[PATCH 2.4] : donauboe IrDA driver (resend)

Jean Tourrilhes (jt@bougret.hpl.hp.com)
Wed, 18 Dec 2002 18:46:32 -0800


Hi Marcelo,

I've noticed that the attached patch was also not included in
2.4.21-pre2.
It's a new driver that replaces the old toshoboe by fixing a
mountain of bugs and adding support for newer revisions of the
hardware, and is therefore anticipated by people having this hardware
(and who don't want to upgrade to 2.5.X). I decided to include this
new driver alongside the old driver to be on the safe side.
I checked that it applies properly in 2.4.21-pre2, so would
you mind applying that to your kernel ?

Thanks...

Jean

ir241_donauboe-2.diff :
---------------------
<Following patch from Martin Lucina & Christian Gennerat>
o [FEATURE] Rewrite of the toshoboe driver using documentation
o [FEATURE] Support Donau oboe chipsets.
o [FEATURE] FIR support
o [CORRECT] Probe chip before opening
o [FEATURE] suspend/resume support
o [FEATURE] Numerous other improvements/cleanups
<Currently, we keep the old toshoboe driver around>

diff -u -p linux/Documentation/Configure.d2.help linux/Documentation/Configure.help
--- linux/Documentation/Configure.d2.help Mon Dec 2 15:05:53 2002
+++ linux/Documentation/Configure.help Mon Dec 2 15:05:58 2002
@@ -24413,13 +24413,24 @@ CONFIG_NS83820
say M here and read <file:Documentation/modules.txt>. The module
will be called ns83820.o.

+Toshiba Type-O IR Port device driver (old driver)
+CONFIG_TOSHIBA_OLD
+ Say Y here if you want to build support for the Toshiba Type-O IR
+ chipset. This chipset is used by the Toshiba Libretto 100CT, and
+ many more laptops. This driver is obsolete, will no more be
+ maintained and will be removed in favor of the new driver.
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>.
+ The module will be called toshoboe.o.
+
Toshiba Type-O IR Port device driver
CONFIG_TOSHIBA_FIR
Say Y here if you want to build support for the Toshiba Type-O IR
- chipset. This chipset is used by the Toshiba Libretto 100CT, and
- many more laptops. If you want to compile it as a module, say M
- here and read <file:Documentation/modules.txt>. The module will be
- called toshoboe.o.
+ and Donau oboe chipsets. These chipsets are used by the Toshiba
+ Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>.
+ The module will be called donauboe.o.

SMC IrCC
CONFIG_SMC_IRCC_FIR
diff -u -p -r --new-file linux/drivers/net/irda.d2/Config.in linux/drivers/net/irda/Config.in
--- linux/drivers/net/irda.d2/Config.in Wed Sep 11 15:22:22 2002
+++ linux/drivers/net/irda/Config.in Thu Sep 12 10:33:51 2002
@@ -28,6 +28,7 @@ comment 'FIR device drivers'
dep_tristate 'IrDA USB dongles (Experimental)' CONFIG_USB_IRDA $CONFIG_IRDA $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate 'NSC PC87108/PC87338' CONFIG_NSC_FIR $CONFIG_IRDA
dep_tristate 'Winbond W83977AF (IR)' CONFIG_WINBOND_FIR $CONFIG_IRDA
+dep_tristate 'Toshiba Type-O IR Port (old driver)' CONFIG_TOSHIBA_OLD $CONFIG_IRDA
dep_tristate 'Toshiba Type-O IR Port' CONFIG_TOSHIBA_FIR $CONFIG_IRDA
if [ "$CONFIG_MIPS" = "y" ]; then
dep_tristate 'Alchemy Au1000 SIR/FIR' CONFIG_AU1000_FIR $CONFIG_IRDA
diff -u -p -r --new-file linux/drivers/net/irda.d2/Makefile linux/drivers/net/irda/Makefile
--- linux/drivers/net/irda.d2/Makefile Wed Sep 11 15:22:22 2002
+++ linux/drivers/net/irda/Makefile Thu Sep 12 10:33:51 2002
@@ -17,7 +17,8 @@ obj-$(CONFIG_USB_IRDA) += irda-usb.o
obj-$(CONFIG_NSC_FIR) += nsc-ircc.o
obj-$(CONFIG_WINBOND_FIR) += w83977af_ir.o
obj-$(CONFIG_SA1100_FIR) += sa1100_ir.o
-obj-$(CONFIG_TOSHIBA_FIR) += toshoboe.o
+obj-$(CONFIG_TOSHIBA_OLD) += toshoboe.o
+obj-$(CONFIG_TOSHIBA_FIR) += donauboe.o
obj-$(CONFIG_SMC_IRCC_FIR) += smc-ircc.o irport.o
obj-$(CONFIG_ALI_FIR) += ali-ircc.o
obj-$(CONFIG_VLSI_FIR) += vlsi_ir.o
diff -u -p -r --new-file linux/drivers/net/irda.d2/donauboe.c linux/drivers/net/irda/donauboe.c
--- linux/drivers/net/irda.d2/donauboe.c Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/irda/donauboe.c Thu Sep 12 10:57:57 2002
@@ -0,0 +1,1850 @@
+/*****************************************************************
+ *
+ * Filename: donauboe.c
+ * Version: 2.17
+ * Description: Driver for the Toshiba OBOE (or type-O or 701)
+ * FIR Chipset, also supports the DONAUOBOE (type-DO
+ * or d01) FIR chipset which as far as I know is
+ * register compatible.
+ * Status: Experimental.
+ * Author: James McKenzie <james@fishsoup.dhs.org>
+ * Created at: Sat May 8 12:35:27 1999
+ * Modified: Paul Bristow <paul.bristow@technologist.com>
+ * Modified: Mon Nov 11 19:10:05 1999
+ * Modified: James McKenzie <james@fishsoup.dhs.org>
+ * Modified: Thu Mar 16 12:49:00 2000 (Substantial rewrite)
+ * Modified: Sat Apr 29 00:23:03 2000 (Added DONAUOBOE support)
+ * Modified: Wed May 24 23:45:02 2000 (Fixed chipio_t structure)
+ * Modified: 2.13 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.13 dim jan 07 21:57:39 2001 (tested with kernel 2.4 & irnet/ppp)
+ * Modified: 2.14 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.14 lun fev 05 17:55:59 2001 (adapted to patch-2.4.1-pre8-irda1)
+ * Modified: 2.15 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.15 Fri Jun 21 20:40:59 2002 (sync with 2.4.18, substantial fixes)
+ * Modified: 2.16 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.16 Sat Jun 22 18:54:29 2002 (fix freeregion, default to verbose)
+ * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.17 jeu sep 12 08:50:20 2002 (save_flags();cli(); replaced by spinlocks)
+ *
+ * Copyright (c) 1999 James McKenzie, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither James McKenzie nor Cambridge University admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Applicable Models : Libretto 100/110CT and many more.
+ * Toshiba refers to this chip as the type-O IR port,
+ * or the type-DO IR port.
