PATCH: merge lp driver for PC98xx systems

[Alan Cox]

diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.5.65/drivers/char/lp_old98.c linux-2.5.65-ac2/drivers/char/lp_old98.c
--- linux-2.5.65/drivers/char/lp_old98.c	1970-01-01 01:00:00.000000000 +0100
+++ linux-2.5.65-ac2/drivers/char/lp_old98.c	2003-03-14 01:23:19.000000000 +0000
@@ -0,0 +1,544 @@
+/*
+ *	linux/drivers/char/lp_old98.c
+ *
+ * printer port driver for ancient PC-9800s with no bidirectional port support
+ *
+ * Copyright (C)  1998,99  Kousuke Takai <[e-mail]>,
+ *			   Kyoto University Microcomputer Club
+ *
+ * This driver is based on and has compatibility with `lp.c',
+ * generic PC printer port driver.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/version.h>
+#include <linux/fs.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include <linux/lp.h>
+
+/*
+ *  I/O port numbers
+ */
+#define	LP_PORT_DATA	0x40
+#define	LP_PORT_STATUS	(LP_PORT_DATA + 2)
+#define	LP_PORT_STROBE	(LP_PORT_DATA + 4)
+#define LP_PORT_CONTROL	(LP_PORT_DATA + 6)
+
+#define	LP_PORT_H98MODE	0x0448
+#define	LP_PORT_EXTMODE	0x0149
+
+/*
+ *  bit mask for I/O
+ */
+#define	LP_MASK_nBUSY	(1 << 2)
+#define	LP_MASK_nSTROBE	(1 << 7)
+
+#define LP_CONTROL_ASSERT_STROBE	(0x0e)
+#define LP_CONTROL_NEGATE_STROBE	(0x0f)
+
+/*
+ *  Acceptable maximum value for non-privileged user for LPCHARS ioctl.
+ */
+#define LP_CHARS_NOPRIV_MAX	65535
+
+#define	DC1	'\x11'
+#define	DC3	'\x13'
+
+/* PC-9800s have at least and at most one old-style printer port. */
+static struct lp_struct lp = {
+	.flags	= LP_EXIST | LP_ABORTOPEN,
+	.chars	= LP_INIT_CHAR,
+	.time	= LP_INIT_TIME,
+	.wait	= LP_INIT_WAIT,
+};
+
+static	int	dc1_check;
+static spinlock_t lp_old98_lock = SPIN_LOCK_UNLOCKED;
+
+
+#undef LP_OLD98_DEBUG
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+static struct console lp_old98_console;		/* defined later */
+static short saved_console_flags;
+#endif
+
+static DECLARE_WAIT_QUEUE_HEAD (lp_old98_waitq);
+
+static void lp_old98_timer_function(unsigned long data)
+{
+	if (inb(LP_PORT_STATUS) & LP_MASK_nBUSY)
+		wake_up_interruptible(&lp_old98_waitq);
+	else {
+		struct timer_list *t = (struct timer_list *) data;
+
+		t->expires = jiffies + 1;
+		add_timer(t);
+	}
+}
+
+static inline int lp_old98_wait_ready(void)
+{
+	struct timer_list timer;
+
+	init_timer(&timer);
+	timer.function = lp_old98_timer_function;
+	timer.expires = jiffies + 1;
+	timer.data = (unsigned long)&timer;
+	add_timer(&timer);
+	interruptible_sleep_on(&lp_old98_waitq);
+	del_timer(&timer);
+	return signal_pending(current);
+}
+
+static inline int lp_old98_char(char lpchar)
+{
+	unsigned long count = 0;
+#ifdef LP_STATS
+	int tmp;
+#endif
+
+	while (!(inb(LP_PORT_STATUS) & LP_MASK_nBUSY)) {
+		count++;
+		if (count >= lp.chars)
+			return 0;
+	}
+
+	outb(lpchar, LP_PORT_DATA);
+
+#ifdef LP_STATS
+	/*
+	 *  Update lp statsistics here (and between next two outb()'s).
+	 *  Time to compute it is part of storobe delay.
