--=_courier-31351-1043666815-0001-2
Content-Type: multipart/mixed; boundary="=-z/GrnHBmUefLBW1KcRUP"
--=-z/GrnHBmUefLBW1KcRUP
Content-Type: text/plain
Content-Transfer-Encoding: quoted-printable
Hi,
I'm using v1.10 of the sundance driver for DFE-580TX (on 2.4.19), I have
5 of these cards in a system. Every few weeks all networking on the box
stops working, only a reboot can fix it. (not tried unloading and
reloading the modules yet, box is miles away to get to keyboard).
Problem does not appear to be reproducable.
Is this a known problem, is there a solution, if not, would you like
some more debugging information?
Thanks.
Attached is lspci -vv, and /proc/interrupts output.
--=20
// Gianni Tedesco (gianni at scaramanga dot co dot uk)
lynx --source www.scaramanga.co.uk/gianni-at-ecsc.asc | gpg --import
8646BE7D: 6D9F 2287 870E A2C9 8F60 3A3C 91B5 7669 8646 BE7D
--=-z/GrnHBmUefLBW1KcRUP
Content-Disposition: attachment; filename=lspci
Content-Type: text/plain; name=lspci; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
00:00.0 Host bridge: ServerWorks CNB20HE Host Bridge (rev 23)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- <TAbort- =
<MAbort- >SERR- <PERR-
00:00.1 Host bridge: ServerWorks CNB20HE Host Bridge (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort+ >SERR- <PERR-
Latency: 64, cache line size 08
00:00.2 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort+ >SERR- <PERR-
00:00.3 Host bridge: ServerWorks: Unknown device 0006 (rev 01)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort+ >SERR- <PERR-
00:03.0 System peripheral: Compaq Computer Corporation Advanced System Mana=
gement Controller
Subsystem: Compaq Computer Corporation: Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1800 [size=3D256]
Region 1: Memory at f7df0000 (32-bit, non-prefetchable) [size=3D256]
00:04.0 RAID bus controller: Symbios Logic Inc. (formerly NCR): Unknown dev=
ice 0010 (rev 02)
Subsystem: Compaq Computer Corporation: Unknown device 4040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 192 (7500ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 2000 [size=3D256]
Region 1: Memory at f6000000 (32-bit, non-prefetchable) [size=3D16M]
Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=3D16M]
Expansion ROM at <unassigned> [disabled] [size=3D512K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC =
[Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Region 0: Memory at f3000000 (32-bit, prefetchable) [size=3D16M]
Region 1: I/O ports at 2400 [size=3D256]
Region 2: Memory at f4ff0000 (32-bit, non-prefetchable) [size=3D4K]
Expansion ROM at <unassigned> [disabled] [size=3D128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
00:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Nor=
mal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=3D00, secondary=3D01, subordinate=3D01, sec-latency=3D64
I/O behind bridge: 00003000-00003fff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Bridge: PM- B3+
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51)
Subsystem: ServerWorks OSB4 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi=
ng- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 0
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller (prog-if 8a [Master =
SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 2800 [size=3D16]
01:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 3000 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
01:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3080 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
01:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 3400 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
01:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 3480 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
02:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Co=
ntroller (rev 12)
Subsystem: Compaq Computer Corporation: Unknown device a2f8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f7ef0000 (32-bit, non-prefetchable) [size=3D256]
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=3D0/0 Enable=
-
Address: 0000000000000000 Data: 0000
02:06.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Nor=
mal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=3D02, secondary=3D03, subordinate=3D03, sec-latency=3D64
I/O behind bridge: 00004000-00004fff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Bridge: PM- B3+
02:08.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Nor=
mal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=3D02, secondary=3D04, subordinate=3D04, sec-latency=3D64
I/O behind bridge: 00005000-00005fff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Bridge: PM- B3+
02:09.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Nor=
mal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=3D02, secondary=3D05, subordinate=3D05, sec-latency=3D64
I/O behind bridge: 00006000-00006fff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Bridge: PM- B3+
03:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 4000 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
03:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 4080 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
03:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 4400 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
03:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 4480 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
04:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 5000 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
04:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 5080 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
04:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 5400 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
04:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 5480 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
05:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 6000 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
05:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 6080 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
05:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 6400 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
05:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 6480 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
07:05.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Co=
ntroller (rev 12)
Subsystem: Compaq Computer Corporation: Unknown device a2f9
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f7ff0000 (32-bit, non-prefetchable) [size=3D256]
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=3D0/0 Enable=
-
Address: 0000000000000000 Data: 0000
07:07.0 PCI bridge: Intel Corporation: Unknown device b152 (prog-if 00 [Nor=
mal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Bus: primary=3D07, secondary=3D08, subordinate=3D08, sec-latency=3D64
I/O behind bridge: 00007000-00007fff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col=
d-)
Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME-
Bridge: PM- B3+
08:04.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 7000 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
08:05.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 7080 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
08:06.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 7400 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
08:07.0 Ethernet controller: D-Link System Inc: Unknown device 1002 (rev 12=
)
Subsystem: D-Link System Inc: Unknown device 1012
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Steppi=
ng- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- <TAbort=
- <MAbort- >SERR- <PERR-
Latency: 64 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 7480 [size=3D128]
Expansion ROM at <unassigned> [disabled] [size=3D64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col=
d+)
Status: D0 PME-Enable+ DSel=3D0 DScale=3D2 PME-
--=-z/GrnHBmUefLBW1KcRUP
Content-Disposition: attachment; filename=intr
Content-Type: text/plain; name=intr; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
CPU0 =20
0: 4482909 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 11286193 XT-PIC eth0, eth2, eth9, eth11
5: 228654 XT-PIC ida0
8: 1 XT-PIC rtc
11: 10898381 XT-PIC eth1, eth3, eth8, eth10
14: 3 XT-PIC ide0
15: 4224483 XT-PIC eth4, eth5, eth6, eth7, eth12, eth13, eth1=
4, eth15, eth16, eth17, eth18, eth19
NMI: 0=20
LOC: 4483084=20
ERR: 0
MIS: 0
--=-z/GrnHBmUefLBW1KcRUP--
--=_courier-31351-1043666815-0001-2
Content-Type: application/pgp-signature; name="signature.asc"
Content-Transfer-Encoding: 7bit
Content-Description: This is a digitally signed message part
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQA+NRaEkbV2aYZGvn0RAkgZAJ0WfKxFAveWruFMtkbU6erQn79AQgCfco0K
suQeb+pEzZ9Sru+Pit4VI9w=
=/4Js
-----END PGP SIGNATURE-----
--=_courier-31351-1043666815-0001-2--