+ *
+ ********************************************************************/
+
+/* Look at toshoboe.h (currently in include/net/irda) for details of */
+/* Where to get documentation on the chip */
+
+
+static char *rcsid =
+ "$Id: donauboe.c V2.17 jeu sep 12 08:50:20 2002 $";
+
+/* See below for a description of the logic in this driver */
+
+/* Is irda_crc16_table[] exported? not yet */
+/* define this if you get errors about multiple defns of irda_crc16_table */
+#undef CRC_EXPORTED
+
+/* User servicable parts */
+/* Enable the code which probes the chip and does a few tests */
+/* Probe code is very useful for understanding how the hardware works */
+/* Use it with various combinations of TT_LEN, RX_LEN */
+/* Strongly recomended, disable if the probe fails on your machine */
+/* and send me <james@fishsoup.dhs.org> the output of dmesg */
+#define DO_PROBE 1
+
+/* Trace Transmit ring, interrupts, Receive ring or not ? */
+#define PROBE_VERBOSE 1
+
+/* Debug option, examine sent and received raw data */
+/* Irdadump is better, but does not see all packets. enable it if you want. */
+#undef DUMP_PACKETS
+
+/* MIR mode has not been tested. Some behaviour is different */
+/* Seems to work against an Ericsson R520 for me. -Martin */
+#define USE_MIR
+
+/* Schedule back to back hardware transmits wherever possible, otherwise */
+/* we need an interrupt for every frame, unset if oboe works for a bit and */
+/* then hangs */
+#define OPTIMIZE_TX
+
+/* Set the number of slots in the rings */
+/* If you get rx/tx fifo overflows at high bitrates, you can try increasing */
+/* these */
+
+#define RING_SIZE (OBOE_RING_SIZE_RX8 | OBOE_RING_SIZE_TX8)
+#define TX_SLOTS 8
+#define RX_SLOTS 8
+
+
+/* Less user servicable parts below here */
+
+/* Test, Transmit and receive buffer sizes, adjust at your peril */
+/* remarks: nfs usually needs 1k blocks */
+/* remarks: in SIR mode, CRC is received, -> RX_LEN=TX_LEN+2 */
+/* remarks: test accepts large blocks. Standard is 0x80 */
+/* When TT_LEN > RX_LEN (SIR mode) data is stored in successive slots. */
+/* When 3 or more slots are needed for each test packet, */
+/* data received in the first slots is overwritten, even */
+/* if OBOE_CTL_RX_HW_OWNS is not set, without any error! */
+#define TT_LEN 0x80
+#define TX_LEN 0xc00
+#define RX_LEN 0xc04
+/* Real transmitted length (SIR mode) is about 14+(2%*TX_LEN) more */
+/* long than user-defined length (see async_wrap_skb) and is less then 4K */
+/* Real received length is (max RX_LEN) differs from user-defined */
+/* length only b the CRC (2 or 4 bytes) */
+#define BUF_SAFETY 0x7a
+#define RX_BUF_SZ (RX_LEN)
+#define TX_BUF_SZ (TX_LEN+BUF_SAFETY)
+
+
+/* Logic of the netdev part of this driver */
+
+/* The RX ring is filled with buffers, when a packet arrives */
+/* it is DMA'd into the buffer which is marked used and RxDone called */
+/* RxDone forms an skb (and checks the CRC if in SIR mode) and ships */
+/* the packet off upstairs */
+
+/* The transmitter on the oboe chip can work in one of two modes */
+/* for each ring->tx[] the transmitter can either */
+/* a) transmit the packet, leave the trasmitter enabled and proceed to */
+/* the next ring */
+/* OR */
+/* b) transmit the packet, switch off the transmitter and issue TxDone */
+
+/* All packets are entered into the ring in mode b), if the ring was */
+/* empty the transmitter is started. */
+
+/* If OPTIMIZE_TX is defined then in TxDone if the ring contains */
+/* more than one packet, all but the last are set to mode a) [HOWEVER */
+/* the hardware may not notice this, this is why we start in mode b) ] */
+/* then restart the transmitter */
+
+/* If OPTIMIZE_TX is not defined then we just restart the transmitter */
+/* if the ring isn't empty */
+
+/* Speed changes are delayed until the TxRing is empty */
+/* mtt is handled by generating packets with bad CRCs, before the data */
+
+/* TODO: */
+/* check the mtt works ok */
+/* finish the watchdog */
+
+/* No user servicable parts below here */
+
+#define STATIC static
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/rtnetlink.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+//#include <net/irda/irmod.h>
+//#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+#include <net/irda/crc.h>
+
+#include "donauboe.h"
+
+#define INB(port) inb_p(port)
+#define OUTB(val,port) outb_p(val,port)
+#define OUTBP(val,port) outb_p(val,port)
+
+#define PROMPT OUTB(OBOE_PROMPT_BIT,OBOE_PROMPT);
+
+#if PROBE_VERBOSE
+#define PROBE_DEBUG(args...) (printk (args))
+#else
+#define PROBE_DEBUG(args...) ;
+#endif
+
+/* Set the DMA to be byte at a time */
+#define CONFIG0H_DMA_OFF OBOE_CONFIG0H_RCVANY
+#define CONFIG0H_DMA_ON_NORX CONFIG0H_DMA_OFF| OBOE_CONFIG0H_ENDMAC
+#define CONFIG0H_DMA_ON CONFIG0H_DMA_ON_NORX | OBOE_CONFIG0H_ENRX
+
+static struct pci_device_id toshoboe_pci_tbl[] __initdata = {
+ { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIR701, PCI_ANY_ID, PCI_ANY_ID, },
+ { PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_FIRD01, PCI_ANY_ID, PCI_ANY_ID, },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(pci, toshoboe_pci_tbl);
+
+#define DRIVER_NAME "toshoboe"
+static char *driver_name = DRIVER_NAME;
+
+static int max_baud = 4000000;
+static int do_probe = DO_PROBE;
+
+
+/**********************************************************************/
+/* Fcs code */
+
+#ifdef CRC_EXPORTED
+extern __u16 const irda_crc16_table[];
+#else
+static __u16 const irda_crc16_table[256] = {
+ 0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
+ 0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
+ 0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
+ 0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
+ 0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
+ 0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
+ 0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
+ 0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
+ 0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
+ 0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
+ 0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
+ 0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
+ 0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
+ 0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
+ 0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
+ 0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
+ 0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
+ 0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
+ 0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
+ 0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
+ 0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
+ 0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
+ 0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
+ 0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
+ 0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
+ 0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
+ 0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
+ 0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
+ 0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
+ 0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
+ 0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
+ 0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
+};
+#endif
+
+STATIC int
+toshoboe_checkfcs (unsigned char *buf, int len)
+{
+ int i;
+ union
+ {
+ __u16 value;
+ __u8 bytes[2];
+ }
+ fcs;
+
+ fcs.value = INIT_FCS;
+
+ for (i = 0; i < len; ++i)
+ fcs.value = irda_fcs (fcs.value, *(buf++));
+
+ return (fcs.value == GOOD_FCS);
+}
+
+/***********************************************************************/
+/* Generic chip handling code */
+#ifdef DUMP_PACKETS
+static unsigned char dump[50];
+STATIC void
+_dumpbufs (unsigned char *data, int len, char tete)
+{
+int i,j;
+char head=tete;
+for (i=0;i<len;i+=16) {
+ for (j=0;j<16 && i+j<len;j++) { sprintf(&dump[3*j],"%02x.",data[i+j]); }
+ dump [3*j]=0;
+ IRDA_DEBUG (2, "%c%s\n",head , dump);
+ head='+';
+ }
+}
+#endif
+
+/* Dump the registers */
+STATIC void
+toshoboe_dumpregs (struct toshoboe_cb *self)
+{
+ __u32 ringbase;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ ringbase = INB (OBOE_RING_BASE0) << 10;
+ ringbase |= INB (OBOE_RING_BASE1) << 18;
+ ringbase |= INB (OBOE_RING_BASE2) << 26;
+
+ printk (KERN_ERR DRIVER_NAME ": Register dump:\n");
+ printk (KERN_ERR "Interrupts: Tx:%d Rx:%d TxUnder:%d RxOver:%d Sip:%d\n",
+ self->int_tx, self->int_rx, self->int_txunder, self->int_rxover,
+ self->int_sip);
+ printk (KERN_ERR "RX %02x TX %02x RingBase %08x\n",
+ INB (OBOE_RXSLOT), INB (OBOE_TXSLOT), ringbase);
+ printk (KERN_ERR "RING_SIZE %02x IER %02x ISR %02x\n",
+ INB (OBOE_RING_SIZE), INB (OBOE_IER), INB (OBOE_ISR));
+ printk (KERN_ERR "CONFIG1 %02x STATUS %02x\n",
+ INB (OBOE_CONFIG1), INB (OBOE_STATUS));
+ printk (KERN_ERR "CONFIG0 %02x%02x ENABLE %02x%02x\n",