+	 */
+	if (count > lp.stats.maxwait) {
+#ifdef LP_OLD98_DEBUG
+		printk(KERN_DEBUG "lp_old98: success after %d counts.\n",
+		       count);
+#endif
+		lp.stats.maxwait = count;
+	}
+	count *= 256;
+	tmp = count - lp.stats.meanwait;
+	if (tmp < 0)
+		tmp = -tmp;
+#endif
+	ndelay(lp.wait);
+    
+	/* negate PSTB# (activate strobe)	*/
+	outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+
+#ifdef LP_STATS
+	lp.stats.meanwait = (255 * lp.stats.meanwait + count + 128) / 256;
+	lp.stats.mdev = (127 * lp.stats.mdev + tmp + 64) / 128;
+	lp.stats.chars ++;
+#endif
+
+	ndelay(lp.wait);
+
+	/* assert PSTB# (deactivate strobe)	*/
+	outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+
+	return 1;
+}
+
+static ssize_t lp_old98_write(struct file * file,
+			      const char * buf, size_t count,
+			      loff_t *dummy)
+{
+	unsigned long total_bytes_written = 0;
+
+	if (!access_ok(VERIFY_READ, buf, count))
+		return -EFAULT;
+
+#ifdef LP_STATS
+	if (jiffies - lp.lastcall > lp.time)
+		lp.runchars = 0;
+	lp.lastcall = jiffies;
+#endif
+
+	do {
+		unsigned long bytes_written = 0;
+		unsigned long copy_size
+			= (count < LP_BUFFER_SIZE ? count : LP_BUFFER_SIZE);
+
+		if (__copy_from_user(lp.lp_buffer, buf, copy_size))
+			return -EFAULT;
+
+		while (bytes_written < copy_size) {
+			if (lp_old98_char(lp.lp_buffer[bytes_written]))
+				bytes_written ++;
+			else {
+#ifdef LP_STATS
+				int rc = lp.runchars + bytes_written;
+
+				if (rc > lp.stats.maxrun)
+					lp.stats.maxrun = rc;
+
+				lp.stats.sleeps ++;
+#endif
+#ifdef LP_OLD98_DEBUG
+				printk(KERN_DEBUG
+				       "lp_old98: sleeping at %d characters"
+				       " for %d jiffies\n",
+				       lp.runchars, lp.time);
+				lp.runchars = 0;
+#endif
+				if (lp_old98_wait_ready())
+					return ((total_bytes_written
+						 + bytes_written)
+						? : -EINTR);
+			}
+		}
+		total_bytes_written += bytes_written;
+		buf += bytes_written;
+#ifdef LP_STATS
+		lp.runchars += bytes_written;
+#endif
+		count -= bytes_written;
+	} while (count > 0);
+
+	return total_bytes_written;
+}
+
+static int lp_old98_open(struct inode * inode, struct file * file)
+{
+	if (minor(inode->i_rdev) != 0)
+		return -ENXIO;
+
+	if (lp.flags & LP_BUSY)
+		return -EBUSY;
+
+	if (dc1_check && (lp.flags & LP_ABORTOPEN)
+	    && !(file->f_flags & O_NONBLOCK)) {
+		/*
+		 *  Check whether printer is on-line.
+		 *  PC-9800's old style port have only BUSY# as status input,
+		 *  so that it is impossible to distinguish that the printer is
+		 *  ready and that the printer is off-line or not connected
+		 *  (in both case BUSY# is in the same state). So:
+		 *
+		 *    (1) output DC1 (0x11) to printer port and do strobe.
+		 *    (2) watch BUSY# line for a while. If BUSY# is pulled
+		 *	  down, the printer will be ready. Otherwise,
+		 *	  it will be off-line (or not connected, or power-off,
+		 *	   ...).
+		 *
+		 *  The source of this procedure:
+		 *	Terumasa KODAKA, Kazufumi SHIMIZU, Yu HAYAMI:
+		 *		`PC-9801 Super Technique', Ascii, 1992.
