PC-9800 patch for 2.5.47-ac4: not merged yet (13/15) SCSI

Osamu Tomita (tomita@cinet.co.jp)
Fri, 15 Nov 2002 22:04:21 +0900


This is a multi-part message in MIME format.
--------------92D974D51036339FF7506161
Content-Type: text/plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit

This is for SCSI host cards support.

diffstat:
drivers/scsi/Kconfig | 7 +
drivers/scsi/Makefile | 3
drivers/scsi/pc980155.c | 262 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/pc980155.h | 47 +++++++
drivers/scsi/pc980155regs.h | 89 ++++++++++++++
drivers/scsi/scsi_scan.c | 1
drivers/scsi/scsi_syms.c | 5
drivers/scsi/scsicam.c | 68 +++++++++++
drivers/scsi/sd.c | 24 +++-
drivers/scsi/wd33c93.c | 57 ++++++---
drivers/scsi/wd33c93.h | 5
include/scsi/scsicam.h | 2
12 files changed, 548 insertions(+), 22 deletions(-)

-- 
Osamu Tomita
tomita@cinet.co.jp
--------------92D974D51036339FF7506161
Content-Type: text/plain; charset=iso-2022-jp;
 name="scsi.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="scsi.patch"

diff -urN linux/drivers/scsi/Kconfig linux98/drivers/scsi/Kconfig --- linux/drivers/scsi/Kconfig Mon Nov 11 15:46:15 2002 +++ linux98/drivers/scsi/Kconfig Mon Nov 11 16:53:06 2002 @@ -1729,6 +1729,13 @@ see the picture at <http://amiga.multigraph.com/photos/oktagon.html>. +config SCSI_PC980155 + tristate "NEC PC-9801-55 SCSI support" + depends on PC9800 && SCSI + help + If you have the NEC PC-9801-55 SCSI interface card or compatibles + for NEC PC-9801/PC-9821, say Y. + # bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI # bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI endmenu diff -urN linux/drivers/scsi/Makefile linux98/drivers/scsi/Makefile --- linux/drivers/scsi/Makefile Sat Oct 19 13:02:28 2002 +++ linux98/drivers/scsi/Makefile Tue Oct 29 15:45:44 2002 @@ -18,7 +18,7 @@ CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM -export-objs := scsi_syms.o 53c700.o +export-objs := scsi_syms.o 53c700.o wd33c93.o subdir-$(CONFIG_PCMCIA) += pcmcia @@ -31,6 +31,7 @@ obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o +obj-$(CONFIG_SCSI_PC980155) += pc980155.o wd33c93.o obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o diff -urN linux/drivers/scsi/pc980155.c linux98/drivers/scsi/pc980155.c --- linux/drivers/scsi/pc980155.c Thu Jan 1 09:00:00 1970 +++ linux98/drivers/scsi/pc980155.c Sun Feb 3 12:08:14 2002 @@ -0,0 +1,262 @@ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/blk.h> +#include <linux/sched.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/ioport.h> + +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <linux/module.h> + +#include "scsi.h" +#include "hosts.h" +#include "wd33c93.h" +#include "pc980155.h" +#include "pc980155regs.h" + +#define DEBUG + +#include<linux/stat.h> + +static inline void __print_debug_info(unsigned int); +static inline void __print_debug_info(unsigned int a){} +#define print_debug_info() __print_debug_info(base_io); + +#define NR_BASE_IOS 4 +static int nr_base_ios = NR_BASE_IOS; +static unsigned int base_ios[NR_BASE_IOS] = {0xcc0, 0xcd0, 0xce0, 0xcf0}; +static unsigned int SASR; +static unsigned int SCMD; +static wd33c93_regs regs = {&SASR, &SCMD}; + +static struct Scsi_Host *pc980155_host = NULL; + +static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp); + +inline void pc980155_dma_enable(unsigned int base_io){ + outb(0x01, REG_CWRITE); + WAIT(); +} +inline void pc980155_dma_disable(unsigned int base_io){ + outb(0x02, REG_CWRITE); + WAIT(); +} + + +static void pc980155_intr_handle(int irq, void *dev_id, struct pt_regs *regp) +{ + wd33c93_intr(pc980155_host); +} + +static int dma_setup(Scsi_Cmnd *sc, int dir_in){ + /* + * sc->SCp.this_residual : transfer count + * sc->SCp.ptr : distination address (virtual address) + * dir_in : data direction (DATA_OUT_DIR:0 or DATA_IN_DIR:1) + * + * if success return 0 + */ + + /* + * DMA WRITE MODE + * bit 7,6 01b single mode (this mode only) + * bit 5 inc/dec (default:0 = inc) + * bit 4 auto initialize (normaly:0 = off) + * bit 3,2 01b memory -> io + * 10b io -> memory + * 00b verify + * bit 1,0 channel + */ + disable_dma(sc->host->dma_channel); + set_dma_mode(sc->host->dma_channel, 0x40 | (dir_in ? 0x04 : 0x08)); + clear_dma_ff(sc->host->dma_channel); + set_dma_addr(sc->host->dma_channel, virt_to_phys(sc->SCp.ptr)); + set_dma_count(sc->host->dma_channel, sc->SCp.this_residual); +#if 0 +#ifdef DEBUG + printk("D%d(%x)D", sc->SCp.this_residual); +#endif +#endif + enable_dma(sc->host->dma_channel); + + pc980155_dma_enable(sc->host->io_port); + + return 0; +} + +static void dma_stop(struct Scsi_Host *instance, Scsi_Cmnd *sc, int status){ + /* + * instance: Hostadapter's instance + * sc: scsi command + * status: True if success + */ + + pc980155_dma_disable(sc->host->io_port); + + disable_dma(sc->host->dma_channel); +} + +/* return non-zero on detection */ +static inline int pc980155_test_port(wd33c93_regs regs) +{ + /* Quick and dirty test for presence of the card. */ + if (READ_AUX_STAT() == 0xff) + return 0; + return 1; +} + +static inline int +pc980155_getconfig(unsigned int base_io, wd33c93_regs regs, + unsigned char* irq, unsigned char* dma, + unsigned char* scsi_id) +{ + static unsigned char irqs[] = { 3, 5, 6, 9, 12, 13 }; + unsigned char result; + + printk(KERN_DEBUG "PC-9801-55: base_io=%x SASR=%x SCMD=%x\n", + base_io, *regs.SASR, *regs.SCMD); + result = read_wd33c93(regs, WD_RESETINT); + printk(KERN_DEBUG "PC-9801-55: getting config (%x)\n", result); + *scsi_id = result & 0x07; + *irq = (result >> 3) & 0x07; + if (*irq > 5) { + printk(KERN_ERR "PC-9801-55 (base %#x): impossible IRQ (%d)" + " - other device here?\n", base_io, *irq); + return 0; + } + + *irq = irqs[*irq]; + result = inb(REG_STATRD); + WAIT(); + *dma = result & 0x03; + if (*dma == 1) { + printk(KERN_ERR + "PC-9801-55 (base %#x): impossible DMA channl (%d)" + " - other device here?\n", base_io, *dma); + return 0; + } +#ifdef DEBUG + printk("PC-9801-55: end of getconfig\n"); +#endif + return 1; +} + +/* return non-zero on detection */ +int scsi_pc980155_detect(Scsi_Host_Template* tpnt) +{ + unsigned int base_io; + unsigned char irq, dma, scsi_id; + int i; +#ifdef DEBUG + unsigned char debug; +#endif + + for (i = 0; i < nr_base_ios; i++) { + base_io = base_ios[i]; + SASR = REG_ADDRST; + SCMD = REG_CONTRL; + + /* printk("PC-9801-55: SASR(%x = %x)\n", SASR, REG_ADDRST); */ + if (check_region(base_io, 6)) + continue; + if (! pc980155_test_port(regs)) + continue; + + if (!pc980155_getconfig(base_io, regs, &irq, &dma, &scsi_id)) + continue; +#ifdef DEBUG + printk("PC-9801-55: config: base io = %x, irq = %d, dma channel = %d, scsi id = %d\n", + base_io, irq, dma, scsi_id); +#endif + if (request_irq(irq, pc980155_intr_handle, 0, "PC-9801-55", + NULL)) { + printk(KERN_ERR + "PC-9801-55: unable to allocate IRQ %d\n", + irq); + continue; + } + if (request_dma(dma, "PC-9801-55")) { + printk(KERN_ERR "PC-9801-55: " + "unable to allocate DMA channel %d\n", dma); + free_irq(irq, NULL); + continue; + } + + request_region(base_io, 6, "PC-9801-55"); + pc980155_host = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); + pc980155_host->this_id = scsi_id; + pc980155_host->io_port = base_io; + pc980155_host->n_io_port = 6; + pc980155_host->irq = irq; + pc980155_host->dma_channel = dma; + +#ifdef DEBUG + printk("PC-9801-55: scsi host found at %x irq = %d, use dma channel %d.\n", base_io, irq, dma); + debug = read_aux_stat(regs); + printk("PC-9801-55: aux: %x ", debug); + debug = read_wd33c93(regs, 0x17); + printk("status: %x\n", debug); +#endif + + pc980155_int_enable(regs); + + wd33c93_init(pc980155_host, regs, dma_setup, dma_stop, + WD33C93_FS_12_15); + + return 1; + } + + printk("PC-9801-55: not found\n"); + return 0; +} + +int pc980155_proc_info(char *buf, char **start, off_t off, int len, + int hostno, int in) +{ + /* NOT SUPPORTED YET! */ + + if (in) { + return -EPERM; + } + *start = buf; + return sprintf(buf, "Sorry, not supported yet.\n"); +} + +int pc980155_setup(char *str) +{ +next: + if (!strncmp(str, "io:", 3)){ + base_ios[0] = simple_strtoul(str+3,NULL,0); + nr_base_ios = 1; + while (*str > ' ' && *str != ',') + str++; + if (*str == ','){ + str++; + goto next; + } + } + return 0; +} + +int scsi_pc980155_release(struct Scsi_Host *pc980155_host) +{ +#ifdef MODULE + pc980155_int_disable(regs); + release_region(pc980155_host->io_port, pc980155_host->n_io_port); + free_irq(pc980155_host->irq, NULL); + free_dma(pc980155_host->dma_channel); + wd33c93_release(); +#endif + return 1; +} + +__setup("pc980155=", pc980155_setup); + +Scsi_Host_Template driver_template = SCSI_PC980155; + +#include "scsi_module.c" diff -urN linux/drivers/scsi/pc980155.h linux98/drivers/scsi/pc980155.h --- linux/drivers/scsi/pc980155.h Thu Jan 1 09:00:00 1970 +++ linux98/drivers/scsi/pc980155.h Sat Nov 2 17:51:18 2002 @@ -0,0 +1,47 @@ +/* + * PC-9801-55 SCSI host adapter driver + * + * Copyright (C) 1997-2000 Kyoto University Microcomputer Club + * (Linux/98 project) + */ + +#ifndef _SCSI_PC9801_55_H +#define _SCSI_PC9801_55_H + +#include <linux/types.h> +#include <linux/kdev_t.h> +#include <scsi/scsicam.h> + +int wd33c93_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); +int wd33c93_abort(Scsi_Cmnd *); +int wd33c93_reset(Scsi_Cmnd *, unsigned int); +int scsi_pc980155_detect(Scsi_Host_Template *); +int scsi_pc980155_release(struct Scsi_Host *); +int pc980155_proc_info(char *, char **, off_t, int, int, int); + +#ifndef CMD_PER_LUN +#define CMD_PER_LUN 2 +#endif + +#ifndef CAN_QUEUE +#define CAN_QUEUE 16 +#endif + +#define SCSI_PC980155 { .proc_name = "PC-9801-55", \ + .name = "SCSI PC-9801-55", \ + .proc_info = pc980155_proc_info, \ + .detect = scsi_pc980155_detect, \ + .release = scsi_pc980155_release, \ + /* command: use queue command */ \ + .queuecommand = wd33c93_queuecommand, \ + /* .abort = wd33c93_abort, */ \ + /* .reset = wd33c93_reset, */ \ + .bios_param = pc9800_scsi_bios_param, \ + .can_queue = CAN_QUEUE, \ + .this_id = 7, \ + .sg_tablesize = SG_ALL, \ + .cmd_per_lun = CMD_PER_LUN, /* dont use link command */ \ + .unchecked_isa_dma = 1, /* use dma **XXXX***/ \ + .use_clustering = ENABLE_CLUSTERING } + +#endif /* _SCSI_PC9801_55_H */ diff -urN linux/drivers/scsi/pc980155regs.h linux98/drivers/scsi/pc980155regs.h --- linux/drivers/scsi/pc980155regs.h Thu Jan 1 09:00:00 1970 +++ linux98/drivers/scsi/pc980155regs.h Mon Dec 3 18:44:10 2001 @@ -0,0 +1,89 @@ +#ifndef __PC980155REGS_H +#define __PC980155REGS_H + +#include "wd33c93.h" + +#define REG_ADDRST (base_io+0) +#define REG_CONTRL (base_io+2) +#define REG_CWRITE (base_io+4) +#define REG_STATRD (base_io+4) + +#define WD_MEMORYBANK 0x30 +#define WD_RESETINT 0x33 + +#if 0 +#define WAIT() outb(0x00,0x5f) +#else +#define WAIT() do{}while(0) +#endif + +static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num) +{ + uchar data; + outb(reg_num, *regs.SASR); + WAIT(); + data = inb(*regs.SCMD); + WAIT(); + return data; +} + +static inline uchar read_aux_stat(const wd33c93_regs regs) +{ + uchar result; + result = inb(*regs.SASR); + WAIT(); + /* printk("PC-9801-55: regp->SASR(%x) = %x\n", regp->SASR, result); */ + return result; +} +#define READ_AUX_STAT() read_aux_stat(regs) + +static inline void write_wd33c93(const wd33c93_regs regs, uchar reg_num, + uchar value) +{ + outb(reg_num, *regs.SASR); + WAIT(); + outb(value, *regs.SCMD); + WAIT(); +} + + +#define write_wd33c93_cmd(regs,cmd) write_wd33c93(regs,WD_COMMAND,cmd) + +static inline void write_wd33c93_count(const wd33c93_regs regs, + unsigned long value) +{ + outb(WD_TRANSFER_COUNT_MSB, *regs.SASR); + WAIT(); + outb((value >> 16) & 0xff, *regs.SCMD); + WAIT(); + outb((value >> 8) & 0xff, *regs.SCMD); + WAIT(); + outb( value & 0xff, *regs.SCMD); + WAIT(); +} + + +static inline unsigned long read_wd33c93_count(const wd33c93_regs regs) +{ +unsigned long value; + + outb(WD_TRANSFER_COUNT_MSB, *regs.SASR); + value = inb(*regs.SCMD) << 16; + value |= inb(*regs.SCMD) << 8; + value |= inb(*regs.SCMD); + return value; +} + +static inline void write_wd33c93_cdb(const wd33c93_regs regs, unsigned int len, + unsigned char cmnd[]) +{ + int i; + outb(WD_CDB_1, *regs.SASR); + for (i=0; i<len; i++) + outb(cmnd[i], *regs.SCMD); +} + +#define pc980155_int_enable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) | 0x04) +#define pc980155_int_disable(regs) write_wd33c93(regs, WD_MEMORYBANK, read_wd33c93(regs, WD_MEMORYBANK) & ~0x04) + +#endif diff -urN linux/drivers/scsi/scsi_scan.c linux98/drivers/scsi/scsi_scan.c --- linux/drivers/scsi/scsi_scan.c Wed Aug 28 09:52:26 2002 +++ linux98/drivers/scsi/scsi_scan.c Wed Aug 28 13:09:39 2002 @@ -131,6 +131,7 @@ {"MITSUMI", "CD-R CR-2201CS", "6119", BLIST_NOLUN}, /* locks up */ {"RELISYS", "Scorpio", NULL, BLIST_NOLUN}, /* responds to all lun */ {"MICROTEK", "ScanMaker II", "5.61", BLIST_NOLUN}, /* responds to all lun */ + {"NEC", "D3856", "0009", BLIST_NOLUN}, /* * Other types