+ INB (OBOE_CONFIG0H), INB (OBOE_CONFIG0L),
+ INB (OBOE_ENABLEH), INB (OBOE_ENABLEL));
+ printk (KERN_ERR "NEW_PCONFIG %02x%02x CURR_PCONFIG %02x%02x\n",
+ INB (OBOE_NEW_PCONFIGH), INB (OBOE_NEW_PCONFIGL),
+ INB (OBOE_CURR_PCONFIGH), INB (OBOE_CURR_PCONFIGL));
+ printk (KERN_ERR "MAXLEN %02x%02x RXCOUNT %02x%02x\n",
+ INB (OBOE_MAXLENH), INB (OBOE_MAXLENL),
+ INB (OBOE_RXCOUNTL), INB (OBOE_RXCOUNTH));
+
+ if (self->ring)
+ {
+ int i;
+ ringbase = virt_to_bus (self->ring);
+ printk (KERN_ERR "Ring at %08x:\n", ringbase);
+ printk (KERN_ERR "RX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ printk (" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
+ printk ("\n");
+ printk (KERN_ERR "TX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ printk (" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
+ printk ("\n");
+ }
+}
+
+/*Don't let the chip look at memory */
+STATIC void
+toshoboe_disablebm (struct toshoboe_cb *self)
+{
+ __u8 command;
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ pci_read_config_byte (self->pdev, PCI_COMMAND, &command);
+ command &= ~PCI_COMMAND_MASTER;
+ pci_write_config_byte (self->pdev, PCI_COMMAND, command);
+
+}
+
+/* Shutdown the chip and point the taskfile reg somewhere else */
+STATIC void
+toshoboe_stopchip (struct toshoboe_cb *self)
+{
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ /*Disable interrupts */
+ OUTB (0x0, OBOE_IER);
+ /*Disable DMA, Disable Rx, Disable Tx */
+ OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+ /*Disable SIR MIR FIR, Tx and Rx */
+ OUTB (0x00, OBOE_ENABLEH);
+ /*Point the ring somewhere safe */
+ OUTB (0x3f, OBOE_RING_BASE2);
+ OUTB (0xff, OBOE_RING_BASE1);
+ OUTB (0xff, OBOE_RING_BASE0);
+
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Why */
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ /*switch it off */
+ OUTB (OBOE_CONFIG1_OFF, OBOE_CONFIG1);
+
+ toshoboe_disablebm (self);
+}
+
+/* Transmitter initialization */
+STATIC void
+toshoboe_start_DMA (struct toshoboe_cb *self, int opts)
+{
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (CONFIG0H_DMA_ON | opts, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+ PROMPT;
+}
+
+/*Set the baud rate */
+STATIC void
+toshoboe_setbaud (struct toshoboe_cb *self)
+{
+ __u16 pconfig = 0;
+ __u8 config0l = 0;
+
+ IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed);
+
+ switch (self->speed)
+ {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+#ifdef USE_MIR
+ case 1152000:
+#endif
+ case 4000000:
+ break;
+ default:
+
+ printk (KERN_ERR DRIVER_NAME ": switch to unsupported baudrate %d\n",
+ self->speed);
+ return;
+ }
+
+ switch (self->speed)
+ {
+ /* For SIR the preamble is done by adding XBOFs */
+ /* to the packet */
+ /* set to filtered SIR mode, filter looks for BOF and EOF */
+ case 2400:
+ pconfig |= 47 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 4800:
+ pconfig |= 23 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 9600:
+ pconfig |= 11 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 19200:
+ pconfig |= 5 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 38400:
+ pconfig |= 2 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 57600:
+ pconfig |= 1 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ case 115200:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 25 << OBOE_PCONFIG_WIDTHSHIFT;
+ break;
+ default:
+ /*Set to packet based reception */
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+ break;
+ }
+
+ switch (self->speed)
+ {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 57600:
+ case 115200:
+ config0l = OBOE_CONFIG0L_ENSIR;
+ if (self->async)
+ {
+ /*Set to character based reception */
+ /*System will lock if MAXLEN=0 */
+ /*so have to be careful */
+ OUTB (0x01, OBOE_MAXLENH);
+ OUTB (0x01, OBOE_MAXLENL);
+ OUTB (0x00, OBOE_MAXLENH);
+ }
+ else
+ {
+ /*Set to packet based reception */
+ config0l |= OBOE_CONFIG0L_ENSIRF;
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+ }
+ break;
+
+#ifdef USE_MIR
+ /* MIR mode */
+ /* Set for 16 bit CRC and enable MIR */
+ /* Preamble now handled by the chip */
+ case 1152000:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ pconfig |= 8 << OBOE_PCONFIG_WIDTHSHIFT;
+ pconfig |= 1 << OBOE_PCONFIG_PREAMBLESHIFT;
+ config0l = OBOE_CONFIG0L_CRC16 | OBOE_CONFIG0L_ENMIR;
+ break;
+#endif
+ /* FIR mode */
+ /* Set for 32 bit CRC and enable FIR */
+ /* Preamble handled by the chip */
+ case 4000000:
+ pconfig |= 0 << OBOE_PCONFIG_BAUDSHIFT;
+ /* Documentation says 14, but toshiba use 15 in their drivers */
+ pconfig |= 15 << OBOE_PCONFIG_PREAMBLESHIFT;
+ config0l = OBOE_CONFIG0L_ENFIR;
+ break;
+ }
+
+ /* Copy into new PHY config buffer */
+ OUTBP (pconfig >> 8, OBOE_NEW_PCONFIGH);
+ OUTB (pconfig & 0xff, OBOE_NEW_PCONFIGL);
+ OUTB (config0l, OBOE_CONFIG0L);
+
+ /* Now make OBOE copy from new PHY to current PHY */
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+ PROMPT;
+
+ /* speed change executed */
+ self->new_speed = 0;
+ self->io.speed = self->speed;
+}
+
+/*Let the chip look at memory */
+STATIC void
+toshoboe_enablebm (struct toshoboe_cb *self)
+{
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+ pci_set_master (self->pdev);
+}
+
+/*setup the ring */
+STATIC void
+toshoboe_initring (struct toshoboe_cb *self)
+{
+ int i;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ self->ring->tx[i].len = 0;
+ self->ring->tx[i].control = 0x00;
+ self->ring->tx[i].address = virt_to_bus (self->tx_bufs[i]);
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ self->ring->rx[i].len = RX_LEN;
+ self->ring->rx[i].len = 0;
+ self->ring->rx[i].address = virt_to_bus (self->rx_bufs[i]);
+ self->ring->rx[i].control = OBOE_CTL_RX_HW_OWNS;
+ }
+}
+
+STATIC void
+toshoboe_resetptrs (struct toshoboe_cb *self)
+{
+ /* Can reset pointers by twidling DMA */
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTBP (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ self->rxs = inb_p (OBOE_RXSLOT) & OBOE_SLOT_MASK;
+ self->txs = inb_p (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+}
+
+/* Called in locked state */
+STATIC void
+toshoboe_initptrs (struct toshoboe_cb *self)
+{
+
+ /* spin_lock_irqsave(self->spinlock, flags); */
+ /* save_flags (flags); */
+
+ /* Can reset pointers by twidling DMA */
+ toshoboe_resetptrs (self);
+
+ OUTB (0x0, OBOE_ENABLEH);
+ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ self->txpending = 0;
+
+ /* spin_unlock_irqrestore(self->spinlock, flags); */
+ /* restore_flags (flags); */
+}
+
+/* Wake the chip up and get it looking at the rings */
+/* Called in locked state */
+STATIC void
+toshoboe_startchip (struct toshoboe_cb *self)
+{
+ __u32 physaddr;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ toshoboe_initring (self);
+ toshoboe_enablebm (self);
+ OUTBP (OBOE_CONFIG1_RESET, OBOE_CONFIG1);
+ OUTBP (OBOE_CONFIG1_ON, OBOE_CONFIG1);
+
+ /* Stop the clocks */
+ OUTB (0, OBOE_ENABLEH);
+
+ /*Set size of rings */
+ OUTB (RING_SIZE, OBOE_RING_SIZE);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Enable ints */
+ OUTB (OBOE_INT_TXDONE | OBOE_INT_RXDONE |
+ OBOE_INT_TXUNDER | OBOE_INT_RXOVER | OBOE_INT_SIP , OBOE_IER);
+
+ /*Acknoledge any pending interrupts */
+ OUTB (0xff, OBOE_ISR);
+
+ /*Set the maximum packet length to 0xfff (4095) */
+ OUTB (RX_LEN >> 8, OBOE_MAXLENH);
+ OUTB (RX_LEN & 0xff, OBOE_MAXLENL);
+
+ /*Shutdown DMA */
+ OUTB (CONFIG0H_DMA_OFF, OBOE_CONFIG0H);
+
+ /*Find out where the rings live */
+ physaddr = virt_to_bus (self->ring);
+
+ ASSERT ((physaddr & 0x3ff) == 0,
+ printk (KERN_ERR DRIVER_NAME "ring not correctly aligned\n");
+ return;);
+
+ OUTB ((physaddr >> 10) & 0xff, OBOE_RING_BASE0);
+ OUTB ((physaddr >> 18) & 0xff, OBOE_RING_BASE1);
+ OUTB ((physaddr >> 26) & 0x3f, OBOE_RING_BASE2);
+
+ /*Enable DMA controler in byte mode and RX */
+ OUTB (CONFIG0H_DMA_ON, OBOE_CONFIG0H);
+
+ /* Start up the clocks */
+ OUTB (OBOE_ENABLEH_PHYANDCLOCK, OBOE_ENABLEH);
+
+ /*set to sensible speed */
+ self->speed = 9600;
+ toshoboe_setbaud (self);
+ toshoboe_initptrs (self);
+}
+
+STATIC void
+toshoboe_isntstuck (struct toshoboe_cb *self)
+{
+}
+
+STATIC void
+toshoboe_checkstuck (struct toshoboe_cb *self)
+{
+ unsigned long flags;
+
+ if (0)
+ {
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ /* This will reset the chip completely */
+ printk (KERN_ERR DRIVER_NAME ": Resetting chip\n");
+
+ toshoboe_stopchip (self);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+}
+
+/*Generate packet of about mtt us long */
+STATIC int
+toshoboe_makemttpacket (struct toshoboe_cb *self, void *buf, int mtt)
+{
+ int xbofs;
+
+ xbofs = ((int) (mtt/100)) * (int) (self->speed);
+ xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/
+ xbofs++;
+
+ IRDA_DEBUG (2, DRIVER_NAME
+ ": generated mtt of %d bytes for %d us at %d baud\n"
+ , xbofs,mtt,self->speed);
+
+ if (xbofs > TX_LEN)
+ {
