Re: IDE problem in 2.4.21-pre1 --> pre6

Brad Campbell (brad@seme.com.au)
Thu, 27 Mar 2003 09:52:02 +0800


Brad Campbell wrote:
> G'day all,
>
> Just upgraded a system I am developing from 2.4.20 to 2.4.21-preX and
> noticed this 20 second hang with ide on bootup.
>
Problem still exists in -pre6 (released about an hour before my previous
E-mail)
I also tried ide0=reset to reset the ide bus in case the 2.4.19 kernel
had left it in some strange state.
Tried with the VIA driver compiled in also.. No joy..

Included hdparm -i /dev/hda ; hdparm -I /dev/hda and /proc/pci below.

/home/service # hdparm -i /dev/hda

/dev/hda:

Model=APACER_CF_32MB, FwRev=verB.65, SerialNo=02-86912507
Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
RawCHS=123/16/32, TrkSize=16384, SectSize=512, ECCbytes=4
BuffType=DualPort, BuffSize=1kB, MaxMultSect=1, MultSect=off
CurCHS=123/16/32, CurSects=62976, LBA=yes, LBAsects=62976
IORDY=no
PIO modes: pio0 pio1 pio2
AdvancedPM=no

/home/service # hdparm -I /dev/hda

/dev/hda:

CompactFlash ATA device, with removable media
Model Number: APACER_CF_32MB
Serial Number: 02-86912507
Firmware Revision: verB.65
Standards:
Likely used: 4
Configuration:
Logical max current
cylinders 123 123
heads 16 16
sectors/track 32 32
--
bytes/track: 16384 bytes/sector: 512
CHS current addressable sectors: 62976
LBA user addressable sectors: 62976
device size with M = 1024*1024: 30 MBytes
device size with M = 1000*1000: 32 MBytes
Capabilities:
LBA, IORDY(may be)(cannot be disabled)
Buffer size: 1.0kB bytes avail on r/w long: 4 Queue
depth: 1
Standby timer values: spec'd by Vendor
R/W multiple sector transfer: Max = 1 Current = 0
DMA: not supported
PIO: pio0 pio1 pio2

/home/service # cat /proc/pci

PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 5).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
(rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 17, function 0:
ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 16).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
(rev 6).
Master Capable. Latency=32.
I/O at 0xd000 [0xd00f].
Bus 0, device 17, function 2:
USB Controller: VIA Technologies, Inc. USB (rev 30).
IRQ 3.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 17, function 3:
USB Controller: VIA Technologies, Inc. USB (#2) (rev 30).
IRQ 3.
Master Capable. Latency=32.
I/O at 0xd800 [0xd81f].
Bus 0, device 17, function 4:
Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 16).
Bus 0, device 17, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 64).
IRQ 10.
I/O at 0xdc00 [0xdcff].
I/O at 0xe000 [0xe003].
I/O at 0xe400 [0xe403].
Bus 0, device 18, function 0:
Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 81).
IRQ 11.
Master Capable. Latency=32. Min Gnt=3.Max Lat=8.
I/O at 0xe800 [0xe8ff].
Non-prefetchable 32 bit memory at 0xe3000000 [0xe30000ff].
Bus 0, device 20, function 0:
Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550
UART) (rev 1).
IRQ 5.
I/O at 0xec00 [0xec1f].
Bus 1, device 0, function 0:
VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev
106).
IRQ 11.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xe1800000 [0xe1ffffff].
Non-prefetchable 32 bit memory at 0xe2000000 [0xe201ffff].
Non-prefetchable 32 bit memory at 0xe1000000 [0xe17fffff].

-- 
Brad....
  /"\
  \ /     ASCII RIBBON CAMPAIGN
   X      AGAINST HTML MAIL
  / \

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/