On Tue, January 28 2003 8:09 pm, you wrote:
> Chuck Burns <zex0s@mchsi.com> wrote:
> > Having recently upgraded my Mandrake 9.0 Laptop to the latest Mandrake
> > cooker (9.1beta) it uses the 2.4.21pre3 kernel. A problem has occured
> > somewhere between 2.4.19 and 2.4.21pre3, with regards to the 3c59x driver
> > module. It incorrectly returns the MAC address for my IBM Thinkpad a20m
> > with 3com integrated PCI 10/100M ethernet/Modem combo card. (the Nic is a
> > 3com 3c556b, which is supported under the 3c59x module) The 2.4.19
> > kernel module accurately reports the MAC address.
> >
> > The 2.4.21pre3 MAC address reported for my card is FF:FF:FF:FF:FF:FF,
> > which, obviously, is incorrect. I have never submitted a bug report
> > before, so I am not quite sure what all information you need.. there is
> > no error message associated with this
>
> Yup, seen a couple of these. It appears that the PCI and/or Cardbus code
> broke the 3com driver.
>
> Please send the full `dmesg' output so we can see the kernel boot messages
> and also the `lspci -vx -s' output for that device.
Attached are files with the output of:
/proc/cpuinfo
dmesg
lspcidrake -f -v (thats the closest thing to lspci I have.. the -f -v says do
a full probe, and be verbose.. if thats not enough info, I will try to find
sources versions of the lspcitools and compile them....)
-- Chuck Burns, Jr <zex0s@mchsi.com> -----------==========----------- When the cup is full, carry it level.-- Chuck Burns, Jr <zex0s@mchsi.com> -----------===========----------- Yow! I want my nose in lights!--Boundary-00=_kVDO+kWpOl8lGYn Content-Type: text/plain; charset="us-ascii"; name="cpuinfo" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="cpuinfo"
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 1 cpu MHz : 498.787 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 996.14
--Boundary-00=_kVDO+kWpOl8lGYn Content-Type: text/plain; charset="us-ascii"; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg"
Linux version 2.4.21pre3-2mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2.1 (Mandrake Linux 9.1 3.2.1-2mdk)) #1 Thu Jan 23 23:18:06 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bff0000 (usable) BIOS-e820: 000000000bff0000 - 000000000bffec00 (ACPI data) BIOS-e820: 000000000bffec00 - 000000000c000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 191MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 49136 zone(0): 4096 pages. zone(1): 45040 pages. zone(2): 0 pages. ACPI: RSDP (v000 PTLTD ) @ 0x000f6b30 ACPI: RSDT (v001 PTLTD RSDT 01540.04384) @ 0x0bff596d ACPI: FADT (v001 IBM TP-A20M 01540.04384) @ 0x0bffeb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.04384) @ 0x0bffebd9 ACPI: DSDT (v001 IBM TP A20m 01540.04384) @ 0x00000000 ACPI: BIOS passes blacklist ACPI: MADT not present IBM machine detected. Enabling interrupts during APM calls. Kernel command line: BOOT_IMAGE=linux ro root=302 devfs=mount Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 Detected 498.794 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 996.14 BogoMIPS Memory: 191632k/196544k available (1330k kernel code, 4524k reserved, 512k data, 144k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021212 PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 ACPI-0263: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PSER] (off) ACPI: Power Resource [PSIO] (on) ACPI: Embedded Controller [EC] (gpe 9) schedule_task(): keventd has not started PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: overridden by ACPI. Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1c00-0x1c07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c08-0x1c0f, BIOS settings: hdc:DMA, hdd:pio hda: IBM-DARA-206000, ATA DISK drive blk: queue c0325100, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA CD-ROM XM-7002B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 11733120 sectors (6007 MB) w/418KiB Cache, CHS=776/240/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 82k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 144k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 23:52:44 Jan 23 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0x1c20, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error hub.c: new USB device 00:07.2-1, assigned address 2 ide: no cache flush required. ide: no cache flush required. usb.c: USB device 2 (vend/prod 0x47d/0x101f) is not claimed by any active driver. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 514040k swap-space (priority -1) usb.c: registered new driver usb_mouse input0: Kensington Kensington PocketMouse Pro on usb1:2.0 usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice PCI: Enabling device 00:03.0 (0000 -> 0003) 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:03.0: 3Com PCI 3c556B Laptop Hurricane at 0x1400. Vers LK1.1.16 PCI: Setting latency timer of device 00:03.0 to 64 eth0: command 0x5800 did not complete! Status=0xffff eth0: command 0x2804 did not complete! Status=0xffff Linux Kernel Card Services Kernel Version options: [pci] [cardbus] [pm] Yenta IRQ list 04b8, PCI irq11 Socket status: 30000006 Yenta IRQ list 04b8, PCI irq11 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x3bc [PCSPP,TRISTATE] lp0: using parport0 (polling).
--Boundary-00=_kVDO+kWpOl8lGYn Content-Type: text/plain; charset="us-ascii"; name="lspci" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lspci"
agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge [BRIDGE_HOST] (vendor:8086 device:7190) unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge [BRIDGE_PCI] (vendor:8086 device:7191) yenta_socket : Texas Instruments|PCI1221 PC card CardBus Controller [BRIDGE_CARDBUS] (vendor:104c device:ac1b subv:4000 subd:0000) yenta_socket : Texas Instruments|PCI1221 PC card CardBus Controller [BRIDGE_CARDBUS] (vendor:104c device:ac1b subv:4800 subd:0000) 3c59x : 3Com Corporation|3C556 10/100 Mini PCI Fast Ethernet Adapter [NETWORK_ETHERNET] (vendor:10b7 device:6056 subv:10b7 subd:6356) unknown : 3Com Corporation|3C556 V.90 Mini-PCI Modem [COMMUNICATION_OTHER] (vendor:10b7 device:1007 subv:10b7 subd:6159) snd-cs46xx : Cirrus Logic|CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] [MULTIMEDIA_AUDIO] (vendor:1013 device:6003 subv:1014 subd:0153) unknown : Intel Corporation|82371AB PIIX4 ISA [BRIDGE_OTHER] (vendor:8086 device:7110) unknown : Intel Corporation|82371AB PIIX4 IDE [STORAGE_IDE] (vendor:8086 device:7111) usb-uhci : Intel Corporation|82371AB PIIX4 USB [SERIAL_USB] (vendor:8086 device:7112) sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller [BRIDGE_OTHER] (vendor:8086 device:7113) Card:ATI Rage Mobility: ATI|Rage Mobility P/M AGP 2x [DISPLAY_VGA] (vendor:1002 device:4c4d subv:1014 subd:0154) unknown : Unknown|USB UHCI Root Hub [Hub|Root Hub] (vendor:0000 device:0000) unknown : Kensington|Kensington PocketMouse Pro [Human Interface Devices|Boot Interface Subclass|Mouse] (vendor:047d device:101f)
--Boundary-00=_kVDO+kWpOl8lGYn--
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/