+ printk (KERN_ERR DRIVER_NAME ": wanted %d bytes MTT but TX_LEN is %d\n",
+ xbofs, TX_LEN);
+ xbofs = TX_LEN;
+ }
+
+ /*xbofs will do for SIR, MIR and FIR,SIR mode doesn't generate a checksum anyway */
+ memset (buf, XBOF, xbofs);
+
+ return xbofs;
+}
+
+/***********************************************************************/
+/* Probe code */
+
+STATIC void
+toshoboe_dumptx (struct toshoboe_cb *self)
+{
+ int i;
+ PROBE_DEBUG(KERN_WARNING "TX:");
+ for (i = 0; i < RX_SLOTS; ++i)
+ PROBE_DEBUG(" (%d,%02x)",self->ring->tx[i].len,self->ring->tx[i].control);
+ PROBE_DEBUG(" [%d]\n",self->speed);
+}
+
+STATIC void
+toshoboe_dumprx (struct toshoboe_cb *self, int score)
+{
+ int i;
+ PROBE_DEBUG(" %d\nRX:",score);
+ for (i = 0; i < RX_SLOTS; ++i)
+ PROBE_DEBUG(" (%d,%02x)",self->ring->rx[i].len,self->ring->rx[i].control);
+ PROBE_DEBUG("\n");
+}
+
+static inline int
+stuff_byte (__u8 byte, __u8 * buf)
+{
+ switch (byte)
+ {
+ case BOF: /* FALLTHROUGH */
+ case EOF: /* FALLTHROUGH */
+ case CE:
+ /* Insert transparently coded */
+ buf[0] = CE; /* Send link escape */
+ buf[1] = byte ^ IRDA_TRANS; /* Complement bit 5 */
+ return 2;
+ /* break; */
+ default:
+ /* Non-special value, no transparency required */
+ buf[0] = byte;
+ return 1;
+ /* break; */
+ }
+}
+
+STATIC int toshoboe_invalid_dev(int irq)
+{
+ printk (KERN_WARNING DRIVER_NAME ": irq %d for unknown device.\n", irq);
+ return 1;
+}
+
+STATIC void
+toshoboe_probeinterrupt (int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
+ __u8 irqstat;
+
+ if (self == NULL && toshoboe_invalid_dev(irq))
+ return;
+
+ irqstat = INB (OBOE_ISR);
+
+/* was it us */
+ if (!(irqstat & OBOE_INT_MASK))
+ return;
+
+/* Ack all the interrupts */
+ OUTB (irqstat, OBOE_ISR);
+
+ if (irqstat & OBOE_INT_TXDONE)
+ {
+ int txp;
+
+ self->int_tx++;
+ PROBE_DEBUG("T");
+
+ txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+ if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ self->int_tx+=100;
+ PROBE_DEBUG("S");
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+ }
+ }
+
+ if (irqstat & OBOE_INT_RXDONE) {
+ self->int_rx++;
+ PROBE_DEBUG("R"); }
+ if (irqstat & OBOE_INT_TXUNDER) {
+ self->int_txunder++;
+ PROBE_DEBUG("U"); }
+ if (irqstat & OBOE_INT_RXOVER) {
+ self->int_rxover++;
+ PROBE_DEBUG("O"); }
+ if (irqstat & OBOE_INT_SIP) {
+ self->int_sip++;
+ PROBE_DEBUG("I"); }
+}
+
+STATIC int
+toshoboe_maketestpacket (unsigned char *buf, int badcrc, int fir)
+{
+ int i;
+ int len = 0;
+ union
+ {
+ __u16 value;
+ __u8 bytes[2];
+ }
+ fcs;
+
+ if (fir)
+ {
+ memset (buf, 0, TT_LEN);
+ return (TT_LEN);
+ }
+
+ fcs.value = INIT_FCS;
+
+ memset (buf, XBOF, 10);
+ len += 10;
+ buf[len++] = BOF;
+
+ for (i = 0; i < TT_LEN; ++i)
+ {
+ len += stuff_byte (i, buf + len);
+ fcs.value = irda_fcs (fcs.value, i);
+ }
+
+ len += stuff_byte (fcs.bytes[0] ^ badcrc, buf + len);
+ len += stuff_byte (fcs.bytes[1] ^ badcrc, buf + len);
+ buf[len++] = EOF;
+ len++;
+ return len;
+}
+
+STATIC int
+toshoboe_probefail (struct toshoboe_cb *self, char *msg)
+{
+ printk (KERN_ERR DRIVER_NAME "probe(%d) failed %s\n",self-> speed, msg);
+ toshoboe_dumpregs (self);
+ toshoboe_stopchip (self);
+ free_irq (self->io.irq, (void *) self);
+ return 0;
+}
+
+STATIC int
+toshoboe_numvalidrcvs (struct toshoboe_cb *self)
+{
+ int i, ret = 0;
+ for (i = 0; i < RX_SLOTS; ++i)
+ if ((self->ring->rx[i].control & 0xe0) == 0)
+ ret++;
+
+ return ret;
+}
+
+STATIC int
+toshoboe_numrcvs (struct toshoboe_cb *self)
+{
+ int i, ret = 0;
+ for (i = 0; i < RX_SLOTS; ++i)
+ if (!(self->ring->rx[i].control & OBOE_CTL_RX_HW_OWNS))
+ ret++;
+
+ return ret;
+}
+
+STATIC int
+toshoboe_probe (struct toshoboe_cb *self)
+{
+ int i, j, n;
+#ifdef USE_MIR
+ int bauds[] = { 9600, 115200, 4000000, 1152000 };
+#else
+ int bauds[] = { 9600, 115200, 4000000 };
+#endif
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (request_irq (self->io.irq, toshoboe_probeinterrupt,
+ self->io.irqflags, "toshoboe", (void *) self))
+ {
+ printk (KERN_ERR DRIVER_NAME ": probe failed to allocate irq %d\n",
+ self->io.irq);
+ return 0;
+ }
+
+ /* test 1: SIR filter and back to back */
+
+ for (j = 0; j < (sizeof (bauds) / sizeof (int)); ++j)
+ {
+ int fir = (j > 1);
+ toshoboe_stopchip (self);
+
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ /*Address is already setup */
+ toshoboe_startchip (self);
+ self->int_rx = self->int_tx = 0;
+ self->speed = bauds[j];
+ toshoboe_setbaud (self);
+ toshoboe_initptrs (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ self->ring->tx[self->txs].control =
+/* (FIR only) OBOE_CTL_TX_SIP needed for switching to next slot */
+/* MIR: all received data is stored in one slot */
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ : OBOE_CTL_TX_HW_OWNS ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_SIP
+ : OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ : OBOE_CTL_TX_HW_OWNS ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ self->ring->tx[self->txs].control =
+ (fir) ? OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX
+ | OBOE_CTL_TX_SIP | OBOE_CTL_TX_BAD_CRC
+ : OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX ;
+ self->ring->tx[self->txs].len =
+ toshoboe_maketestpacket (self->tx_bufs[self->txs], 0, fir);
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ toshoboe_dumptx (self);
+ /* Turn on TX and RX and loopback */
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ i = 0;
+ n = fir ? 1 : 4;
+ while (toshoboe_numvalidrcvs (self) != n)
+ {
+ if (i > 4800)
+ return toshoboe_probefail (self, "filter test");
+ udelay ((9600*(TT_LEN+16))/self->speed);
+ i++;
+ }
+
+ n = fir ? 203 : 102;
+ while ((toshoboe_numrcvs(self) != self->int_rx) || (self->int_tx != n))
+ {
+ if (i > 4800)
+ return toshoboe_probefail (self, "interrupt test");
+ udelay ((9600*(TT_LEN+16))/self->speed);
+ i++;
+ }
+ toshoboe_dumprx (self,i);
+
+ }
+
+ /* test 2: SIR in char at a time */
+
+ toshoboe_stopchip (self);
+ self->int_rx = self->int_tx = 0;
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ self->async = 1;
+ self->speed = 115200;
+ toshoboe_setbaud (self);
+ self->ring->tx[self->txs].control =
+ OBOE_CTL_TX_RTCENTX | OBOE_CTL_TX_HW_OWNS;
+ self->ring->tx[self->txs].len = 4;
+
+ ((unsigned char *) self->tx_bufs[self->txs])[0] = 'f';
+ ((unsigned char *) self->tx_bufs[self->txs])[1] = 'i';
+ ((unsigned char *) self->tx_bufs[self->txs])[2] = 's';
+ ((unsigned char *) self->tx_bufs[self->txs])[3] = 'h';
+ toshoboe_dumptx (self);
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ i = 0;
+ while (toshoboe_numvalidrcvs (self) != 4)
+ {
+ if (i > 100)
+ return toshoboe_probefail (self, "Async test");
+ udelay (100);
+ i++;
+ }
+
+ while ((toshoboe_numrcvs (self) != self->int_rx) || (self->int_tx != 1))
+ {
+ if (i > 100)
+ return toshoboe_probefail (self, "Async interrupt test");
+ udelay (100);
+ i++;
+ }
+ toshoboe_dumprx (self,i);
+
+ self->async = 0;
+ self->speed = 9600;
+ toshoboe_setbaud (self);
+ toshoboe_stopchip (self);
+
+ free_irq (self->io.irq, (void *) self);
+
+ printk (KERN_WARNING DRIVER_NAME ": Self test passed ok\n");
+
+ return 1;
+}
+
+/******************************************************************/
+/* Netdev style code */
+
+/* Transmit something */
+STATIC int
+toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+ __s32 speed;
+ int mtt, len, ctl;
+ unsigned long flags;
+ struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb;
+
+ self = (struct toshoboe_cb *) dev->priv;
+
+ ASSERT (self != NULL, return 0; );
+
+ IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__
+ ,skb->len,self->txpending,INB (OBOE_ENABLEH));
+ if (!cb->magic) {
+ IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic);
+#ifdef DUMP_PACKETS
+ _dumpbufs(skb->data,skb->len,'>');
+#endif
+ }
+
+ /* change speed pending, wait for its execution */
+ if (self->new_speed)
+ return -EBUSY;
+
+ /* device stopped (apm) wait for restart */
+ if (self->stopped)
+ return -EBUSY;
+
+ toshoboe_checkstuck (self);
+
+ /* Check if we need to change the speed */
+ /* But not now. Wait after transmission if mtt not required */
+ speed=irda_get_next_speed(skb);
+ if ((speed != self->io.speed) && (speed != -1))
+ {
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->txpending || skb->len)
+ {
+ self->new_speed = speed;
+ IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" ,
+ __FUNCTION__, speed);
+ /* if no data, that's all! */
+ if (!skb->len)
+ {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+ return 0;
+ }
+ /* True packet, go on, but */
+ /* do not accept anything before change speed execution */
+ netif_stop_queue(dev);
+ /* ready to process TxDone interrupt */
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+ else
+ {
+ /* idle and no data, change speed now */
+ self->speed = speed;
+ toshoboe_setbaud (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+ return 0;
+ }
+
+ }
+
+ if ((mtt = irda_get_mtt(skb)))
+ {
