rq(i);
- if (idle || (rq_src->nr_running < this_rq->prev_nr_running[i]))
+ * Calculate load of a CPU pool, return it in pool_load, return load
+ * of most loaded CPU in cpu_load.
+ * Return the index of the most loaded runqueue.
+ */
+static int calc_pool_load(int *pool_load, int *cpu_load, int this_cpu, int pool, int idle)
+{
+ runqueue_t *rq_src, *this_rq = cpu_rq(this_cpu);
+ int i, cpu, idx=-1, refload, load;
+
+ *pool_load = 0;
+ refload = -1;
+ loop_over_node(i, cpu, pool) {
+ if (!cpu_online(i)) continue;
+ rq_src = cpu_rq(cpu);
+ if (idle || (rq_src->nr_running < this_rq->prev_nr_running[cpu]))
load = rq_src->nr_running;
else
- load = this_rq->prev_nr_running[i];
- this_rq->prev_nr_running[i] = rq_src->nr_running;
+ load = this_rq->prev_nr_running[cpu];
+ this_rq->prev_nr_running[cpu] = rq_src->nr_running;
+ *pool_load += load;
+ if (load > refload) {
+ idx = cpu;
+ refload = load;
+ }
+ }
+ *pool_load = *pool_load * BALANCE_FACTOR / pool_nr_cpus[pool];
+ return idx;
+}
- if ((load > max_load) && (rq_src != this_rq)) {
- busiest = rq_src;
- max_load = load;
+#ifdef CONFIG_NUMA
+/*
+ * Scan the load of all pools/nodes, find the most loaded one and the
+ * most loaded CPU on it. Returns:
+ * -1 : if no steal should occur,
+ * cpu number : steal should by attempted from the given cpu.
+ *
+ * This routine implements node balancing by delaying steals from remote
+ * nodes more if the own node is (within margins) averagely loaded. The
+ * most loaded node is remembered as well as the time (jiffies). In the
+ * following calls to the load_balancer the time is compared with
+ * POOL_DELAY_BUSY (if load is around the average) or POOL_DELAY_IDLE (if own
+ * node is unloaded) if the most loaded node didn't change. This gives less
+ * loaded nodes the chance to approach the average load but doesn't exclude
+ * busy nodes from stealing (just in case the cpus_allowed mask isn't good
+ * for the idle nodes).
+ * This concept can be extended easilly to more than two levels (multi-level
+ * scheduler), e.g.: CPU -> node -> supernode... by implementing node-distance
+ * dependent steal delays.
+ * <efocht@ess.nec.de>
+ */
+static inline
+int scan_other_pools(int *max_cpu_load, int this_pool_load,
+ int this_pool, int this_cpu, int idle)
+{
+ int i, imax, max_pool_load, max_pool_idx, best_cpu=-1;
+ int pool, pool_load, cpu_load, steal_delay, avg_load;
+ runqueue_t *this_rq = cpu_rq(this_cpu);
+
+#define POOLS_BALANCED(comp,this) (((comp) -(this)) < 50)
+ best_cpu = -1;
+ max_pool_load = this_pool_load;
+ max_pool_idx = this_pool;
+ avg_load = max_pool_load * pool_nr_cpus[this_pool];
+ for (i = 1; i < numpools; i++) {
+ pool = (i + this_pool) % numpools;
+ imax = calc_pool_load(&pool_load, &cpu_load, this_cpu, pool, idle);
+ avg_load += pool_load*pool_nr_cpus[pool];
+ if (pool_load > max_pool_load) {
+ max_pool_load = pool_load;
+ *max_cpu_load = cpu_load;
+ max_pool_idx = pool;
+ best_cpu = imax;
}
}
+ /* Exit if not enough imbalance on any remote node. */
+ if ((best_cpu < 0) || (max_pool_load <= 100) ||
+ POOLS_BALANCED(max_pool_load,this_pool_load)) {
+ this_rq->wait_node = -1;
+ return -1;
+ }
+ avg_load /= num_online_cpus();
+ /* Wait longer before stealing if own pool's load is average. */
+ if (POOLS_BALANCED(avg_load,this_pool_load))
+ steal_delay = POOL_DELAY_BUSY;
+ else
+ steal_delay = POOL_DELAY_IDLE;
+ /* if we have a new most loaded node: just mark it */
+ if (this_rq->wait_node != max_pool_idx) {
+ this_rq->wait_node = max_pool_idx;
+ this_rq->wait_time = jiffies;
+ return -1;
+ } else
+ /* old most loaded node: check if waited enough */
+ if (jiffies - this_rq->wait_time < steal_delay)
+ return -1;
+ return best_cpu;
+}
+#endif
- if (likely(!busiest))
- goto out;
+/*
+ * Find a runqueue from which to steal a task. We try to do this as locally as
+ * possible because we don't want to let tasks get far from their node.
