[BENCHMARK] 2.5.52-mm1 with contest

Con Kolivas (conman@kolivas.net)
Thu, 19 Dec 2002 08:25:49 +1100


Here are contest benchmarks for 2.5.52-mm1 for SMP only:

noload:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 39.3 180 0 0 1.09
2.5.50-mm1 [6] 39.4 181 0 0 1.09
2.5.51 [3] 39.6 180 0 0 1.09
2.5.51-mm1 [3] 39.5 181 0 0 1.09
2.5.51-mm2 [3] 39.1 182 0 0 1.08
2.5.52 [7] 39.3 181 0 0 1.09
2.5.52-mm1 [8] 39.7 180 0 0 1.10

cacherun:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 36.5 194 0 0 1.01
2.5.50-mm1 [6] 36.6 194 0 0 1.01
2.5.51 [3] 36.5 195 0 0 1.01
2.5.51-mm1 [2] 36.8 194 0 0 1.02
2.5.51-mm2 [3] 36.4 195 0 0 1.01
2.5.52 [7] 36.5 194 0 0 1.01
2.5.52-mm1 [7] 36.9 194 0 0 1.02

process_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 47.8 148 10 46 1.32
2.5.50-mm1 [5] 47.6 150 8 43 1.31
2.5.51 [3] 50.5 139 12 54 1.39
2.5.51-mm1 [2] 51.0 138 13 56 1.41
2.5.51-mm2 [3] 48.3 145 11 49 1.33
2.5.52 [7] 48.7 144 10 49 1.34
2.5.52-mm1 [7] 49.0 144 10 50 1.35

ctar_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 54.6 157 1 10 1.51
2.5.50-mm1 [5] 51.3 155 0 4 1.42
2.5.51 [7] 58.2 158 1 10 1.61
2.5.51-mm2 [7] 55.1 158 1 11 1.52
2.5.52 [7] 56.1 161 1 10 1.55
2.5.52-mm1 [7] 55.5 156 1 10 1.53

xtar_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 116.2 103 2 10 3.21
2.5.50-mm1 [5] 83.9 111 1 9 2.32
2.5.51 [7] 104.8 124 2 10 2.89
2.5.51-mm2 [7] 100.2 112 1 10 2.77
2.5.52 [7] 83.1 138 1 9 2.29
2.5.52-mm1 [7] 77.4 122 1 8 2.14

io_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 87.6 102 14 22 2.42
2.5.50-mm1 [5] 99.0 92 14 21 2.73
2.5.51 [7] 84.6 102 13 21 2.34
2.5.51-mm2 [7] 86.4 101 12 21 2.39
2.5.52 [7] 73.1 111 10 19 2.02
2.5.52-mm1 [7] 80.5 108 10 19 2.22

io_other:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 59.3 139 7 18 1.64
2.5.50-mm1 [5] 70.5 125 10 22 1.95
2.5.51 [7] 64.5 134 7 18 1.78
2.5.51-mm2 [7] 64.1 133 7 20 1.77
2.5.52 [7] 75.1 120 10 21 2.07
2.5.52-mm1 [7] 60.1 131 7 18 1.66

read_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 49.3 151 5 7 1.36
2.5.50-mm1 [5] 52.1 142 2 3 1.44
2.5.51 [3] 48.5 154 5 7 1.34
2.5.51-mm2 [2] 49.4 151 6 7 1.36
2.5.52 [7] 49.4 151 5 7 1.36
2.5.52-mm1 [7] 49.9 149 5 6 1.38

list_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 43.4 167 0 8 1.20
2.5.50-mm1 [5] 44.0 167 0 7 1.22
2.5.51 [3] 43.5 167 0 8 1.20
2.5.51-mm2 [2] 43.3 168 0 8 1.20
2.5.52 [7] 43.2 167 0 9 1.19
2.5.52-mm1 [7] 43.8 167 0 9 1.21

mem_load:
Kernel [runs] Time CPU% Loads LCPU% Ratio
2.5.50 [5] 63.3 141 36 3 1.75
2.5.50-mm1 [5] 67.1 126 39 3 1.85
2.5.51 [7] 62.6 148 38 3 1.73
2.5.51-mm2 [7] 63.0 144 38 3 1.74
2.5.52 [7] 63.5 148 38 3 1.75
2.5.52-mm1 [7] 71.1 123 36 2 1.96

Shorter times on the io writing loads (io load, io other, xtar load).
Slightly longer time on mem_load without any increase in the amount of loads
performed.

I can't offer meaningful Uniprocessor results because unfortunately doing a make
clean, mrproper, config, dep in that testbed tree seems to invalidate previous
results even with the same .config. Why the same config can take longer or
shorter to compile after cleaning up the tree makes no sense to me but since
I've observed it I'll mention it and not post the results.

Further details and archived results can be found here:
http://www.osdl.org/projects/ctdevel/results/

Regards,
Con
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/