+ /* This is fair since the queue should be empty anyway */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->txpending)
+ {
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -EBUSY;
+ }
+
+ /* If in SIR mode we need to generate a string of XBOFs */
+ /* In MIR and FIR we need to generate a string of data */
+ /* which we will add a wrong checksum to */
+
+ mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt);
+ IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__
+ ,skb->len,mtt,self->txpending);
+ if (mtt)
+ {
+ self->ring->tx[self->txs].len = mtt & 0xfff;
+
+ ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
+ {
+ ctl |= OBOE_CTL_TX_BAD_CRC | OBOE_CTL_TX_SIP ;
+ }
+#ifdef USE_MIR
+ else if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_MIRON)
+ {
+ ctl |= OBOE_CTL_TX_BAD_CRC;
+ }
+#endif
+ self->ring->tx[self->txs].control = ctl;
+
+ OUTB (0x0, OBOE_ENABLEH);
+ /* It is only a timer. Do not send mtt packet outside! */
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX | OBOE_CONFIG0H_LOOP);
+
+ self->txpending++;
+
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ }
+ else
+ {
+ printk(KERN_ERR DRIVER_NAME ": problem with mtt packet - ignored\n");
+ }
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ }
+
+#ifdef DUMP_PACKETS
+dumpbufs(skb->data,skb->len,'>');
+#endif
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__
+ ,skb->len, self->ring->tx[self->txs].control, self->txpending);
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return -EBUSY;
+ }
+
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_SIRON)
+ {
+ len = async_wrap_skb (skb, self->tx_bufs[self->txs], TX_BUF_SZ);
+ }
+ else
+ {
+ len = skb->len;
+ memcpy (self->tx_bufs[self->txs], skb->data, len);
+ }
+ self->ring->tx[self->txs].len = len & 0x0fff;
+
+ /*Sometimes the HW doesn't see us assert RTCENTX in the interrupt code */
+ /*later this plays safe, we garuntee the last packet to be transmitted */
+ /*has RTCENTX set */
+
+ ctl = OBOE_CTL_TX_HW_OWNS | OBOE_CTL_TX_RTCENTX;
+ if (INB (OBOE_ENABLEH) & OBOE_ENABLEH_FIRON)
+ {
+ ctl |= OBOE_CTL_TX_SIP ;
+ }
+ self->ring->tx[self->txs].control = ctl;
+
+ /* If transmitter is idle start in one-shot mode */
+
+ if (!self->txpending)
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+
+ self->txpending++;
+
+ self->txs++;
+ self->txs %= TX_SLOTS;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ dev_kfree_skb (skb);
+
+ return 0;
+}
+
+/*interrupt handler */
+STATIC void
+toshoboe_interrupt (int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb *) dev_id;
+ __u8 irqstat;
+ struct sk_buff *skb = NULL;
+
+ if (self == NULL && toshoboe_invalid_dev(irq))
+ return;
+
+ irqstat = INB (OBOE_ISR);
+
+/* was it us */
+ if (!(irqstat & OBOE_INT_MASK))
+ return;
+
+/* Ack all the interrupts */
+ OUTB (irqstat, OBOE_ISR);
+
+ toshoboe_isntstuck (self);
+
+/* Txdone */
+ if (irqstat & OBOE_INT_TXDONE)
+ {
+ int txp, txpc;
+ int i;
+
+ txp = self->txpending;
+ self->txpending = 0;
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS)
+ self->txpending++;
+ }
+ IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__
+ ,irqstat,txp,self->txpending);
+
+ txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK;
+
+ /* Got anything queued ? start it together */
+ if (self->ring->tx[txp].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ txpc = txp;
+#ifdef OPTIMIZE_TX
+ while (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
+ {
+ txp = txpc;
+ txpc++;
+ txpc %= TX_SLOTS;
+ self->stats.tx_packets++;
+ if (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
+ self->ring->tx[txp].control &= ~OBOE_CTL_TX_RTCENTX;
+ }
+ self->stats.tx_packets--;
+#else
+ self->stats.tx_packets++;
+#endif
+ toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
+ }
+
+ if ((!self->txpending) && (self->new_speed))
+ {
+ self->speed = self->new_speed;
+ IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n",
+ __FUNCTION__, self->speed);
+ toshoboe_setbaud (self);
+ }
+
+ /* Tell network layer that we want more frames */
+ if (!self->new_speed)
+ netif_wake_queue(self->netdev);
+ }
+
+ if (irqstat & OBOE_INT_RXDONE)
+ {
+ while (!(self->ring->rx[self->rxs].control & OBOE_CTL_RX_HW_OWNS))
+ {
+ int len = self->ring->rx[self->rxs].len;
+ skb = NULL;
+ IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__
+ ,len,self->ring->rx[self->rxs].control);
+
+#ifdef DUMP_PACKETS
+dumpbufs(self->rx_bufs[self->rxs],len,'<');
+#endif
+
+ if (self->ring->rx[self->rxs].control == 0)
+ {
+ __u8 enable = INB (OBOE_ENABLEH);
+
+ /* In SIR mode we need to check the CRC as this */
+ /* hasn't been done by the hardware */
+ if (enable & OBOE_ENABLEH_SIRON)
+ {
+ if (!toshoboe_checkfcs (self->rx_bufs[self->rxs], len))
+ len = 0;
+ /*Trim off the CRC */
+ if (len > 1)
+ len -= 2;
+ else
+ len = 0;
+ IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+
+#ifdef USE_MIR
+ else if (enable & OBOE_ENABLEH_MIRON)
+ {
+ if (len > 1)
+ len -= 2;
+ else
+ len = 0;
+ IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+#endif
+ else if (enable & OBOE_ENABLEH_FIRON)
+ {
+ if (len > 3)
+ len -= 4; /*FIXME: check this */
+ else
+ len = 0;
+ IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable);
+ }
+ else
+ IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable);
+
+ if (len)
+ {
+ skb = dev_alloc_skb (len + 1);
+ if (skb)
+ {
+ skb_reserve (skb, 1);
+
+ skb_put (skb, len);
+ memcpy (skb->data, self->rx_bufs[self->rxs], len);
+
+ self->stats.rx_packets++;
+ skb->dev = self->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons (ETH_P_IRDA);
+ }
+ else
+ {
+ printk (KERN_INFO
+ "%s(), memory squeeze, dropping frame.\n",
+ __FUNCTION__);
+ }
+ }
+ }
+ else
+ {
+ /* TODO: =========================================== */
+ /* if OBOE_CTL_RX_LENGTH, our buffers are too small */
+ /* (MIR or FIR) data is lost. */
+ /* (SIR) data is splitted in several slots. */
+ /* we have to join all the received buffers received */
+ /*in a large buffer before checking CRC. */
+ IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__
+ ,len,self->ring->rx[self->rxs].control);
+ }
+
+ self->ring->rx[self->rxs].len = 0x0;
+ self->ring->rx[self->rxs].control = OBOE_CTL_RX_HW_OWNS;
+
+ self->rxs++;
+ self->rxs %= RX_SLOTS;
+
+ if (skb)
+ netif_rx (skb);
+
+ }
+ }
+
+ if (irqstat & OBOE_INT_TXUNDER)
+ {
+ printk (KERN_WARNING DRIVER_NAME ": tx fifo underflow\n");
+ }
+ if (irqstat & OBOE_INT_RXOVER)
+ {
+ printk (KERN_WARNING DRIVER_NAME ": rx fifo overflow\n");
+ }
+/* This must be useful for something... */
+ if (irqstat & OBOE_INT_SIP)
+ {
+ self->int_sip++;
+ IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__
+ ,self->int_sip,irqstat,self->txpending);
+ }
+}
+
+STATIC int
+toshoboe_net_init (struct net_device *dev)
+{
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ /* Setup to be a normal IrDA network device driver */
+ irda_device_setup (dev);
+
+ /* Insert overrides below this line! */
+ return 0;
+}
+
+STATIC int
+toshoboe_net_open (struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ ASSERT (dev != NULL, return -1; );
+ self = (struct toshoboe_cb *) dev->priv;
+
+ ASSERT (self != NULL, return 0; );
+
+ if (self->async)
+ return -EBUSY;
+
+ if (self->stopped)
+ return 0;
+
+ if (request_irq (self->io.irq, toshoboe_interrupt,
+ SA_SHIRQ | SA_INTERRUPT, dev->name, (void *) self))
+ {
+ return -EAGAIN;
+ }
+
+ spin_lock_irqsave(&self->spinlock, flags);
+ toshoboe_startchip (self);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+
+ /* Ready to play! */
+ netif_start_queue(dev);
+
+ /*
+ * Open new IrLAP layer instance, now that everything should be
+ * initialized properly
+ */
+ self->irlap = irlap_open (dev, &self->qos, driver_name);
+
+ self->irdad = 1;
+
+ MOD_INC_USE_COUNT;
+
+ return 0;
+}
+
+STATIC int
+toshoboe_net_close (struct net_device *dev)
+{
+ struct toshoboe_cb *self;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ ASSERT (dev != NULL, return -1; );
+ self = (struct toshoboe_cb *) dev->priv;
+
+ /* Stop device */
+ netif_stop_queue(dev);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close (self->irlap);
+ self->irlap = NULL;
+
+ self->irdad = 0;
+
+ free_irq (self->io.irq, (void *) self);
+
+ if (!self->stopped)
+ {
+ toshoboe_stopchip (self);
+ }
+
+ MOD_DEC_USE_COUNT;
+
+ return 0;
+}
+
+/*
+ * Function toshoboe_net_ioctl (dev, rq, cmd)
+ *
+ * Process IOCTL commands for this device
+ *
+ */
+STATIC int
+toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct toshoboe_cb *self;
+ unsigned long flags;
+ int ret = 0;
+
+ ASSERT (dev != NULL, return -1; );
+
+ self = dev->priv;
+
+ ASSERT (self != NULL, return -1; );
+
+ IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ switch (cmd)
+ {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ /* This function will also be used by IrLAP to change the
+ * speed, so we still must allow for speed change within
+ * interrupt context.