+ * This is done in two steps:
+ * 1. First try to find a runqueue within the own CPU pool (AKA node) with
+ * imbalance larger than 25% (relative to the current runqueue).
+ * 2. If the local node is well balanced, locate the most loaded node and its
+ * most loaded CPU. This is handled in scan_other_pools().
+ * <efocht@ess.nec.de>
+ */
+static inline runqueue_t *find_busiest_queue(int this_cpu, int idle, int *nr_running)
+{
+ runqueue_t *busiest = NULL, *this_rq = cpu_rq(this_cpu);
+ int best_cpu, max_cpu_load;
+ int this_pool, this_pool_load;
- *imbalance = (max_load - nr_running) / 2;
+ /* Need at least ~25% imbalance to trigger balancing. */
+#define CPUS_BALANCED(m,t) (((m) <= 1) || (((m) - (t))/2 < (((m) + (t))/2 + 3)/4))
- /* It needs an at least ~25% imbalance to trigger balancing. */
- if (!idle && (*imbalance < (max_load + 3)/4)) {
- busiest = NULL;
- goto out;
- }
+ if (idle || (this_rq->nr_running > this_rq->prev_nr_running[this_cpu]))
+ *nr_running = this_rq->nr_running;
+ else
+ *nr_running = this_rq->prev_nr_running[this_cpu];
- nr_running = double_lock_balance(this_rq, busiest, this_cpu, idle, nr_running);
- /*
- * Make sure nothing changed since we checked the
- * runqueue length.
- */
- if (busiest->nr_running <= nr_running + 1) {
- spin_unlock(&busiest->lock);
- busiest = NULL;
+ this_pool = (numpools == 1 ? 0 : cpu_to_node(this_cpu));
+ best_cpu = calc_pool_load(&this_pool_load, &max_cpu_load, this_cpu, this_pool, idle);
+ if (best_cpu != this_cpu)
+ if (!CPUS_BALANCED(max_cpu_load,*nr_running)) {
+ busiest = cpu_rq(best_cpu);
+ this_rq->wait_node = -1;
+ goto out;
+ }
+#ifdef CONFIG_NUMA
+ if (numpools > 1) {
+ best_cpu = scan_other_pools(&max_cpu_load, this_pool_load, this_pool, this_cpu, idle);
+ if ((best_cpu >= 0) &&
+ (!CPUS_BALANCED(max_cpu_load,*nr_running))) {
+ busiest = cpu_rq(best_cpu);
+ this_rq->wait_node = -1;
+ }
}
-out:
+#endif
+ out:
return busiest;
}
/*
- * pull_task - move a task from a remote runqueue to the local runqueue.
- * Both runqueues must be locked.
+ * Find a task to steal from the busiest RQ. The busiest->lock must be held
+ * while calling this routine.
*/
-static inline void pull_task(runqueue_t *src_rq, prio_array_t *src_array, task_t *p, runqueue_t *this_rq, int this_cpu)
+static inline task_t *task_to_steal(runqueue_t *busiest, int this_cpu)
{
- dequeue_task(p, src_array);
- src_rq->nr_running--;
- set_task_cpu(p, this_cpu);
- this_rq->nr_running++;
- enqueue_task(p, this_rq->active);
- /*
- * Note that idle threads have a prio of MAX_PRIO, for this test
- * to be always true for them.
- */
- if (p->prio < this_rq->curr->prio)
- set_need_resched();
-}
-
-/*
- * Current runqueue is empty, or rebalance tick: if there is an
- * inbalance (current runqueue is too short) then pull from
- * busiest runqueue(s).