+		 */
+		int count;
+		unsigned long flags;
+
+		/* interrupts while check is fairly bad */
+		spin_lock_irqsave(&lp_old98_lock, flags);
+
+		if (!lp_old98_char(DC1)) {
+			spin_unlock_irqrestore(&lp_old98_lock, flags);
+			return -EBUSY;
+		}
+		count = (unsigned int)dc1_check > 10000 ? 10000 : dc1_check;
+		while (inb(LP_PORT_STATUS) & LP_MASK_nBUSY) {
+			if (--count == 0) {
+				spin_unlock_irqrestore(&lp_old98_lock, flags);
+				return -ENODEV;
+			}
+		}
+		spin_unlock_irqrestore(&lp_old98_lock, flags);
+	}
+
+	if ((lp.lp_buffer = kmalloc(LP_BUFFER_SIZE, GFP_KERNEL)) == NULL)
+		return -ENOMEM;
+
+	lp.flags |= LP_BUSY;
+
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+	saved_console_flags = lp_old98_console.flags;
+	lp_old98_console.flags &= ~CON_ENABLED;
+#endif
+	return 0;
+}
+
+static int lp_old98_release(struct inode * inode, struct file * file)
+{
+	kfree(lp.lp_buffer);
+	lp.lp_buffer = NULL;
+	lp.flags &= ~LP_BUSY;
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+	lp_old98_console.flags = saved_console_flags;
+#endif
+	return 0;
+}
+
+static int lp_old98_init_device(void)
+{
+	unsigned char data;
+
+	if ((data = inb(LP_PORT_EXTMODE)) != 0xFF && (data & 0x10)) {
+		printk(KERN_INFO
+		       "lp_old98: shutting down extended parallel port mode...\n");
+		outb(data & ~0x10, LP_PORT_EXTMODE);
+	}
+#ifdef	PC98_HW_H98
+	if ((pc98_hw_flags & PC98_HW_H98)
+	    && ((data = inb(LP_PORT_H98MODE)) & 0x01)) {
+		printk(KERN_INFO
+		       "lp_old98: shutting down H98 full centronics mode...\n");
+		outb(data & ~0x01, LP_PORT_H98MODE);
+	}
+#endif
+	return 0;
+}
+
+static int lp_old98_ioctl(struct inode *inode, struct file *file,
+			  unsigned int command, unsigned long arg)
+{
+	int retval = 0;
+
+	switch (command) {
+	case LPTIME:
+		lp.time = arg * HZ/100;
+		break;
+	case LPCHAR:
+		lp.chars = arg;
+		break;
+	case LPABORT:
+		if (arg)
+			lp.flags |= LP_ABORT;
+		else
+			lp.flags &= ~LP_ABORT;
+		break;
+	case LPABORTOPEN:
+		if (arg)
+			lp.flags |= LP_ABORTOPEN;
+		else
+			lp.flags &= ~LP_ABORTOPEN;
+		break;
+	case LPCAREFUL:
+		/* do nothing */
+		break;
+	case LPWAIT:
+		lp.wait = arg;
+		break;
+	case LPGETIRQ:
+		retval = put_user(0, (int *)arg);
+		break;
+	case LPGETSTATUS:
+		/*
+		 * convert PC-9800's status to IBM PC's one, so that tunelp(8)
+		 * works in the same way on this driver.
+		 */
+		retval = put_user((inb(LP_PORT_STATUS) & LP_MASK_nBUSY)
+					? (LP_PBUSY | LP_PERRORP) : LP_PERRORP,
+					(int *)arg);
+		break;
+	case LPRESET:
+		retval = lp_old98_init_device();
+		break;
+#ifdef LP_STATS
+	case LPGETSTATS:
+		if (copy_to_user((struct lp_stats *)arg, &lp.stats,
+				 sizeof(struct lp_stats)))
+			retval = -EFAULT;
+		else if (suser())
+			memset(&lp.stats, 0, sizeof(struct lp_stats));
+		break;
+#endif
+	case LPGETFLAGS:
+		retval = put_user(lp.flags, (int *)arg);
+		break;
+	case LPSETIRQ: 
+	default:
+		retval = -EINVAL;
+	}
+	return retval;
+}
+
+static struct file_operations lp_old98_fops = {
+	.owner		= THIS_MODULE,
+	.write		= lp_old98_write,
+	.ioctl		= lp_old98_ioctl,
+	.open		= lp_old98_open,
+	.release	= lp_old98_release,
+};
+
+/*
+ *  Support for console on lp_old98
+ */
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+
+static inline void io_delay(void)
+{
+	unsigned char dummy;	/* actually not output */
+
+	asm volatile ("out%B0 %0,%1" : "=a"(dummy) : "N"(0x5f));
+}
+
+static void lp_old98_console_write(struct console *console,
+				    const char *s, unsigned int count)
+{
+	int i;
+	static unsigned int timeout_run = 0;
+
+	while (count) {
+		/* wait approx 1.2 seconds */
+		for (i = 2000000; !(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+								io_delay())
+			if (!--i) {
+				if (++timeout_run >= 10)