+ */
+ IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate );
+ if (!in_interrupt () && !capable (CAP_NET_ADMIN))
+ return -EPERM;
+
+ /* self->speed=irq->ifr_baudrate; */
+ /* toshoboe_setbaud(self); */
+ /* Just change speed once - inserted by Paul Bristow */
+ self->new_speed = irq->ifr_baudrate;
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) );
+ if (!capable (CAP_NET_ADMIN))
+ return -EPERM;
+ irda_device_set_media_busy (self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0;
+ IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__
+ ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving );
+ break;
+ default:
+ IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+ ret = -EOPNOTSUPP;
+ }
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return ret;
+
+}
+
+MODULE_DESCRIPTION("Toshiba OBOE IrDA Device Driver");
+MODULE_AUTHOR("James McKenzie <james@fishsoup.dhs.org>");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM (max_baud, "i");
+MODULE_PARM_DESC(max_baud, "Maximum baud rate");
+
+MODULE_PARM (do_probe, "i");
+MODULE_PARM_DESC(do_probe, "Enable/disable chip probing and self-test");
+
+STATIC void
+toshoboe_close (struct pci_dev *pci_dev)
+{
+ int i;
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ ASSERT (self != NULL, return; );
+
+ if (!self->stopped)
+ {
+ toshoboe_stopchip (self);
+ }
+
+ release_region (self->io.fir_base, self->io.fir_ext);
+
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ kfree (self->tx_bufs[i]);
+ self->tx_bufs[i] = NULL;
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ kfree (self->rx_bufs[i]);
+ self->rx_bufs[i] = NULL;
+ }
+
+ if (self->netdev)
+ {
+ /* Remove netdevice */
+ rtnl_lock ();
+ unregister_netdevice (self->netdev);
+ rtnl_unlock ();
+ }
+
+ kfree (self->ringbuf);
+ self->ringbuf = NULL;
+ self->ring = NULL;
+
+ return;
+}
+
+STATIC int
+toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid)
+{
+ struct toshoboe_cb *self;
+ struct net_device *dev;
+ int i = 0;
+ int ok = 0;
+ int err;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if ((err=pci_enable_device(pci_dev)))
+ return err;
+
+ self = kmalloc (sizeof (struct toshoboe_cb), GFP_KERNEL);
+
+ if (self == NULL)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate memory for "
+ "IrDA control block\n");
+ return -ENOMEM;
+ }
+
+ memset (self, 0, sizeof (struct toshoboe_cb));
+
+ self->pdev = pci_dev;
+ self->base = pci_resource_start(pci_dev,0);
+
+ self->io.fir_base = self->base;
+ self->io.fir_ext = OBOE_IO_EXTENT;
+ self->io.irq = pci_dev->irq;
+ self->io.irqflags = SA_SHIRQ | SA_INTERRUPT;
+
+ self->speed = self->io.speed = 9600;
+ self->async = 0;
+
+ /* Lock the port that we need */
+ if (NULL==request_region (self->io.fir_base, self->io.fir_ext, driver_name))
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't get iobase of 0x%03x\n"
+ ,self->io.fir_base);
+ err = -EBUSY;
+ goto freeself;
+ }
+
+ spin_lock_init(&self->spinlock);
+
+ irda_init_max_qos_capabilies (&self->qos);
+ self->qos.baud_rate.bits = 0;
+
+ if (max_baud >= 2400)
+ self->qos.baud_rate.bits |= IR_2400;
+ /*if (max_baud>=4800) idev->qos.baud_rate.bits|=IR_4800; */
+ if (max_baud >= 9600)
+ self->qos.baud_rate.bits |= IR_9600;
+ if (max_baud >= 19200)
+ self->qos.baud_rate.bits |= IR_19200;
+ if (max_baud >= 115200)
+ self->qos.baud_rate.bits |= IR_115200;
+#ifdef USE_MIR
+ if (max_baud >= 1152000)
+ {
+ self->qos.baud_rate.bits |= IR_1152000;
+ self->flags |= IFF_MIR;
+ }
+#endif
+ if (max_baud >= 4000000)
+ {
+ self->qos.baud_rate.bits |= (IR_4000000 << 8);
+ self->flags |= IFF_FIR;
+ }
+
+ /*FIXME: work this out... */
+ self->qos.min_turn_time.bits = 0xff;
+
+ irda_qos_bits_to_value (&self->qos);
+
+ self->flags = IFF_SIR | IFF_DMA | IFF_PIO;
+
+ /* Allocate twice the size to guarantee alignment */
+ self->ringbuf = (void *) kmalloc (OBOE_RING_LEN << 1, GFP_KERNEL);
+ if (!self->ringbuf)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate DMA buffers\n");
+ err = -ENOMEM;
+ goto freeregion;
+ }
+
+ /*We need to align the taskfile on a taskfile size boundary */
+ {
+ __u32 addr;
+
+ addr = (__u32) self->ringbuf;
+ addr &= ~(OBOE_RING_LEN - 1);
+ addr += OBOE_RING_LEN;
+ self->ring = (struct OboeRing *) addr;
+ }
+
+ memset (self->ring, 0, OBOE_RING_LEN);
+ self->io.mem_base = (__u32) self->ring;
+
+ ok = 1;
+ for (i = 0; i < TX_SLOTS; ++i)
+ {
+ self->tx_bufs[i] = kmalloc (TX_BUF_SZ, GFP_KERNEL);
+ if (!self->tx_bufs[i])
+ ok = 0;
+ }
+
+ for (i = 0; i < RX_SLOTS; ++i)
+ {
+ self->rx_bufs[i] = kmalloc (RX_BUF_SZ, GFP_KERNEL);
+ if (!self->rx_bufs[i])
+ ok = 0;
+ }
+
+ if (!ok)
+ {
+ printk (KERN_ERR DRIVER_NAME ": can't allocate rx/tx buffers\n");
+ err = -ENOMEM;
+ goto freebufs;
+ }
+
+ if (do_probe)
+ if (!toshoboe_probe (self))
+ {
+ err = -ENODEV;
+ goto freebufs;
+ }
+
+ if (!(dev = dev_alloc ("irda%d", &err)))
+ {
+ printk (KERN_ERR DRIVER_NAME ": dev_alloc() failed\n");
+ err = -ENOMEM;
+ goto freebufs;
+ }
+
+ dev->priv = (void *) self;
+ self->netdev = dev;
+
+ printk (KERN_INFO "IrDA: Registered device %s\n", dev->name);
+
+ dev->init = toshoboe_net_init;
+ dev->hard_start_xmit = toshoboe_hard_xmit;
+ dev->open = toshoboe_net_open;
+ dev->stop = toshoboe_net_close;
+ dev->do_ioctl = toshoboe_net_ioctl;
+
+ rtnl_lock ();
+ err = register_netdevice (dev);
+ rtnl_unlock ();
+ if (err)
+ {
+ printk (KERN_ERR DRIVER_NAME ": register_netdev() failed\n");
+ err = -ENOMEM;
+ goto freebufs;
+ }
+
+ pci_set_drvdata(pci_dev,self);
+
+ printk (KERN_INFO DRIVER_NAME ": Using multiple tasks, version %s\n", rcsid);
+
+ return 0;
+
+freebufs:
+ for (i = 0; i < TX_SLOTS; ++i)
+ if (self->tx_bufs[i])
+ kfree (self->tx_bufs[i]);
+ for (i = 0; i < RX_SLOTS; ++i)
+ if (self->rx_bufs[i])
+ kfree (self->rx_bufs[i]);
+ kfree(self->ringbuf);
+
+freeregion:
+ release_region (self->io.fir_base, self->io.fir_ext);
+
+freeself:
+ kfree (self);
+
+ return err;
+}
+
+STATIC int
+toshoboe_gotosleep (struct pci_dev *pci_dev, u32 crap)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+ unsigned long flags;
+ int i = 10;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (!self || self->stopped)
+ return 0;
+
+ if ((!self->irdad) && (!self->async))
+ return 0;
+
+/* Flush all packets */
+ while ((i--) && (self->txpending))
+ udelay (10000);
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ toshoboe_stopchip (self);
+ self->stopped = 1;
+ self->txpending = 0;
+
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return 0;
