Summary:
serial driver related modules.
- change IO port address and IRQ number.
- add new PNP device entry.
- add register definition for new serial driver.
diffstat:
drivers/serial/8250_cs.c | 1 +
drivers/serial/8250_pnp.c | 7 +++++++
drivers/serial/Config.in | 10 ++++++++++
drivers/serial/Makefile | 6 +++++-
include/asm-i386/serial.h | 18 ++++++++++++++++++
include/linux/serial.h | 13 +++++++++++++
include/linux/serialP.h | 5 +++++
include/linux/serial_core.h | 9 +++++++++
include/linux/serial_reg.h | 43 +++++++++++++++++++++++++++++++++++++++++++
9 files changed, 111 insertions(+), 1 deletion(-)
patch:
diff -urN linux/drivers/serial/Config.in linux98/drivers/serial/Config.in
--- linux/drivers/serial/Config.in Sat Oct 12 13:21:31 2002
+++ linux98/drivers/serial/Config.in Sun Oct 13 19:44:24 2002
@@ -12,12 +12,22 @@
dep_bool ' Console on 8250/16550 and compatible serial port (EXPERIMENTAL)' CONFIG_SERIAL_8250_CONSOLE $CONFIG_SERIAL_8250 $CONFIG_EXPERIMENTAL
dep_tristate ' 8250/16550 PCMCIA device support' CONFIG_SERIAL_8250_CS $CONFIG_PCMCIA $CONFIG_SERIAL_8250
+if [ "$CONFIG_PC9800" != "y" ]; then
dep_mbool 'Extended 8250/16550 serial driver options' CONFIG_SERIAL_8250_EXTENDED $CONFIG_SERIAL_8250
dep_bool ' Support more than 4 serial ports' CONFIG_SERIAL_8250_MANY_PORTS $CONFIG_SERIAL_8250_EXTENDED
dep_bool ' Support for sharing serial interrupts' CONFIG_SERIAL_8250_SHARE_IRQ $CONFIG_SERIAL_8250_EXTENDED
dep_bool ' Autodetect IRQ on standard ports (unsafe)' CONFIG_SERIAL_8250_DETECT_IRQ $CONFIG_SERIAL_8250_EXTENDED
dep_bool ' Support special multiport boards' CONFIG_SERIAL_8250_MULTIPORT $CONFIG_SERIAL_8250_EXTENDED
dep_bool ' Support RSA serial ports' CONFIG_SERIAL_8250_RSA $CONFIG_SERIAL_8250_EXTENDED
+else # CONFIG_PC9800=y
+dep_mbool 'NEC PC-9801 primary serial port support (EXPERIMENTAL)' CONFIG_SERIAL_PC9800 $CONFIG_SERIAL_8250
+dep_bool ' Support MC16550II (EXPERIMENTAL)' CONFIG_MC16550II $CONFIG_SERIAL_PC9800
+if [ "$CONFIG_MC16550II" = "y" ]; then
+ comment ' MC16550II COM2, COM3 '
+ int ' MC16550II shared IRQ (3, 5, 6, 12)' CONFIG_MC16550II_IRQ 3
+ hex ' MC16550II base address (d0,d2,d4,d6,d8,da,dc,de)' CONFIG_MC16550II_BASE d2
+fi
+fi
comment 'Non-8250 serial port support'
diff -urN linux/drivers/serial/Makefile linux98/drivers/serial/Makefile
--- linux/drivers/serial/Makefile Wed Oct 16 13:20:41 2002
+++ linux98/drivers/serial/Makefile Wed Oct 16 15:31:48 2002
@@ -4,14 +4,18 @@
# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
#
-export-objs := core.o 8250.o suncore.o
+export-objs := core.o 8250.o suncore.o serial98.o
serial-8250-y :=
serial-8250-$(CONFIG_PCI) += 8250_pci.o
serial-8250-$(CONFIG_ISAPNP) += 8250_pnp.o
obj-$(CONFIG_SERIAL_CORE) += core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
+ifneq ($(CONFIG_SERIAL_PC9800),y)
obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
+else
+obj-$(CONFIG_SERIAL_8250) += serial98.o $(serial-8250-y)
+endif
obj-$(CONFIG_SERIAL_8250_CS) += 8250_cs.o
obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o
diff -urN linux/drivers/serial/8250_cs.c linux98/drivers/serial/8250_cs.c
--- linux/drivers/serial/8250_cs.c Thu Jul 25 06:03:28 2002
+++ linux98/drivers/serial/8250_cs.c Thu Jul 25 15:48:59 2002
@@ -307,6 +307,7 @@
serial.port = port;
serial.irq = irq;
serial.flags = ASYNC_SKIP_TEST | ASYNC_SHARE_IRQ;
+ serial.baud_base = 230400;
line = register_serial(&serial);
if (line < 0) {
printk(KERN_NOTICE "serial_cs: register_serial() at 0x%04lx,"
diff -urN linux/drivers/serial/8250_pnp.c linux98/drivers/serial/8250_pnp.c
--- linux/drivers/serial/8250_pnp.c Sat Oct 12 13:21:04 2002
+++ linux98/drivers/serial/8250_pnp.c Sun Oct 13 21:02:23 2002
@@ -187,6 +187,8 @@
{ "MVX00A1", 0 },
/* PC Rider K56 Phone System PnP */
{ "MVX00F2", 0 },
+ /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
+ { "nEC8241", 0 },
/* Pace 56 Voice Internal Plug & Play Modem */
{ "PMC2430", 0 },
/* Generic */
@@ -379,7 +381,12 @@
((port->min == 0x2f8) ||
(port->min == 0x3f8) ||
(port->min == 0x2e8) ||
+#ifndef CONFIG_PC9800
(port->min == 0x3e8)))
+#else
+ (port->min == 0x3e8) ||
+ (port->min == 0x8b0)))
+#endif
return 0;
}
diff -urN linux/include/asm-i386/serial.h linux98/include/asm-i386/serial.h
--- linux/include/asm-i386/serial.h Mon Apr 15 04:18:51 2002
+++ linux98/include/asm-i386/serial.h Wed Apr 17 10:37:22 2002
@@ -50,14 +50,22 @@
#define C_P(card,port) (((card)<<6|(port)<<3) + 1)
+#ifndef CONFIG_PC9800
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \
{ 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \
{ 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \
{ 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */
+#else
+#define STD_SERIAL_PORT_DEFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x30, 4, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x238, 5, STD_COM_FLAGS }, /* ttyS1 */
+#endif /* CONFIG_PC9800 */
+#ifndef CONFIG_PC9800
#ifdef CONFIG_SERIAL_MANY_PORTS
#define EXTRA_SERIAL_PORT_DEFNS \
{ 0, BASE_BAUD, 0x1A0, 9, FOURPORT_FLAGS }, /* ttyS4 */ \
@@ -91,6 +99,16 @@
#else
#define EXTRA_SERIAL_PORT_DEFNS
#endif
+#else /* CONFIG_PC9800 */
+#ifdef CONFIG_MC16550II
+#define EXTRA_SERIAL_PORT_DEFNS \
+ /* MC16550II */ \
+ { 0, BASE_BAUD*4, CONFIG_MC16550II_BASE, CONFIG_MC16550II_IRQ, STD_COM_FLAGS }, /* ttyS2 */ \
+ { 0, BASE_BAUD*4, CONFIG_MC16550II_BASE+0x800, CONFIG_MC16550II_IRQ, STD_COM_FLAGS }, /* ttyS3 */
+#else
+#define EXTRA_SERIAL_PORT_DEFNS
+#endif
+#endif /* CONFIG_PC9800 */
/* You can have up to four HUB6's in the system, but I've only
* included two cards here for a total of twelve ports.
