PROBLEM: Computer freezes completely when I insert a data cd in

Wendigo (wendigo2@terra.com.pe)
Tue, 04 Feb 2003 02:22:09 -0500


Linux harpia.kamehouse.net 2.4.18-18.8.0 #1 Thu Nov 14 00:10:29 EST 2002
i686 i686 i386 GNU/Linux

1.] The computer freezes completely when I insert data CDs in CD-R/RW Samsung 408B
[2.] The ide driver is attached as slave in the secondary channel. The Master es is MatshitaDVD-ROM SR8585
[3.] CD-R, CD-RW, Samsund drive
[4.] kernel version 2.4.18-18.8.0
[7.] Environment: Redhat 8.0 problem occurs is Gnome and KDE
[7.1.] Software (add the output of the ver_linux script here)

Gnu C gcc (GCC) 3.2 20020903 (Red Hat Linux 8.0 3.2-7) Copyright
(C) 2002 Free Software Foundation, Inc. Esto es software libre; vea el código

para las condiciones de copia. NO hay garantía; ni siquiera para MERCANTIBILIDAD o IDONEIDAD PARA UN PROPÓSITO EN PARTICULAR

Gnu make 3.79.1

util-linux 2.11r

mount 2.11r

modutils 2.4.18

e2fsprogs 1.27

pcmcia-cs 3.1.31

PPP 2.4.1

isdn4k-utils 3.1pre4

Linux C Library 2.2.93

Dynamic linker (ldd) 2.2.93

Procps 2.0.7

Net-tools 1.60

Kbd 1.06

Sh-utils 2.0.12

Modules Loaded sr_mod emu10k1 ac97_codec sound soundcore agpgart nvidia

binfmt_misc parport_pc lp parport autofs 8139too mii ipt_REJECT iptable_filter
ip_tables ide-scsi scsi_mod ide-cd cdrom nls_iso8859-1 nls_cp437 vfat fat
mousedev keybdev hid input usb-uhci usbcore ext3 jbd

[7.2.] Processor information (from /proc/cpuinfo):

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 10
cpu MHz : 994.561
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1976.57


[7.3.] Module information (from /proc/modules):

sr_mod 18168 0 (autoclean)
emu10k1 68744 1 (autoclean)
ac97_codec 13416 0 (autoclean) [emu10k1]
sound 74388 0 (autoclean) [emu10k1]
soundcore 6532 7 (autoclean) [emu10k1 sound]
agpgart 43136 3 (autoclean)
nvidia 1592160 10 (autoclean)
binfmt_misc 7524 1
parport_pc 19108 1 (autoclean)
lp 8996 0 (autoclean)
parport 37152 1 (autoclean) [parport_pc lp]
autofs 13348 0 (autoclean) (unused)
8139too 17704 1
mii 2156 0 [8139too]
ipt_REJECT 3736 6 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 14936 2 [ipt_REJECT iptable_filter]
ide-scsi 10512 0
scsi_mod 107240 2 [sr_mod ide-scsi]
ide-cd 33608 0
cdrom 33696 0 [sr_mod ide-cd]
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5148 1 (autoclean)
vfat 13084 1 (autoclean)
fat 38712 0 (autoclean) [vfat]
mousedev 5524 1
keybdev 2976 0 (unused)
hid 22244 0 (unused)
input 5920 0 [mousedev keybdev hid]
usb-uhci 26188 0 (unused)
usbcore 77024 1 [hid usb-uhci]
ext3 70368 2
jbd 52212 2 [ext3]

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
d800-d8ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
d800-d8ff : 8139too
df80-df9f : Creative Labs SB Live! EMU10k1
df80-df9f : EMU10K1
dff0-dff7 : Creative Labs SB Live! MIDI/Game Port
ef40-ef5f : Intel Corp. 82801BA/BAM USB (Hub #1)
ef40-ef5f : usb-uhci
ef80-ef9f : Intel Corp. 82801BA/BAM USB (Hub #2)
ef80-ef9f : usb-uhci
efa0-efaf : Intel Corp. 82801BA/BAM SMBus
ffa0-ffaf : Intel Corp. 82801BA IDE U100
ffa0-ffa7 : ide0
ffa8-ffaf : ide1

00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000ca800-000cb7ff : Extension ROM
000f0000-000fffff : System ROM
00100000-1ffbffff : System RAM
00100000-002488da : Kernel code
002488db-0033fe63 : Kernel data
1ffc0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
f04ffc00-f04ffcff : Motorola SM56 PCI Modem
f0500000-f45fffff : PCI Bus #02
f2000000-f3ffffff : nVidia Corporation Vanta [NV6]
f8000000-fbffffff : Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub
fc800000-fc8fffff : Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder
fc9ffc00-fc9ffcff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C
fc9ffc00-fc9ffcff : 8139too
fca00000-feafffff : PCI Bus #02
fd000000-fdffffff : nVidia Corporation Vanta [NV6]
ffb80000-ffbfffff : reserved
fff00000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
Subsystem: Intel Corp.: Unknown device 4532
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [88] #09 [f104]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x4

00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fca00000-feafffff
Prefetchable memory behind bridge: f0500000-f45fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fc700000-fc9fffff
Prefetchable memory behind bridge: f0400000-f04fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 11) (prog-if 80 [Master])
Subsystem: Intel Corp.: Unknown device 4532
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: [virtual] I/O ports at 01f0
Region 1: [virtual] I/O ports at 03f4
Region 2: [virtual] I/O ports at 0170
Region 3: [virtual] I/O ports at 0374
Region 4: I/O ports at ffa0 [size=16]

00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 11) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4532
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at ef40 [size=32]

00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 11)
Subsystem: Intel Corp.: Unknown device 4532
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at efa0 [size=16]

00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 11) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4532
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 9
Region 4: I/O ports at ef80 [size=32]

01:09.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD
Decoder (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at fc9ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at fc9e0000 [disabled] [size=64K]

01:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs: Unknown device 8064
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at df80 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at dff0 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0c.0 Communication controller: Motorola SM56 PCI Modem
Subsystem: CIS Technology Inc SM56 PCI Speakerphone Modem
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 63750ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f04ffc00 (32-bit, prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:00.0 VGA compatible controller: nVidia Corporation NV6 [Vanta] (rev 15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f2000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at feaf0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x4

[7.6.] SCSI information (from /proc/scsi/scsi)

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-R/RW SW-408B Rev: BS02
Type: CD-ROM ANSI SCSI revision: 02

-- 
My opinions may have changed, but not the fact that I am right.
-- Ashleigh Brilliant

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/