+					/* disable forever... */
+					console->flags &= ~CON_ENABLED;
+				return;
+			}
+
+		timeout_run = 0;
+
+		if (*s == '\n') {
+			outb('\r', LP_PORT_DATA);
+			io_delay();
+			io_delay();
+			outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+			io_delay();
+			io_delay();
+			outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+			io_delay();
+			io_delay();
+			for (i = 1000000;
+					!(inb(LP_PORT_STATUS) & LP_MASK_nBUSY);
+					io_delay())
+				if (!--i)
+					return;
+		}
+
+		outb(*s++, LP_PORT_DATA);
+		io_delay();
+		io_delay();
+		outb(LP_CONTROL_ASSERT_STROBE, LP_PORT_CONTROL);
+		io_delay();
+		io_delay();
+		outb(LP_CONTROL_NEGATE_STROBE, LP_PORT_CONTROL);
+		io_delay();
+		io_delay();
+
+		--count;
+	}
+}
+
+static kdev_t lp_old98_console_device(struct console *console)
+{
+	return mk_kdev(LP_MAJOR, 0);
+}
+
+static struct console lp_old98_console = {
+	.name	= "lp_old98",
+	.write	= lp_old98_console_write,
+	.device	= lp_old98_console_device,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
+};
+
+#endif	/* console on lp_old98 */
+
+static int __init lp_old98_init(void)
+{
+	char *errmsg = "I/O ports already occupied, giving up.";
+
+#ifdef	PC98_HW_H98
+	if (pc98_hw_flags & PC98_HW_H98)
+	    if (!request_region(LP_PORT_H98MODE, 1, "lp_old98")
+		goto err1;
+#endif
+	if (!request_region(LP_PORT_DATA,   1, "lp_old98"))
+		goto err2;
+	if (!request_region(LP_PORT_STATUS, 1, "lp_old98"))
+		goto err3;
+	if (!request_region(LP_PORT_STROBE, 1, "lp_old98"))
+		goto err4;
+	if (!request_region(LP_PORT_EXTMODE, 1, "lp_old98"))
+		goto err5;
+	if (!register_chrdev(LP_MAJOR, "lp", &lp_old98_fops)) {
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+		register_console(&lp_old98_console);
+		printk(KERN_INFO "lp_old98: console ready\n");
+#endif
+		/*
+		 * rest are not needed by this driver,
+		 * but for locking out other printer drivers...
+		 */
+		lp_old98_init_device();
+		return 0;
+	} else
+		errmsg = "unable to register device";
+
+	release_region(LP_PORT_EXTMODE, 1);
+err5:
+	release_region(LP_PORT_STROBE, 1);
+err4:
+	release_region(LP_PORT_STATUS, 1);
+err3:
+	release_region(LP_PORT_DATA, 1);
+err2:
+#ifdef	PC98_HW_H98
+	if (pc98_hw_flags & PC98_HW_H98)
+	    release_region(LP_PORT_H98MODE, 1);
+
+err1:
+#endif
+	printk(KERN_ERR "lp_old98: %s\n", errmsg);
+	return -EBUSY;
+}
+
+static void __exit lp_old98_exit(void)
+{
+#ifdef CONFIG_PC9800_OLDLP_CONSOLE
+	unregister_console(&lp_old98_console);
+#endif
+	unregister_chrdev(LP_MAJOR, "lp");
+
+	release_region(LP_PORT_DATA,   1);
+	release_region(LP_PORT_STATUS, 1);
+	release_region(LP_PORT_STROBE, 1);
+#ifdef	PC98_HW_H98
+	if (pc98_hw_flags & PC98_HW_H98)
+		release_region(LP_PORT_H98MODE, 1);
+#endif
+	release_region(LP_PORT_EXTMODE, 1);
+}
+
+#ifndef MODULE
+static int __init lp_old98_setup(char *str)
+{
+        int ints[4];
+
+        str = get_options(str, ARRAY_SIZE(ints), ints);
+        if (ints[0] > 0)
+		dc1_check = ints[1];
+        return 1;
+}
+__setup("lp_old98_dc1_check=", lp_old98_setup);
+#endif
+
+MODULE_PARM(dc1_check, "i");
+MODULE_AUTHOR("Kousuke Takai <[e-mail]>");
+MODULE_DESCRIPTION("PC-9800 old printer port driver");
+MODULE_LICENSE("GPL");
+
+module_init(lp_old98_init);
+module_exit(lp_old98_exit);
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.5.65/drivers/char/Makefile linux-2.5.65-ac2/drivers/char/Makefile
--- linux-2.5.65/drivers/char/Makefile	2003-03-18 16:46:47.000000000 +0000
+++ linux-2.5.65-ac2/drivers/char/Makefile	2003-03-18 16:57:58.000000000 +0000
@@ -44,6 +44,7 @@
 
 obj-$(CONFIG_PRINTER) += lp.o
 obj-$(CONFIG_TIPAR) += tipar.o
+obj-$(CONFIG_PC9800_OLDLP) += lp_old98.o
 
 obj-$(CONFIG_BUSMOUSE) += busmouse.o
 obj-$(CONFIG_DTLK) += dtlk.o