diff -urN linux/include/linux/serial.h linux98/include/linux/serial.h
--- linux/include/linux/serial.h Mon Sep 16 11:18:23 2002
+++ linux98/include/linux/serial.h Mon Sep 16 16:21:38 2002
@@ -10,6 +10,8 @@
#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H
+#include <linux/config.h>
+
#ifdef __KERNEL__
#include <asm/page.h>
@@ -75,11 +77,22 @@
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13 /* RSA-DV II/S card */
+#ifndef CONFIG_PC9800
#define PORT_MAX 13
+#else
+#define PORT_8251 14
+#define PORT_8251_19K 15
+#define PORT_8251_FIFO 16
+#define PORT_8251_VFAST 17
+#define PORT_MC16550II 18
+#define PORT_MAX 18
+#endif
#define SERIAL_IO_PORT 0
#define SERIAL_IO_HUB6 1
#define SERIAL_IO_MEM 2
+#define SERIAL_IO_8251 3
+#define SERIAL_IO_MC16550II 4
struct serial_uart_config {
char *name;
diff -urN linux/include/linux/serialP.h linux98/include/linux/serialP.h
--- linux/include/linux/serialP.h Tue Oct 8 10:56:20 2002
+++ linux98/include/linux/serialP.h Tue Oct 8 11:01:42 2002
@@ -20,6 +20,7 @@
*/
#include <linux/config.h>
+#include <linux/version.h>
#include <linux/termios.h>
#include <linux/workqueue.h>
#include <linux/circ_buf.h>
@@ -75,6 +76,10 @@
int MCR; /* Modem control register */
int LCR; /* Line control register */
int ACR; /* 16950 Additional Control Reg. */
+#ifdef CONFIG_PC9800
+ int cmd8251;
+ int msr8251;
+#endif
unsigned long event;
unsigned long last_active;
int line;
diff -urN linux/include/linux/serial_core.h linux98/include/linux/serial_core.h
--- linux/include/linux/serial_core.h Sun Aug 11 10:41:20 2002
+++ linux98/include/linux/serial_core.h Wed Aug 21 16:26:45 2002
@@ -37,7 +37,16 @@
#define PORT_16654 11
#define PORT_16850 12
#define PORT_RSA 13
+#ifndef CONFIG_PC9800
#define PORT_MAX_8250 13 /* max port ID */
+#else
+#define PORT_8251 14
+#define PORT_8251_19K 15
+#define PORT_8251_FIFO 16
+#define PORT_8251_VFAST 17
+#define PORT_MC16550II 18
+#define PORT_MAX_8250 18 /* max port ID */
+#endif
/*
* ARM specific type numbers. These are not currently guaranteed
diff -urN linux/include/linux/serial_reg.h linux98/include/linux/serial_reg.h
--- linux/include/linux/serial_reg.h Wed May 2 08:05:00 2001
+++ linux98/include/linux/serial_reg.h Fri Aug 17 22:15:12 2001
@@ -14,6 +14,8 @@
#ifndef _LINUX_SERIAL_REG_H
#define _LINUX_SERIAL_REG_H
+#include <linux/config.h>
+
#define UART_RX 0 /* In: Receive buffer (DLAB=0) */
#define UART_TX 0 /* Out: Transmit buffer (DLAB=0) */
#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
@@ -229,6 +231,47 @@
#define UART_TRG_120 0x78
#define UART_TRG_128 0x80
+#ifdef CONFIG_PC9800
+
+#define RX_8251F 0x130 /* In: Receive buffer */
+#define TX_8251F 0x130 /* Out: Transmit buffer */
+#define LSR_8251F 0x132 /* In: Line Status Register */
+#define MSR_8251F 0x134 /* In: Modem Status Register */
+#define IIR_8251F 0x136 /* In: Interrupt ID Register */
+#define FCR_8251F 0x138 /* I/O: FIFO Control Register */
+#define IER2_8251F 0x138 /* I/O: Interrupt Enable Register */
+#define VFAST_8251F 0x13a /* I/O: VFAST mode Register */
+
+#define COMMAND_8251F 0x32 /* Out: 8251 Command Resister */
+#define IER1_8251F 0x35 /* I/O: Interrupt Enable Register */
+#define IER1_8251F_COUT 0x37 /* Out: Interrupt Enable Register */
+
+#define COMMAND_8251F_DUMMY 0 /* Dummy Command */
+#define COMMAND_8251F_RESET 0x40 /* Reset Command */
+
+#define VFAST_ENABLE 0x80 /* V.Fast mode Enable */
+
+/* Interrupt Reason */
+#define INTR_8251_TXRE 4
+#define INTR_8251_TXEE 2
+#define INTR_8251_RXRE 1
+/* I/O Port */
+#define PORT_8251_DATA 0
+#define PORT_8251_CMD 2
+#define PORT_8251_MOD 2
+#define PORT_8251_STS 2
+/* status in */
+#define STAT_8251_TXRDY 1
+#define STAT_8251_RXRDY 2
+#define STAT_8251_TXEMP 4
+#define STAT_8251_PER 8
+#define STAT_8251_OER 16
+#define STAT_8251_FER 32
+#define STAT_8251_BRK 64
+#define STAT_8251_DSR 128
+
+#endif /* CONFIG_PC9800 */
+
/*
* These definitions are for the RSA-DV II/S card, from
*
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/