Note that for 2.5 ewrk3 still needs VDA's cli/sti removal patch, which I will
send along in a separate mail along with some other cleanups.
This has been tested on an SMP x86 box containing 3 DE205 NICs.
--Adam
--- /home/adk0212/linus-2.5/drivers/net/ewrk3.c Fri Oct 18 16:12:25 2002
+++ linux-2.5.43-mm1/drivers/net/ewrk3.c Fri Oct 18 21:55:44 2002
@@ -135,8 +135,8 @@
0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c
0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com>
0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net>
- 0.46 10-Oct-02 cli/sti removal <VDA@port.imtp.ilyichevsk.odessa.ua>
- Multiple NIC support when module <akropel1@rochester.rr.com>
+ 0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com>
+ 0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com>
=========================================================================
*/
@@ -161,6 +161,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
+#include <linux/ethtool.h>
#include <linux/time.h>
#include <linux/types.h>
@@ -169,8 +170,11 @@
#include "ewrk3.h"
+#define DRV_NAME "ewrk3"
+#define DRV_VERSION "0.47"
+
static char version[] __initdata =
-"ewrk3.c:v0.46 2002/10/09 davies@maniac.ultranet.com\n";
+DRV_NAME ":v" DRV_VERSION " 2002/10/17 davies@maniac.ultranet.com\n";
#ifdef EWRK3_DEBUG
static int ewrk3_debug = EWRK3_DEBUG;
@@ -278,6 +282,7 @@
u_char hard_strapped; /* Don't allow a full open */
u_char txc; /* Transmit cut through */
u_char *mctbl; /* Pointer to the multicast table */
+ u_char led_mask; /* Used to reserve LED access for ethtool */
spinlock_t hw_lock;
};
@@ -533,6 +538,7 @@
lp->shmem_length = shmem_length;
lp->lemac = lemac;
lp->hard_strapped = hard_strapped;
+ lp->led_mask = CR_LED;
spin_lock_init(&lp->hw_lock);
lp->mPage = 64;
@@ -903,7 +909,7 @@
DISABLE_IRQs;
cr = inb(EWRK3_CR);
- cr |= CR_LED;
+ cr |= lp->led_mask;
outb(cr, EWRK3_CR);
if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */
@@ -928,7 +934,7 @@
}
/* Unmask the EWRK3 board interrupts and turn off the LED */
- cr &= ~CR_LED;
+ cr &= ~(lp->led_mask);
outb(cr, EWRK3_CR);
ENABLE_IRQs;
spin_unlock(&lp->hw_lock);
@@ -1624,6 +1630,195 @@
return status; /* return the device name string */
}
+static int ewrk3_ethtool_ioctl(struct net_device *dev, void *useraddr)
+{
+ struct ewrk3_private *lp = (struct ewrk3_private *) dev->priv;
+ u_long iobase = dev->base_addr;
+ u32 ethcmd;
+
+ if (get_user(ethcmd, (u32 *)useraddr))
+ return -EFAULT;
+
+ switch (ethcmd) {
+
+ /* Get driver info */
+ case ETHTOOL_GDRVINFO: {
+ struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
+ int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL);
+
+ strcpy(info.driver, DRV_NAME);
+ strcpy(info.version, DRV_VERSION);
+ sprintf(info.fw_version, "%d", fwrev);
+ strcpy(info.bus_info, "N/A");
+ info.eedump_len = EEPROM_MAX;
+ if (copy_to_user(useraddr, &info, sizeof(info)))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* Get settings */
+ case ETHTOOL_GSET: {
+ struct ethtool_cmd ecmd = { ETHTOOL_GSET };
+ u_char cr = inb(EWRK3_CR);
+
+ switch (lp->adapter_name[4]) {
+ case '3': /* DE203 */
+ ecmd.supported = SUPPORTED_BNC;
+ ecmd.port = PORT_BNC;
+ break;
+
+ case '4': /* DE204 */
+ ecmd.supported = SUPPORTED_TP;
+ ecmd.port = PORT_TP;
+ break;
+
+ case '5': /* DE205 */
+ ecmd.supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI;
+ ecmd.autoneg = !(cr & CR_APD);
+ /*
+ ** Port is only valid if autoneg is disabled
+ ** and even then we don't know if AUI is jumpered.