- *
- * We call this with the current runqueue locked,
- * irqs disabled.
- */
-static void load_balance(runqueue_t *this_rq, int idle)
-{
- int imbalance, idx, this_cpu = smp_processor_id();
- runqueue_t *busiest;
+ int idx;
+ task_t *next = NULL, *tmp;
prio_array_t *array;
struct list_head *head, *curr;
- task_t *tmp;
+ int weight, maxweight=0;
- busiest = find_busiest_queue(this_rq, this_cpu, idle, &imbalance);
- if (!busiest)
- goto out;
+ /*
+ * We do not migrate tasks that are:
+ * 1) running (obviously), or
+ * 2) cannot be migrated to this CPU due to cpus_allowed.
+ */
+
+#define CAN_MIGRATE_TASK(p,rq,this_cpu) \
+ ((jiffies - (p)->sleep_timestamp > cache_decay_ticks) && \
+ p != rq->curr && \
+ ((p)->cpus_allowed & (1UL<<(this_cpu))))
/*
* We first consider expired tasks. Those will likely not be
@@ -772,7 +924,7 @@ skip_bitmap:
array = busiest->active;
goto new_array;
}
- goto out_unlock;
+ goto out;
}
head = array->queue + idx;
@@ -780,33 +932,74 @@ skip_bitmap:
skip_queue:
tmp = list_entry(curr, task_t, run_list);
+ if (CAN_MIGRATE_TASK(tmp, busiest, this_cpu)) {
+ weight = (jiffies - tmp->sleep_timestamp)/cache_decay_ticks;
+ if (weight > maxweight) {
+ maxweight = weight;
+ next = tmp;
+ }
+ }
+ curr = curr->next;
+ if (curr != head)
+ goto skip_queue;
+ idx++;
+ goto skip_bitmap;
+
+ out:
+ return next;
+}
+
+/*
+ * pull_task - move a task from a remote runqueue to the local runqueue.
+ * Both runqueues must be locked.
+ */
+static inline void pull_task(runqueue_t *src_rq, prio_array_t *src_array, task_t *p, runqueue_t *this_rq, int this_cpu)
+{
+ dequeue_task(p, src_array);
+ src_rq->nr_running--;
+ set_task_cpu(p, this_cpu);
+ this_rq->nr_running++;
+ enqueue_task(p, this_rq->active);
/*
- * We do not migrate tasks that are:
- * 1) running (obviously), or
- * 2) cannot be migrated to this CPU due to cpus_allowed, or
- * 3) are cache-hot on their current CPU.
+ * Note that idle threads have a prio of MAX_PRIO, for this test
+ * to be always true for them.
*/
+ if (p->prio < this_rq->curr->prio)
+ set_need_resched();
+}
-#define CAN_MIGRATE_TASK(p,rq,this_cpu) \
- ((jiffies - (p)->sleep_timestamp > cache_decay_ticks) && \
- !task_running(rq, p) && \
- ((p)->cpus_allowed & (1UL << (this_cpu))))
-
- curr = curr->prev;
-
- if (!CAN_MIGRATE_TASK(tmp, busiest, this_cpu)) {
- if (curr != head)
- goto skip_queue;
- idx++;
- goto skip_bitmap;
- }
- pull_task(busiest, array, tmp, this_rq, this_cpu);
- if (!idle && --imbalance) {
- if (curr != head)
- goto skip_queue;
- idx++;
- goto skip_bitmap;
- }
+/*
+ * Current runqueue is empty, or rebalance tick: if there is an
+ * inbalance (current runqueue is too short) then pull from
+ * busiest runqueue(s).
+ *
+ * We call this with the current runqueue locked,
+ * irqs disabled.
+ */
+static void load_balance(runqueue_t *this_rq, int idle)
+{
+ int nr_running, this_cpu = task_cpu(this_rq->curr);
+ task_t *tmp;
+ runqueue_t *busiest;
+
+ /* avoid deadlock by timer interrupt on own cpu */
+ if (pooldata_is_locked()) return;
+ busiest = find_busiest_queue(this_cpu, idle, &nr_running);
+ if (!busiest)
+ goto out;
+
+ nr_running = double_lock_balance(this_rq, busiest, this_cpu, idle, nr_running);
+ /*
+ * Make sure nothing changed since we checked the
+ * runqueue length.