of devices that have special flags. diff -urN linux/drivers/scsi/scsi_syms.c linux98/drivers/scsi/scsi_syms.c --- linux/drivers/scsi/scsi_syms.c Mon Nov 11 15:46:17 2002 +++ linux98/drivers/scsi/scsi_syms.c Mon Nov 11 16:53:06 2002 @@ -98,6 +98,11 @@ EXPORT_SYMBOL(scsi_host_put); EXPORT_SYMBOL(scsi_device_types); +/* For PC-9800 architecture support */ +EXPORT_SYMBOL(pc9800_scsi_bios_param); +extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *); +EXPORT_SYMBOL(sd_find_params_by_bdev); + /* * Externalize timers so that HBAs can safely start/restart commands. */ diff -urN linux/drivers/scsi/scsicam.c linux98/drivers/scsi/scsicam.c --- linux/drivers/scsi/scsicam.c Thu Oct 31 09:43:00 2002 +++ linux98/drivers/scsi/scsicam.c Sat Nov 2 22:19:46 2002 @@ -57,6 +57,11 @@ { unsigned char *p; int ret; + extern int pc98; /* whether PC-9800 or not. */ + + if (pc98) + if (!pc9800_scsi_bios_param(bdev, capacity, ip)) + return 0; p = scsi_bios_ptable(bdev); if (!p) @@ -240,3 +245,66 @@ *hds = (unsigned int) heads; return (rv); } + +#include <asm/pc9800.h> + +/* XXX - For now, we assume the first (i.e. having the least host_no) + real (i.e. non-emulated) host adapter shall be BIOS-controlled one. + We *SHOULD* invent another way. */ + +static inline struct Scsi_Host *first_real_host(void) +{ + struct Scsi_Host *h = NULL; + + while ((h = scsi_host_get_next(h))) + if (!h->hostt->emulated) + break; + + return h; +} + +extern struct scsi_device *sd_find_params_by_bdev(struct block_device *, char **, sector_t *); + +int pc9800_scsi_bios_param(struct block_device *bdev, sector_t capacity, int *ip) +{ + char *name; + struct scsi_device *device = sd_find_params_by_bdev(bdev, &name, NULL); + + if (device && first_real_host() == device->host && device->id < 7 + && __PC9800SCA_TEST_BIT(PC9800SCA_DISK_EQUIPS, device->id)) + { + const u8 *p = (&__PC9800SCA(u8, PC9800SCA_SCSI_PARAMS) + + device->id * 4); + + ip[0] = p[1]; /* # of heads */ + ip[1] = p[0]; /* # of sectors/track */ + ip[2] = *(u16 *)&p[2] & 0x0FFF; /* # of cylinders */ + if (p[3] & (1 << 6)) { /* #-of-cylinders is 16-bit */ + ip[2] |= (ip[0] & 0xF0) << 8; + ip[0] &= 0x0F; + } + printk(KERN_INFO "%s: " + "BIOS parameters CHS:%d/%d/%d, %u bytes %s sector\n", + name, ip[2], ip[0], ip[1], 256 << ((p[3] >> 4) & 3), + p[3] & 0x80 ? "hard" : "soft"); + return 0; + } + + /* Assume PC-9801-92 compatible parameters for HAs without BIOS. */ + ip[0] = 8; + ip[1] = 32; + ip[2] = capacity / (8 * 32); + if (ip[2] > 65535) { /* if capacity >= 8GB */ + /* Recent on-board adapters seem to use this parameter. */ + ip[1] = 128; + ip[2] = capacity / (8 * 128); + if (ip[2] > 65535) { /* if capacity >= 32GB */ + /* Clip the number of cylinders. Currently this + is the limit that we deal with. */ + ip[2] = 65535; + } + } + printk(KERN_INFO "%s: BIOS parameters CHS:%d/%d/%d (assumed)\n", + name, ip[2], ip[0], ip[1]); + return 0; +} diff -urN linux/drivers/scsi/sd.c linux98/drivers/scsi/sd.c --- linux/drivers/scsi/sd.c Mon Nov 11 15:46:17 2002 +++ linux98/drivers/scsi/sd.c Mon Nov 11 16:53:06 2002 @@ -196,6 +196,7 @@ case HDIO_GETGEO: /* Return BIOS disk parameters */ { struct hd_geometry *loc = (struct hd_geometry *)arg; + extern int pc98; if (!loc) return -EINVAL; @@ -211,7 +212,7 @@ /* override with calculated, extended default, or driver values */ - if (host->hostt->bios_param) { + if (!pc98 && host->hostt->bios_param) { host->hostt->bios_param(sdp, bdev, capacity, diskinfo); } else @@ -1322,6 +1323,27 @@ kfree(sdkp); } +struct scsi_device *sd_find_params_by_bdev(struct block_device *bdev, char **disk_name, sector_t *capacity) +{ + struct scsi_disk *sdkp; + int major = major(to_kdev_t(bdev->bd_dev)); + + spin_lock(&sd_devlist_lock); + list_for_each_entry(sdkp, &sd_devlist, list) { + if (sdkp->disk->major == major) { + if (capacity) + *capacity = sdkp->capacity; + if (disk_name) + *disk_name = sdkp->disk->disk_name; + spin_unlock(&sd_devlist_lock); + return sdkp->device; + } + } + + spin_unlock(&sd_devlist_lock); + return NULL; +} + /** * init_sd - entry point for this driver (both when built in or when * a module). diff -urN linux/drivers/scsi/wd33c93.c linux98/drivers/scsi/wd33c93.c --- linux/drivers/scsi/wd33c93.c Sat Oct 19 13:02:24 2002 +++ linux98/drivers/scsi/wd33c93.c Tue Oct 29 15:44:15 2002 @@ -84,6 +84,7 @@ #include <linux/init.h> #include <asm/irq.h> #include <linux/blk.h> +#include <linux/spinlock.h> #include "scsi.h" #include "hosts.h" @@ -173,7 +174,11 @@ MODULE_PARM(setup_strings, "s"); #endif +static spinlock_t wd_lock = SPIN_LOCK_UNLOCKED; +#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE) +#include "pc980155regs.h" +#else /* !CONFIG_SCSI_PC980155 */ static inline uchar read_wd33c93(const wd33c93_regs regs, uchar reg_num) { @@ -203,6 +208,7 @@ *regs.SCMD = cmd; mb(); } +#endif /* CONFIG_SCSI_PC980155 */ static inline uchar read_1_byte(const wd33c93_regs regs) @@ -220,6 +226,7 @@ return x; } +#if !defined(CONFIG_SCSI_PC980155) && !defined(CONFIG_SCSI_PC980155_MODULE) static void write_wd33c93_count(const wd33c93_regs regs, unsigned long value) { @@ -244,6 +251,7 @@ mb(); return value; } +#endif /* !CONFIG_SCSI_PC980155 */ /* The 33c93 needs to be told which direction a command transfers its @@ -385,8 +393,7 @@ * sense data is not lost before REQUEST_SENSE executes. */ - save_flags(flags); - cli(); + spin_lock_irqsave(&wd_lock, flags); if (!(hostdata->input_Q) || (cmd->cmnd[0] == REQUEST_SENSE)) { cmd->host_scribble = (uchar *)hostdata->input_Q; @@ -407,7 +414,7 @@ DB(DB_QUEUE_COMMAND,printk(")Q-%ld ",cmd->pid)) - restore_flags(flags); + spin_unlock_irqrestore(&wd_lock, flags); return 0; } @@ -428,7 +435,6 @@ struct WD33C93_hostdata *hostdata = (struct WD33C93_hostdata *)instance->hostdata; const wd33c93_regs regs = hostdata->regs; Scsi_Cmnd *cmd, *prev; -int i; DB(DB_EXECUTE,printk("EX(")) @@ -591,9 +597,16 @@ * (take advantage of auto-incrementing) */ - *regs.SASR = WD_CDB_1; - for (i=0; i<cmd->cmd_len; i++) - *regs.SCMD = cmd->cmnd[i]; +#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE) + write_wd33c93_cdb(regs, cmd->cmd_len, cmd->cmnd); +#else /* !CONFIG_SCSI_PC980155 */ + { + int i; + *regs.SASR = WD_CDB_1; + for (i = 0; i < cmd->cmd_len; i++) + *regs.SCMD = cmd->cmnd[i]; + } +#endif /* CONFIG_SCSI_PC980155 */ /* The wd33c93 only knows about Group 0, 1, and 5 commands when * it's doing a 'select-and-transfer'. To be safe, we write the @@ -765,7 +778,7 @@ if (!