Re: Promise FastTrak TX4 losing interrupts (with apic mode)

[Stephan van Hienen]

On Thu, 6 Feb 2003, Peter L. Ashford wrote:

> I just saw, and fixed, a very similar problem last night (lost interrupts,
> but partition table was eventually read).  The system was a dual Xeon on a
> P4DP6.  The Promise card was an Ultra100TX2.  The OS was RedHat 7.3.
>
> The fix was to increase the bus master time for the PCI slot in the BIOS.
> This was also tried under SuSE 8.1, where it did NOT work.

ultra100tx2 / ultra66 cards work ok in the machines i tested it in (and
also the onboard fasttrak100 on the xeon server (intel mainbord))