+}
+
+STATIC int
+toshoboe_wakeup (struct pci_dev *pci_dev)
+{
+ struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev);
+ unsigned long flags;
+
+ IRDA_DEBUG (4, "%s()\n", __FUNCTION__);
+
+ if (!self || !self->stopped)
+ return 0;
+
+ if ((!self->irdad) && (!self->async))
+ return 0;
+
+ spin_lock_irqsave(&self->spinlock, flags);
+
+ toshoboe_startchip (self);
+ self->stopped = 0;
+
+ netif_wake_queue(self->netdev);
+ spin_unlock_irqrestore(&self->spinlock, flags);
+ return 0;
+}
+
+static struct pci_driver toshoboe_pci_driver = {
+ name : "toshoboe",
+ id_table : toshoboe_pci_tbl,
+ probe : toshoboe_open,
+ remove : toshoboe_close,
+ suspend : toshoboe_gotosleep,
+ resume : toshoboe_wakeup
+};
+
+int __init
+toshoboe_init (void)
+{
+ return pci_module_init(&toshoboe_pci_driver);
+}
+
+STATIC void __exit
+toshoboe_cleanup (void)
+{
+ pci_unregister_driver(&toshoboe_pci_driver);
+}
+
+module_init(toshoboe_init);
+module_exit(toshoboe_cleanup);
diff -u -p -r --new-file linux/drivers/net/irda.d2/donauboe.h linux/drivers/net/irda/donauboe.h
--- linux/drivers/net/irda.d2/donauboe.h Wed Dec 31 16:00:00 1969
+++ linux/drivers/net/irda/donauboe.h Thu Sep 12 10:44:56 2002
@@ -0,0 +1,363 @@
+/*********************************************************************
+ *
+ * Filename: toshoboe.h
+ * Version: 2.16
+ * Description: Driver for the Toshiba OBOE (or type-O or 701)
+ * FIR Chipset, also supports the DONAUOBOE (type-DO
+ * or d01) FIR chipset which as far as I know is
+ * register compatible.
+ * Status: Experimental.
+ * Author: James McKenzie <james@fishsoup.dhs.org>
+ * Created at: Sat May 8 12:35:27 1999
+ * Modified: 2.16 Martin Lucina <mato@kotelna.sk>
+ * Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers)
+ * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org>
+ * Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks)
+ *
+ * Copyright (c) 1999 James McKenzie, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither James McKenzie nor Cambridge University admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * Applicable Models : Libretto 100/110CT and many more.
+ * Toshiba refers to this chip as the type-O IR port,
+ * or the type-DO IR port.
+ *
+ * IrDA chip set list from Toshiba Computer Engineering Corp.
+ * model method maker controler Version
+ * Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
+ * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 3020CT FIR,SIR Toshiba Oboe(Sydney)
+ * Portege 7020CT FIR,SIR ? ?
+ *
+ * Satell. 4090XCDT FIR,SIR ? ?
+ *
+ * Libretto 100CT FIR,SIR Toshiba Oboe
+ * Libretto 1000CT FIR,SIR Toshiba Oboe
+ *
+ * TECRA750DVD FIR,SIR Toshiba Oboe(Triangle) REV ID=14h
+ * TECRA780 FIR,SIR Toshiba Oboe(Sandlot) REV ID=32h,33h
+ * TECRA750CDT FIR,SIR Toshiba Oboe(Triangle) REV ID=13h,14h
+ * TECRA8000 FIR,SIR Toshiba Oboe(ISKUR) REV ID=23h
+ *
+ ********************************************************************/
+
+/* The documentation for this chip is allegedly released */
+/* However I have not seen it, not have I managed to contact */
+/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
+/* the documentation for this is freely available at */
+/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */
+/* The mapping between the registers in that document and the */
+/* Registers in the 701 oboe chip are as follows */
+
+
+/* 3922 reg 701 regs, by bit numbers */
+/* 7- 0 15- 8 24-16 31-25 */
+/* $28 0x0 0x1 */
+/* $2c SEE NOTE 1 */
+/* $30 0x6 0x7 */
+/* $34 0x8 0x9 SEE NOTE 2 */
+/* $38 0x10 0x11 */
+/* $3C 0xe SEE NOTE 3 */
+/* $40 0x12 0x13 */
+/* $44 0x14 0x15 */
+/* $48 0x16 0x17 */
+/* $4c 0x18 0x19 */
+/* $50 0x1a 0x1b */
+
+/* FIXME: could be 0x1b 0x1a here */
+
+/* $54 0x1d 0x1c */
+/* $5C 0xf SEE NOTE 4 */
+/* $130 SEE NOTE 5 */
+/* $134 SEE NOTE 6 */
+/* */
+/* NOTES: */
+/* 1. The pointer to ring is packed in most unceremoniusly */
+/* 701 Register Address bits (A9-A0 must be zero) */
+/* 0x4: A17 A16 A15 A14 A13 A12 A11 A10 */
+/* 0x5: A25 A24 A23 A22 A21 A20 A19 A18 */
+/* 0x2: 0 0 A31 A30 A29 A28 A27 A26 */
+/* */
+/* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922 */
+/* documentation would suggest that a write of 0x1 to 0x8 */
+/* would be more appropriate. */
+/* */
+/* 3. This assignment is tenuous at best, register 0xe seems to */
+/* have bits arranged 0 0 0 R/W R/W R/W R/W R/W */
+/* if either of the lower two bits are set the chip seems to */
+/* switch off */
+/* */
+/* 4. Bits 7-4 seem to be different 4 seems just to be generic */
+/* receiver busy flag */
+/* */
+/* 5. and 6. The IER and ISR have a different bit assignment */
+/* The lower three bits of both read back as ones */
+/* ISR is register 0xc, IER is register 0xd */
+/* 7 6 5 4 3 2 1 0 */
+/* 0xc: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
+/* 0xd: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */
+/* TxDone xmitt done (generated only if generate interrupt bit */
+/* is set in the ring) */
+/* RxDone recv completed (or other recv condition if you set it */
+/* up */
+/* TxUnder underflow in Transmit FIFO */
+/* RxOver overflow in Recv FIFO */
+/* SipRcv received serial gap (or other condition you set) */
+/* Interrupts are enabled by writing a one to the IER register */
+/* Interrupts are cleared by writting a one to the ISR register */
+/* */
+/* 6. The remaining registers: 0x6 and 0x3 appear to be */
+/* reserved parts of 16 or 32 bit registersthe remainder */
+/* 0xa 0xb 0x1e 0x1f could possibly be (by their behaviour) */
+/* the Unicast Filter register at $58. */
+/* */
+/* 7. While the core obviously expects 32 bit accesses all the */
+/* M$ drivers do 8 bit accesses, infact the Miniport ones */
+/* write and read back the byte serveral times (why?) */
+
+
+#ifndef TOSHOBOE_H
+#define TOSHOBOE_H
+
+/* Registers */
+
+#define OBOE_IO_EXTENT 0x1f
+
+/*Receive and transmit slot pointers */
+#define OBOE_REG(i) (i+(self->base))
+#define OBOE_RXSLOT OBOE_REG(0x0)
+#define OBOE_TXSLOT OBOE_REG(0x1)
+#define OBOE_SLOT_MASK 0x3f
+
+#define OBOE_TXRING_OFFSET 0x200
+#define OBOE_TXRING_OFFSET_IN_SLOTS 0x40
+
+/*pointer to the ring */
+#define OBOE_RING_BASE0 OBOE_REG(0x4)
+#define OBOE_RING_BASE1 OBOE_REG(0x5)
+#define OBOE_RING_BASE2 OBOE_REG(0x2)
+#define OBOE_RING_BASE3 OBOE_REG(0x3)
+
+/*Number of slots in the ring */
+#define OBOE_RING_SIZE OBOE_REG(0x7)
+#define OBOE_RING_SIZE_RX4 0x00
+#define OBOE_RING_SIZE_RX8 0x01
+#define OBOE_RING_SIZE_RX16 0x03
