timer glitch (solved?)

[Felipe Massia]

My clock, some times, gives wrong results. When I call the folowing
command

  bash$ while : ; do date ; done

the time shown is not correct. When the seconds are changing, for a
small period of time, the time is offset by about 1h12min. E.g. when the
clock is changing from 1h30min30sec to 1h30min31sec, some 2 or 3 lines
shown are 2h42min.

I don't know how to reproduce the problem. It seems the timer enters
this wrong state after using mplayer (maybe because it's
"timer-hungry").

I've read the "timer glitch on 2.4.18: solved" thread in this list and I
think it's the same problem.

Still not clear to me: should I experience this problem w/ 2.4.19? Is there a way so I can have the clock working properly?

BTW, I don't know if it's important to mention: I'm using rtc. But even
when I remove the rtc module, the problem persists.

Some data on my system (maybe useful):

$ uname -a
Linux felipe 2.4.19-k6 #1 Sun Oct 6 19:53:19 EST 2002 i586 AMD-K6(tm) 3D processor AuthenticAMD GNU/Linux

# kernel-image for k6 from Debian unstable

$ dmesg | grep -i via
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:07.1
parport_pc: Via 686A parallel port: io=0x378

# I read something about VIA686 mb in the thread

$ cat /proc/cpuinfo

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 5
model		: 8
model name	: AMD-K6(tm) 3D processor
stepping	: 12
cpu MHz		: 501.157

tia,
Felipe