+ */
+ if (busiest->nr_running <= nr_running + 1)
+ goto out_unlock;
+
+ tmp = task_to_steal(busiest, this_cpu);
+ if (!tmp)
+ goto out_unlock;
+ pull_task(busiest, tmp->array, tmp, this_rq, this_cpu);
out_unlock:
spin_unlock(&busiest->lock);
out:
@@ -819,10 +1012,10 @@ out:
* frequency and balancing agressivity depends on whether the CPU is
* idle or not.
*
- * busy-rebalance every 250 msecs. idle-rebalance every 1 msec. (or on
+ * busy-rebalance every 200 msecs. idle-rebalance every 1 msec. (or on
* systems with HZ=100, every 10 msecs.)
*/
-#define BUSY_REBALANCE_TICK (HZ/4 ?: 1)
+#define BUSY_REBALANCE_TICK (HZ/5 ?: 1)
#define IDLE_REBALANCE_TICK (HZ/1000 ?: 1)
static inline void idle_tick(runqueue_t *rq)
@@ -1920,6 +2113,8 @@ typedef struct {
struct list_head list;
task_t *task;
struct completion done;
+ int cpu_dest;
+ int sync;
} migration_req_t;
/*
@@ -1965,6 +2160,7 @@ void set_cpus_allowed(task_t *p, unsigne
}
init_completion(&req.done);
req.task = p;
+ req.sync = 1;
list_add(&req.list, &rq->migration_queue);
task_rq_unlock(rq, &flags);
wake_up_process(rq->migration_thread);
@@ -1974,6 +2170,17 @@ out:
preempt_enable();
}
+void sched_migrate_task(task_t *p, int dest_cpu)
+{
+ unsigned long old_mask;
+
+ old_mask = p->cpus_allowed;
+ if (!(old_mask & (1UL << dest_cpu)))
+ return;
+ set_cpus_allowed(p, 1UL << dest_cpu);
+ set_cpus_allowed(p, old_mask);
+}
+
/*
* migration_thread - this is a highprio system thread that performs
* thread migration by 'pulling' threads into the target runqueue.
@@ -2009,7 +2216,7 @@ static int migration_thread(void * data)
for (;;) {
runqueue_t *rq_src, *rq_dest;
struct list_head *head;
- int cpu_src, cpu_dest;
+ int cpu_src, cpu_dest, sync;
migration_req_t *req;
unsigned long flags;
task_t *p;
@@ -2024,10 +2231,17 @@ static int migration_thread(void * data)
}
req = list_entry(head->next, migration_req_t, list);
list_del_init(head->next);
- spin_unlock_irqrestore(&rq->lock, flags);
p = req->task;
- cpu_dest = __ffs(p->cpus_allowed);
+ sync = req->sync;
+ if (sync)
+ cpu_dest = __ffs(p->cpus_allowed & cpu_online_map);
+ else {
+ cpu_dest = req->cpu_dest;
+ req->task = NULL;
+ }
+ spin_unlock_irqrestore(&rq->lock, flags);
+
rq_dest = cpu_rq(cpu_dest);
repeat:
cpu_src = task_cpu(p);
@@ -2050,7 +2264,8 @@ repeat:
double_rq_unlock(rq_src, rq_dest);
local_irq_restore(flags);
- complete(&req->done);
+ if (sync)
+ complete(&req->done);
}
}
@@ -2129,7 +2344,17 @@ void __init sched_init(void)
// delimiter for bitsearch
__set_bit(MAX_PRIO, array->bitmap);
}
+#ifdef CONFIG_NUMA
+ pool_cpus[i] = i;
+#endif
}
+ numpools = 1;
+ pool_ptr[0] = 0;
+ pool_ptr[1] = NR_CPUS;
+ pool_mask[0] = -1L;
+ pool_nr_cpus[0] = NR_CPUS;
+ if (cache_decay_ticks)
+ cache_decay_ticks=1;
/*
* We have to do a little magic to get the first
* thread right in SMP mode.
--------------Boundary-00=_OIXYBNFH6NCXFE3JJ5OP--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/