+#define OBOE_RING_SIZE_RX32 0x07
+#define OBOE_RING_SIZE_RX64 0x0f
+#define OBOE_RING_SIZE_TX4 0x00
+#define OBOE_RING_SIZE_TX8 0x10
+#define OBOE_RING_SIZE_TX16 0x30
+#define OBOE_RING_SIZE_TX32 0x70
+#define OBOE_RING_SIZE_TX64 0xf0
+
+#define OBOE_RING_MAX_SIZE 64
+
+/*Causes the gubbins to re-examine the ring */
+#define OBOE_PROMPT OBOE_REG(0x9)
+#define OBOE_PROMPT_BIT 0x1
+
+/* Interrupt Status Register */
+#define OBOE_ISR OBOE_REG(0xc)
+/* Interrupt Enable Register */
+#define OBOE_IER OBOE_REG(0xd)
+/* Interrupt bits for IER and ISR */
+#define OBOE_INT_TXDONE 0x80
+#define OBOE_INT_RXDONE 0x40
+#define OBOE_INT_TXUNDER 0x20
+#define OBOE_INT_RXOVER 0x10
+#define OBOE_INT_SIP 0x08
+#define OBOE_INT_MASK 0xf8
+
+/*Reset Register */
+#define OBOE_CONFIG1 OBOE_REG(0xe)
+#define OBOE_CONFIG1_RST 0x01
+#define OBOE_CONFIG1_DISABLE 0x02
+#define OBOE_CONFIG1_4 0x08
+#define OBOE_CONFIG1_8 0x08
+
+#define OBOE_CONFIG1_ON 0x8
+#define OBOE_CONFIG1_RESET 0xf
+#define OBOE_CONFIG1_OFF 0xe
+
+#define OBOE_STATUS OBOE_REG(0xf)
+#define OBOE_STATUS_RXBUSY 0x10
+#define OBOE_STATUS_FIRRX 0x04
+#define OBOE_STATUS_MIRRX 0x02
+#define OBOE_STATUS_SIRRX 0x01
+
+
+/*Speed control registers */
+#define OBOE_CONFIG0L OBOE_REG(0x10)
+#define OBOE_CONFIG0H OBOE_REG(0x11)
+
+#define OBOE_CONFIG0H_TXONLOOP 0x80 /*Transmit when looping (dangerous) */
+#define OBOE_CONFIG0H_LOOP 0x40 /*Loopback Tx->Rx */
+#define OBOE_CONFIG0H_ENTX 0x10 /*Enable Tx */
+#define OBOE_CONFIG0H_ENRX 0x08 /*Enable Rx */
+#define OBOE_CONFIG0H_ENDMAC 0x04 /*Enable/reset* the DMA controller */
+#define OBOE_CONFIG0H_RCVANY 0x02 /*DMA mode 1=bytes, 0=dwords */
+
+#define OBOE_CONFIG0L_CRC16 0x80 /*CRC 1=16 bit 0=32 bit */
+#define OBOE_CONFIG0L_ENFIR 0x40 /*Enable FIR */
+#define OBOE_CONFIG0L_ENMIR 0x20 /*Enable MIR */
+#define OBOE_CONFIG0L_ENSIR 0x10 /*Enable SIR */
+#define OBOE_CONFIG0L_ENSIRF 0x08 /*Enable SIR framer */
+#define OBOE_CONFIG0L_SIRTEST 0x04 /*Enable SIR framer in MIR and FIR */
+#define OBOE_CONFIG0L_INVERTTX 0x02 /*Invert Tx Line */
+#define OBOE_CONFIG0L_INVERTRX 0x01 /*Invert Rx Line */
+
+#define OBOE_BOF OBOE_REG(0x12)
+#define OBOE_EOF OBOE_REG(0x13)
+
+#define OBOE_ENABLEL OBOE_REG(0x14)
+#define OBOE_ENABLEH OBOE_REG(0x15)
+
+#define OBOE_ENABLEH_PHYANDCLOCK 0x80 /*Toggle low to copy config in */
+#define OBOE_ENABLEH_CONFIGERR 0x40
+#define OBOE_ENABLEH_FIRON 0x20
+#define OBOE_ENABLEH_MIRON 0x10
+#define OBOE_ENABLEH_SIRON 0x08
+#define OBOE_ENABLEH_ENTX 0x04
+#define OBOE_ENABLEH_ENRX 0x02
+#define OBOE_ENABLEH_CRC16 0x01
+
+#define OBOE_ENABLEL_BROADCAST 0x01
+
+#define OBOE_CURR_PCONFIGL OBOE_REG(0x16) /*Current config */
+#define OBOE_CURR_PCONFIGH OBOE_REG(0x17)
+
+#define OBOE_NEW_PCONFIGL OBOE_REG(0x18)
+#define OBOE_NEW_PCONFIGH OBOE_REG(0x19)
+
+#define OBOE_PCONFIGH_BAUDMASK 0xfc
+#define OBOE_PCONFIGH_WIDTHMASK 0x04
+#define OBOE_PCONFIGL_WIDTHMASK 0xe0
+#define OBOE_PCONFIGL_PREAMBLEMASK 0x1f
+
+#define OBOE_PCONFIG_BAUDMASK 0xfc00
+#define OBOE_PCONFIG_BAUDSHIFT 10
+#define OBOE_PCONFIG_WIDTHMASK 0x04e0
+#define OBOE_PCONFIG_WIDTHSHIFT 5
+#define OBOE_PCONFIG_PREAMBLEMASK 0x001f
+#define OBOE_PCONFIG_PREAMBLESHIFT 0
+
+#define OBOE_MAXLENL OBOE_REG(0x1a)
+#define OBOE_MAXLENH OBOE_REG(0x1b)
+
+#define OBOE_RXCOUNTH OBOE_REG(0x1c) /*Reset on recipt */
+#define OBOE_RXCOUNTL OBOE_REG(0x1d) /*of whole packet */
+
+/* The PCI ID of the OBOE chip */
+#ifndef PCI_DEVICE_ID_FIR701
+#define PCI_DEVICE_ID_FIR701 0x0701
+#endif
+
+#ifndef PCI_DEVICE_ID_FIRD01
+#define PCI_DEVICE_ID_FIRD01 0x0d01
+#endif
+
+struct OboeSlot
+{
+ __u16 len; /*Tweleve bits of packet length */
+ __u8 unused;
+ __u8 control; /*Slot control/status see below */
+ __u32 address; /*Slot buffer address */
+}
+__attribute__ ((packed));
+
+#define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS
+
+struct OboeRing
+{
+ struct OboeSlot rx[OBOE_NTASKS];
+ struct OboeSlot tx[OBOE_NTASKS];
+};
+
+#define OBOE_RING_LEN (sizeof(struct OboeRing))
+
+
+#define OBOE_CTL_TX_HW_OWNS 0x80 /*W/R This slot owned by the hardware */
+#define OBOE_CTL_TX_DISTX_CRC 0x40 /*W Disable CRC generation for [FM]IR */
+#define OBOE_CTL_TX_BAD_CRC 0x20 /*W Generate bad CRC */
+#define OBOE_CTL_TX_SIP 0x10 /*W Generate an SIP after xmittion */
+#define OBOE_CTL_TX_MKUNDER 0x08 /*W Generate an underrun error */
+#define OBOE_CTL_TX_RTCENTX 0x04 /*W Enable receiver and generate TXdone */
+ /* After this slot is processed */
+#define OBOE_CTL_TX_UNDER 0x01 /*R Set by hardware to indicate underrun */
+
+
+#define OBOE_CTL_RX_HW_OWNS 0x80 /*W/R This slot owned by hardware */
+#define OBOE_CTL_RX_PHYERR 0x40 /*R Decoder error on receiption */
+#define OBOE_CTL_RX_CRCERR 0x20 /*R CRC error only set for [FM]IR */
+#define OBOE_CTL_RX_LENGTH 0x10 /*R Packet > max Rx length */
+#define OBOE_CTL_RX_OVER 0x08 /*R set to indicate an overflow */
+#define OBOE_CTL_RX_SIRBAD 0x04 /*R SIR had BOF in packet or ABORT sequence */
+#define OBOE_CTL_RX_RXEOF 0x02 /*R Finished receiving on this slot */
+
+
+struct toshoboe_cb
+{
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+ struct net_device_stats stats;
+ struct tty_driver ttydev;
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+
+ chipio_t io; /* IrDA controller information */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ __u32 flags; /* Interface flags */
+
+ struct pci_dev *pdev; /*PCI device */
+ int base; /*IO base */
+
+
+ int txpending; /*how many tx's are pending */
+ int txs, rxs; /*Which slots are we at */
+
+ int irdad; /*Driver under control of netdev end */
+ int async; /*Driver under control of async end */
+
+
+ int stopped; /*Stopped by some or other APM stuff */
+
+ int filter; /*In SIR mode do we want to receive
+ frames or byte ranges */
+
+ void *ringbuf; /*The ring buffer */
+ struct OboeRing *ring; /*The ring */
+
+ void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers */
+ void *rx_bufs[OBOE_RING_MAX_SIZE];
+
+
+ int speed; /*Current setting of the speed */
+ int new_speed; /*Set to request a speed change */
+
+/* The spinlock protect critical parts of the driver.
+ * Locking is done like this :
+ * spin_lock_irqsave(&self->spinlock, flags);
+ * Releasing the lock :
+ * spin_unlock_irqrestore(&self->spinlock, flags);
+ */
+ spinlock_t spinlock;
+ /* Used for the probe and diagnostics code */
+ int int_rx;
+ int int_tx;
+ int int_txunder;
+ int int_rxover;
+ int int_sip;
+};
+
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/