(asr & ASR_INT) || (asr & ASR_BSY)) return; - save_flags(flags); + local_save_flags(flags); #ifdef PROC_STATISTICS hostdata->int_cnt++; @@ -831,7 +844,7 @@ * is here... */ - restore_flags(flags); + local_irq_restore(flags); /* We are not connected to a target - check to see if there * are commands waiting to be executed. @@ -1085,7 +1098,7 @@ write_wd33c93_cmd(regs, WD_CMD_NEGATE_ACK); hostdata->state = S_CONNECTED; } - restore_flags(flags); + local_irq_restore(flags); break; @@ -1117,7 +1130,7 @@ /* We are no longer connected to a target - check to see if * there are commands waiting to be executed. */ - restore_flags(flags); + local_irq_restore(flags); wd33c93_execute(instance); } else { @@ -1200,7 +1213,7 @@ * there are commands waiting to be executed. */ /* look above for comments on scsi_done() */ - restore_flags(flags); + local_irq_restore(flags); wd33c93_execute(instance); break; @@ -1228,7 +1241,7 @@ else cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8); cmd->scsi_done(cmd); - restore_flags(flags); + local_irq_restore(flags); break; case S_PRE_TMP_DISC: case S_RUNNING_LEVEL2: @@ -1693,7 +1706,7 @@ return 1; } -__setup("wd33c93", wd33c93_setup); +__setup("wd33c93=", wd33c93_setup); /* check_setup_args() returns index if key found, 0 if not @@ -1831,10 +1844,9 @@ { unsigned long flags; - save_flags(flags); - cli(); + spin_lock_irqsave(&wd_lock, flags); reset_wd33c93(instance); - restore_flags(flags); + spin_unlock_irqrestore(&wd_lock, flags); } printk("wd33c93-%d: chip=%s/%d no_sync=0x%x no_dma=%d",instance->host_no, @@ -1929,8 +1941,7 @@ return len; } - save_flags(flags); - cli(); + spin_lock_irqsave(&wd_lock, flags); bp = buf; *bp = '\0'; if (hd->proc & PR_VERSION) { @@ -2005,7 +2016,7 @@ } } strcat(bp,"\n"); - restore_flags(flags); + spin_unlock_irqrestore(&wd_lock, flags); *start = buf; if (stop) { stop = 0; @@ -2034,4 +2045,10 @@ MOD_DEC_USE_COUNT; } +EXPORT_SYMBOL(wd33c93_reset); +EXPORT_SYMBOL(wd33c93_init); +EXPORT_SYMBOL(wd33c93_release); +EXPORT_SYMBOL(wd33c93_abort); +EXPORT_SYMBOL(wd33c93_queuecommand); +EXPORT_SYMBOL(wd33c93_intr); MODULE_LICENSE("GPL"); diff -urN linux/drivers/scsi/wd33c93.h linux98/drivers/scsi/wd33c93.h --- linux/drivers/scsi/wd33c93.h Sat Oct 12 13:21:35 2002 +++ linux98/drivers/scsi/wd33c93.h Sat Oct 12 14:18:53 2002 @@ -186,8 +186,13 @@ /* This is what the 3393 chip looks like to us */ typedef struct { +#if defined(CONFIG_SCSI_PC980155) || defined(CONFIG_SCSI_PC980155_MODULE) + volatile unsigned int *SASR; + volatile unsigned int *SCMD; +#else volatile unsigned char *SASR; volatile unsigned char *SCMD; +#endif } wd33c93_regs; diff -urN linux/include/scsi/scsicam.h linux98/include/scsi/scsicam.h --- linux/include/scsi/scsicam.h Thu Oct 31 13:23:43 2002 +++ linux98/include/scsi/scsicam.h Fri Nov 1 14:37:33 2002 @@ -16,4 +16,6 @@ extern int scsi_partsize(unsigned char *buf, unsigned long capacity, unsigned int *cyls, unsigned int *hds, unsigned int *secs); extern unsigned char *scsi_bios_ptable(struct block_device *bdev); +extern int pc9800_scsi_bios_param(struct block_device *bdev, sector_t capacity, + int *ip); #endif /* def SCSICAM_H */

--------------92D974D51036339FF7506161--

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/