+ */
+ if (!ecmd.autoneg)
+ ecmd.port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP;
+ break;
+ }
+
+ ecmd.supported |= SUPPORTED_10baseT_Half;
+ ecmd.speed = SPEED_10;
+ ecmd.duplex = DUPLEX_HALF;
+
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* Set settings */
+ case ETHTOOL_SSET: {
+ struct ethtool_cmd ecmd;
+ u_char cr;
+ u_long flags;
+
+ /* DE205 is the only card with anything to set */
+ if (lp->adapter_name[4] != '5')
+ return -EOPNOTSUPP;
+
+ if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
+ return -EFAULT;
+
+ /* Sanity-check parameters */
+ if (ecmd.speed != SPEED_10)
+ return -EINVAL;
+ if (ecmd.port != PORT_TP && ecmd.port != PORT_BNC)
+ return -EINVAL; /* AUI is not software-selectable */
+ if (ecmd.transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd.duplex != DUPLEX_HALF)
+ return -EINVAL;
+ if (ecmd.phy_address != 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ cr = inb(EWRK3_CR);
+
+ /* If Autoneg is set, change to Auto Port mode */
+ /* Otherwise, disable Auto Port and set port explicitly */
+ if (ecmd.autoneg) {
+ cr &= ~CR_APD;
+ } else {
+ cr |= CR_APD;
+ if (ecmd.port == PORT_TP)
+ cr &= ~CR_PSEL; /* Force TP */
+ else
+ cr |= CR_PSEL; /* Force BNC */
+ }
+
+ /* Commit the changes */
+ outb(cr, EWRK3_CR);
+
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* Get link status */
+ case ETHTOOL_GLINK: {
+ struct ethtool_value edata = { ETHTOOL_GLINK };
+ u_char cmr = inb(EWRK3_CMR);
+
+ /* DE203 has BNC only and link status does not apply */
+ if (lp->adapter_name[4] == '3')
+ return -EOPNOTSUPP;
+
+ /* On DE204 this is always valid since TP is the only port. */
+ /* On DE205 this reflects TP status even if BNC or AUI is selected. */
+ edata.data = !(cmr & CMR_LINK);
+
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ return 0;
+ }
+
+ /* Blink LED for identification */
+ case ETHTOOL_PHYS_ID: {
+ struct ethtool_value edata;
+ u_long flags;
+ long delay, ret;
+ u_char cr;
+ int count;
+ wait_queue_head_t wait;
+
+ init_waitqueue_head(&wait);
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+
+ /* Toggle LED 4x per second */
+ delay = HZ >> 2;
+ count = edata.data << 2;
+
+ spin_lock_irqsave(&lp->hw_lock, flags);
+
+ /* Bail if a PHYS_ID is already in progress */
+ if (lp->led_mask == 0) {
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ return -EBUSY;
+ }
+
+ /* Prevent ISR from twiddling the LED */
+ lp->led_mask = 0;
+
+ while (count--) {
+ /* Toggle the LED */
+ cr = inb(EWRK3_CR);
+ outb(cr ^ CR_LED, EWRK3_CR);
+
+ /* Wait a little while */
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ ret = delay;
+ __wait_event_interruptible_timeout(wait, 0, ret);
+ spin_lock_irqsave(&lp->hw_lock, flags);
+
+ /* Exit if we got a signal */
+ if (ret == -ERESTARTSYS)
+ goto out;
+ }
+
+ ret = 0;
+out:
+ lp->led_mask = CR_LED;
+ cr = inb(EWRK3_CR);
+ outb(cr & ~CR_LED, EWRK3_CR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ return ret;
+ }
+
+ }
+
+ return -EOPNOTSUPP;
+}
+
/*
** Perform IOCTL call functions here. Some are privileged operations and the
** effective uid is checked in those cases.
@@ -1642,6 +1837,10 @@
union ewrk3_addr *tmp;
+ /* ethtool IOCTLs are handled elsewhere */
+ if (cmd == SIOCETHTOOL)
+ return ewrk3_ethtool_ioctl(dev, (void *)rq->ifr_data);
+
tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL);
if(tmp==NULL)
return -ENOMEM;
@@ -1854,7 +2053,7 @@
#ifdef MODULE
static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S];
static int ndevs;
-static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
+static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, }; /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
static int irq[MAX_NUM_EWRK3S+1] = { 5, 0, }; /* or use the insmod io= irq= options */
/* '21' below should really be 'MAX_NUM_EWRK3S' */
@@ -1895,8 +2094,7 @@
{
int i;
- for( i=0; i<ndevs; i++ )
- {
+ for( i=0; i<ndevs; i++ ) {
unregister_netdev(ewrk3_devs[i]);
if (ewrk3_devs[i]->priv) {
kfree(ewrk3_devs[i]->priv);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/